Title 49

PART 192

Part 192 - Transportation Of Natural And Other Gas By Pipeline: Minimum Federal Safety Standards

PART 192 - TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Authority:30 U.S.C. 185(w)(3), 49 U.S.C. 5103, 60101 et. seq., and 49 CFR 1.97. Source:35 FR 13257, Aug. 19, 1970, unless otherwise noted. Editorial Note:Nomenclature changes to part 192 appear at 71 FR 33406, June 9, 2006.

• Authority: 30 U.S.C. 185(w)(3), 49 U.S.C. 5103, 60101 et. seq., and 49 CFR 1.97.
• Source: 35 FR 13257, Aug. 19, 1970, unless otherwise noted.

49:3.1.1.2.8.1	SUBPART A	Subpart A - General
49:3.1.1.2.8.1.8.1	SECTION 192.1	192.1 What is the scope of this part
49:3.1.1.2.8.1.8.2	SECTION 192.3	192.3 Definitions.
49:3.1.1.2.8.1.8.3	SECTION 192.5	192.5 Class locations.
49:3.1.1.2.8.1.8.4	SECTION 192.7	192.7 What documents are incorporated by reference partly or wholly in this part
49:3.1.1.2.8.1.8.5	SECTION 192.8	192.8 How are onshore gathering lines and regulated onshore gathering lines determined
49:3.1.1.2.8.1.8.6	SECTION 192.9	192.9 What requirements apply to gathering lines
49:3.1.1.2.8.1.8.7	SECTION 192.10	192.10 Outer continental shelf pipelines.
49:3.1.1.2.8.1.8.8	SECTION 192.11	192.11 Petroleum gas systems.
49:3.1.1.2.8.1.8.9	SECTION 192.12	192.12 Underground natural gas storage facilities.
49:3.1.1.2.8.1.8.10	SECTION 192.13	192.13 What general requirements apply to pipelines regulated under this part
49:3.1.1.2.8.1.8.11	SECTION 192.14	192.14 Conversion to service subject to this part.
49:3.1.1.2.8.1.8.12	SECTION 192.15	192.15 Rules of regulatory construction.
49:3.1.1.2.8.1.8.13	SECTION 192.16	192.16 Customer notification.
49:3.1.1.2.8.1.8.14	SECTION 192.18	192.18 How to notify PHMSA.
49:3.1.1.2.8.2	SUBPART B	Subpart B - Materials
49:3.1.1.2.8.2.8.1	SECTION 192.51	192.51 Scope.
49:3.1.1.2.8.2.8.2	SECTION 192.53	192.53 General.
49:3.1.1.2.8.2.8.3	SECTION 192.55	192.55 Steel pipe.
49:3.1.1.2.8.2.8.4	SECTION 192.57	192.57 [Reserved]
49:3.1.1.2.8.2.8.5	SECTION 192.59	192.59 Plastic pipe.
49:3.1.1.2.8.2.8.6	SECTION 192.61	192.61 [Reserved]
49:3.1.1.2.8.2.8.7	SECTION 192.63	192.63 Marking of materials.
49:3.1.1.2.8.2.8.8	SECTION 192.65	192.65 Transportation of pipe.
49:3.1.1.2.8.2.8.9	SECTION 192.67	192.67 Records: Material properties.
49:3.1.1.2.8.2.8.10	SECTION 192.69	192.69 Storage and handling of plastic pipe and associated components.
49:3.1.1.2.8.3	SUBPART C	Subpart C - Pipe Design
49:3.1.1.2.8.3.8.1	SECTION 192.101	192.101 Scope.
49:3.1.1.2.8.3.8.2	SECTION 192.103	192.103 General.
49:3.1.1.2.8.3.8.3	SECTION 192.105	192.105 Design formula for steel pipe.
49:3.1.1.2.8.3.8.4	SECTION 192.107	192.107 Yield strength (S) for steel pipe.
49:3.1.1.2.8.3.8.5	SECTION 192.109	192.109 Nominal wall thickness (t) for steel pipe.
49:3.1.1.2.8.3.8.6	SECTION 192.111	192.111 Design factor (F) for steel pipe.
49:3.1.1.2.8.3.8.7	SECTION 192.112	192.112 Additional design requirements for steel pipe using alternative maximum allowable operating pressure.
49:3.1.1.2.8.3.8.8	SECTION 192.113	192.113 Longitudinal joint factor (E) for steel pipe.
49:3.1.1.2.8.3.8.9	SECTION 192.115	192.115 Temperature derating factor (T) for steel pipe.
49:3.1.1.2.8.3.8.10	SECTION 192.117-192.119	192.117-192.119 [Reserved]
49:3.1.1.2.8.3.8.11	SECTION 192.121	192.121 Design of plastic pipe.
49:3.1.1.2.8.3.8.12	SECTION 192.123	192.123 [Reserved]
49:3.1.1.2.8.3.8.13	SECTION 192.125	192.125 Design of copper pipe.
49:3.1.1.2.8.3.8.14	SECTION 192.127	192.127 Records: Pipe design.
49:3.1.1.2.8.4	SUBPART D	Subpart D - Design of Pipeline Components
49:3.1.1.2.8.4.8.1	SECTION 192.141	192.141 Scope.
49:3.1.1.2.8.4.8.2	SECTION 192.143	192.143 General requirements.
49:3.1.1.2.8.4.8.3	SECTION 192.144	192.144 Qualifying metallic components.
49:3.1.1.2.8.4.8.4	SECTION 192.145	192.145 Valves.
49:3.1.1.2.8.4.8.5	SECTION 192.147	192.147 Flanges and flange accessories.
49:3.1.1.2.8.4.8.6	SECTION 192.149	192.149 Standard fittings.
49:3.1.1.2.8.4.8.7	SECTION 192.150	192.150 Passage of internal inspection devices.
49:3.1.1.2.8.4.8.8	SECTION 192.151	192.151 Tapping.
49:3.1.1.2.8.4.8.9	SECTION 192.153	192.153 Components fabricated by welding.
49:3.1.1.2.8.4.8.10	SECTION 192.155	192.155 Welded branch connections.
49:3.1.1.2.8.4.8.11	SECTION 192.157	192.157 Extruded outlets.
49:3.1.1.2.8.4.8.12	SECTION 192.159	192.159 Flexibility.
49:3.1.1.2.8.4.8.13	SECTION 192.161	192.161 Supports and anchors.
49:3.1.1.2.8.4.8.14	SECTION 192.163	192.163 Compressor stations: Design and construction.
49:3.1.1.2.8.4.8.15	SECTION 192.165	192.165 Compressor stations: Liquid removal.
49:3.1.1.2.8.4.8.16	SECTION 192.167	192.167 Compressor stations: Emergency shutdown.
49:3.1.1.2.8.4.8.17	SECTION 192.169	192.169 Compressor stations: Pressure limiting devices.
49:3.1.1.2.8.4.8.18	SECTION 192.171	192.171 Compressor stations: Additional safety equipment.
49:3.1.1.2.8.4.8.19	SECTION 192.173	192.173 Compressor stations: Ventilation.
49:3.1.1.2.8.4.8.20	SECTION 192.175	192.175 Pipe-type and bottle-type holders.
49:3.1.1.2.8.4.8.21	SECTION 192.177	192.177 Additional provisions for bottle-type holders.
49:3.1.1.2.8.4.8.22	SECTION 192.179	192.179 Transmission line valves.
49:3.1.1.2.8.4.8.23	SECTION 192.181	192.181 Distribution line valves.
49:3.1.1.2.8.4.8.24	SECTION 192.183	192.183 Vaults: Structural design requirements.
49:3.1.1.2.8.4.8.25	SECTION 192.185	192.185 Vaults: Accessibility.
49:3.1.1.2.8.4.8.26	SECTION 192.187	192.187 Vaults: Sealing, venting, and ventilation.
49:3.1.1.2.8.4.8.27	SECTION 192.189	192.189 Vaults: Drainage and waterproofing.
49:3.1.1.2.8.4.8.28	SECTION 192.191	192.191 [Reserved]
49:3.1.1.2.8.4.8.29	SECTION 192.193	192.193 Valve installation in plastic pipe.
49:3.1.1.2.8.4.8.30	SECTION 192.195	192.195 Protection against accidental overpressuring.
49:3.1.1.2.8.4.8.31	SECTION 192.197	192.197 Control of the pressure of gas delivered from high-pressure distribution systems.
49:3.1.1.2.8.4.8.32	SECTION 192.199	192.199 Requirements for design of pressure relief and limiting devices.
49:3.1.1.2.8.4.8.33	SECTION 192.201	192.201 Required capacity of pressure relieving and limiting stations.
49:3.1.1.2.8.4.8.34	SECTION 192.203	192.203 Instrument, control, and sampling pipe and components.
49:3.1.1.2.8.4.8.35	SECTION 192.204	192.204 Risers installed after January 22, 2019.
49:3.1.1.2.8.4.8.36	SECTION 192.205	192.205 Records: Pipeline components.
49:3.1.1.2.8.5	SUBPART E	Subpart E - Welding of Steel in Pipelines
49:3.1.1.2.8.5.8.1	SECTION 192.221	192.221 Scope.
49:3.1.1.2.8.5.8.2	SECTION 192.225	192.225 Welding procedures.
49:3.1.1.2.8.5.8.3	SECTION 192.227	192.227 Qualification of welders and welding operators.
49:3.1.1.2.8.5.8.4	SECTION 192.229	192.229 Limitations on welders and welding operators.
49:3.1.1.2.8.5.8.5	SECTION 192.231	192.231 Protection from weather.
49:3.1.1.2.8.5.8.6	SECTION 192.233	192.233 Miter joints.
49:3.1.1.2.8.5.8.7	SECTION 192.235	192.235 Preparation for welding.
49:3.1.1.2.8.5.8.8	SECTION 192.241	192.241 Inspection and test of welds.
49:3.1.1.2.8.5.8.9	SECTION 192.243	192.243 Nondestructive testing.
49:3.1.1.2.8.5.8.10	SECTION 192.245	192.245 Repair or removal of defects.
49:3.1.1.2.8.6	SUBPART F	Subpart F - Joining of Materials Other Than by Welding
49:3.1.1.2.8.6.8.1	SECTION 192.271	192.271 Scope.
49:3.1.1.2.8.6.8.2	SECTION 192.273	192.273 General.
49:3.1.1.2.8.6.8.3	SECTION 192.275	192.275 Cast iron pipe.
49:3.1.1.2.8.6.8.4	SECTION 192.277	192.277 Ductile iron pipe.
49:3.1.1.2.8.6.8.5	SECTION 192.279	192.279 Copper pipe.
49:3.1.1.2.8.6.8.6	SECTION 192.281	192.281 Plastic pipe.
49:3.1.1.2.8.6.8.7	SECTION 192.283	192.283 Plastic pipe: Qualifying joining procedures.
49:3.1.1.2.8.6.8.8	SECTION 192.285	192.285 Plastic pipe: Qualifying persons to make joints.
49:3.1.1.2.8.6.8.9	SECTION 192.287	192.287 Plastic pipe: Inspection of joints.
49:3.1.1.2.8.7	SUBPART G	Subpart G - General Construction Requirements for Transmission Lines and Mains
49:3.1.1.2.8.7.8.1	SECTION 192.301	192.301 Scope.
49:3.1.1.2.8.7.8.2	SECTION 192.303	192.303 Compliance with specifications or standards.
49:3.1.1.2.8.7.8.3	SECTION 192.305	192.305 Inspection: General.
49:3.1.1.2.8.7.8.5	SECTION 192.307	192.307 Inspection of materials.
49:3.1.1.2.8.7.8.6	SECTION 192.309	192.309 Repair of steel pipe.
49:3.1.1.2.8.7.8.7	SECTION 192.311	192.311 Repair of plastic pipe.
49:3.1.1.2.8.7.8.8	SECTION 192.313	192.313 Bends and elbows.
49:3.1.1.2.8.7.8.9	SECTION 192.315	192.315 Wrinkle bends in steel pipe.
49:3.1.1.2.8.7.8.10	SECTION 192.317	192.317 Protection from hazards.
49:3.1.1.2.8.7.8.11	SECTION 192.319	192.319 Installation of pipe in a ditch.
49:3.1.1.2.8.7.8.12	SECTION 192.321	192.321 Installation of plastic pipe.
49:3.1.1.2.8.7.8.13	SECTION 192.323	192.323 Casing.
49:3.1.1.2.8.7.8.14	SECTION 192.325	192.325 Underground clearance.
49:3.1.1.2.8.7.8.15	SECTION 192.327	192.327 Cover.
49:3.1.1.2.8.7.8.16	SECTION 192.328	192.328 Additional construction requirements for steel pipe using alternative maximum allowable operating pressure.
49:3.1.1.2.8.7.8.17	SECTION 192.329	192.329 Installation of plastic pipelines by trenchless excavation.
49:3.1.1.2.8.8	SUBPART H	Subpart H - Customer Meters, Service Regulators, and Service Lines
49:3.1.1.2.8.8.8.1	SECTION 192.351	192.351 Scope.
49:3.1.1.2.8.8.8.2	SECTION 192.353	192.353 Customer meters and regulators: Location.
49:3.1.1.2.8.8.8.3	SECTION 192.355	192.355 Customer meters and regulators: Protection from damage.
49:3.1.1.2.8.8.8.4	SECTION 192.357	192.357 Customer meters and regulators: Installation.
49:3.1.1.2.8.8.8.5	SECTION 192.359	192.359 Customer meter installations: Operating pressure.
49:3.1.1.2.8.8.8.6	SECTION 192.361	192.361 Service lines: Installation.
49:3.1.1.2.8.8.8.7	SECTION 192.363	192.363 Service lines: Valve requirements.
49:3.1.1.2.8.8.8.8	SECTION 192.365	192.365 Service lines: Location of valves.
49:3.1.1.2.8.8.8.9	SECTION 192.367	192.367 Service lines: General requirements for connections to main piping.
49:3.1.1.2.8.8.8.10	SECTION 192.369	192.369 Service lines: Connections to cast iron or ductile iron mains.
49:3.1.1.2.8.8.8.11	SECTION 192.371	192.371 Service lines: Steel.
49:3.1.1.2.8.8.8.12	SECTION 192.373	192.373 Service lines: Cast iron and ductile iron.
49:3.1.1.2.8.8.8.13	SECTION 192.375	192.375 Service lines: Plastic.
49:3.1.1.2.8.8.8.14	SECTION 192.376	192.376 Installation of plastic service lines by trenchless excavation.
49:3.1.1.2.8.8.8.15	SECTION 192.377	192.377 Service lines: Copper.
49:3.1.1.2.8.8.8.16	SECTION 192.379	192.379 New service lines not in use.
49:3.1.1.2.8.8.8.17	SECTION 192.381	192.381 Service lines: Excess flow valve performance standards.
49:3.1.1.2.8.8.8.18	SECTION 192.383	192.383 Excess flow valve installation.
49:3.1.1.2.8.8.8.19	SECTION 192.385	192.385 Manual service line shut-off valve installation.
49:3.1.1.2.8.9	SUBPART I	Subpart I - Requirements for Corrosion Control
49:3.1.1.2.8.9.8.1	SECTION 192.451	192.451 Scope.
49:3.1.1.2.8.9.8.2	SECTION 192.452	192.452 How does this subpart apply to converted pipelines and regulated onshore gathering lines
49:3.1.1.2.8.9.8.3	SECTION 192.453	192.453 General.
49:3.1.1.2.8.9.8.4	SECTION 192.455	192.455 External corrosion control: Buried or submerged pipelines installed after July 31, 1971.
49:3.1.1.2.8.9.8.5	SECTION 192.457	192.457 External corrosion control: Buried or submerged pipelines installed before August 1, 1971.
49:3.1.1.2.8.9.8.6	SECTION 192.459	192.459 External corrosion control: Examination of buried pipeline when exposed.
49:3.1.1.2.8.9.8.7	SECTION 192.461	192.461 External corrosion control: Protective coating.
49:3.1.1.2.8.9.8.8	SECTION 192.463	192.463 External corrosion control: Cathodic protection.
49:3.1.1.2.8.9.8.9	SECTION 192.465	192.465 External corrosion control: Monitoring.
49:3.1.1.2.8.9.8.10	SECTION 192.467	192.467 External corrosion control: Electrical isolation.
49:3.1.1.2.8.9.8.11	SECTION 192.469	192.469 External corrosion control: Test stations.
49:3.1.1.2.8.9.8.12	SECTION 192.471	192.471 External corrosion control: Test leads.
49:3.1.1.2.8.9.8.13	SECTION 192.473	192.473 External corrosion control: Interference currents.
49:3.1.1.2.8.9.8.14	SECTION 192.475	192.475 Internal corrosion control: General.
49:3.1.1.2.8.9.8.15	SECTION 192.476	192.476 Internal corrosion control: Design and construction of transmission line.
49:3.1.1.2.8.9.8.16	SECTION 192.477	192.477 Internal corrosion control: Monitoring.
49:3.1.1.2.8.9.8.17	SECTION 192.479	192.479 Atmospheric corrosion control: General.
49:3.1.1.2.8.9.8.18	SECTION 192.481	192.481 Atmospheric corrosion control: Monitoring.
49:3.1.1.2.8.9.8.19	SECTION 192.483	192.483 Remedial measures: General.
49:3.1.1.2.8.9.8.20	SECTION 192.485	192.485 Remedial measures: Transmission lines.
49:3.1.1.2.8.9.8.21	SECTION 192.487	192.487 Remedial measures: Distribution lines other than cast iron or ductile iron lines.
49:3.1.1.2.8.9.8.22	SECTION 192.489	192.489 Remedial measures: Cast iron and ductile iron pipelines.
49:3.1.1.2.8.9.8.23	SECTION 192.490	192.490 Direct assessment.
49:3.1.1.2.8.9.8.24	SECTION 192.491	192.491 Corrosion control records.
49:3.1.1.2.8.9.8.25	SECTION 192.493	192.493 In-line inspection of pipelines.
49:3.1.1.2.8.10	SUBPART J	Subpart J - Test Requirements
49:3.1.1.2.8.10.8.1	SECTION 192.501	192.501 Scope.
49:3.1.1.2.8.10.8.2	SECTION 192.503	192.503 General requirements.
49:3.1.1.2.8.10.8.3	SECTION 192.505	192.505 Strength test requirements for steel pipeline to operate at a hoop stress of 30 percent or more of SMYS.
49:3.1.1.2.8.10.8.4	SECTION 192.506	192.506 Transmission lines: Spike hydrostatic pressure test.
49:3.1.1.2.8.10.8.5	SECTION 192.507	192.507 Test requirements for pipelines to operate at a hoop stress less than 30 percent of SMYS and at or above 100 p.s.i. (689 kPa) gage.
49:3.1.1.2.8.10.8.6	SECTION 192.509	192.509 Test requirements for pipelines to operate below 100 p.s.i. (689 kPa) gage.
49:3.1.1.2.8.10.8.7	SECTION 192.511	192.511 Test requirements for service lines.
49:3.1.1.2.8.10.8.8	SECTION 192.513	192.513 Test requirements for plastic pipelines.
49:3.1.1.2.8.10.8.9	SECTION 192.515	192.515 Environmental protection and safety requirements.
49:3.1.1.2.8.10.8.10	SECTION 192.517	192.517 Records.
49:3.1.1.2.8.11	SUBPART K	Subpart K - Uprating
49:3.1.1.2.8.11.8.1	SECTION 192.551	192.551 Scope.
49:3.1.1.2.8.11.8.2	SECTION 192.553	192.553 General requirements.
49:3.1.1.2.8.11.8.3	SECTION 192.555	192.555 Uprating to a pressure that will produce a hoop stress of 30 percent or more of SMYS in steel pipelines.
49:3.1.1.2.8.11.8.4	SECTION 192.557	192.557 Uprating: Steel pipelines to a pressure that will produce a hoop stress less than 30 percent of SMYS: plastic, cast iron, and ductile iron pipelines.
49:3.1.1.2.8.12	SUBPART L	Subpart L - Operations
49:3.1.1.2.8.12.8.1	SECTION 192.601	192.601 Scope.
49:3.1.1.2.8.12.8.2	SECTION 192.603	192.603 General provisions.
49:3.1.1.2.8.12.8.3	SECTION 192.605	192.605 Procedural manual for operations, maintenance, and emergencies.
49:3.1.1.2.8.12.8.4	SECTION 192.607	192.607 Verification of Pipeline Material Properties and Attributes: Onshore steel transmission pipelines.
49:3.1.1.2.8.12.8.5	SECTION 192.609	192.609 Change in class location: Required study.
49:3.1.1.2.8.12.8.6	SECTION 192.611	192.611 Change in class location: Confirmation or revision of maximum allowable operating pressure.
49:3.1.1.2.8.12.8.7	SECTION 192.612	192.612 Underwater inspection and reburial of pipelines in the Gulf of Mexico and its inlets.
49:3.1.1.2.8.12.8.8	SECTION 192.613	192.613 Continuing surveillance.
49:3.1.1.2.8.12.8.9	SECTION 192.614	192.614 Damage prevention program.
49:3.1.1.2.8.12.8.10	SECTION 192.615	192.615 Emergency plans.
49:3.1.1.2.8.12.8.11	SECTION 192.616	192.616 Public awareness.
49:3.1.1.2.8.12.8.12	SECTION 192.617	192.617 Investigation of failures.
49:3.1.1.2.8.12.8.13	SECTION 192.619	192.619 Maximum allowable operating pressure: Steel or plastic pipelines.
49:3.1.1.2.8.12.8.14	SECTION 192.620	192.620 Alternative maximum allowable operating pressure for certain steel pipelines.
49:3.1.1.2.8.12.8.15	SECTION 192.621	192.621 Maximum allowable operating pressure: High-pressure distribution systems.
49:3.1.1.2.8.12.8.16	SECTION 192.623	192.623 Maximum and minimum allowable operating pressure; Low-pressure distribution systems.
49:3.1.1.2.8.12.8.17	SECTION 192.624	192.624 Maximum allowable operating pressure reconfirmation: Onshore steel transmission pipelines.
49:3.1.1.2.8.12.8.18	SECTION 192.625	192.625 Odorization of gas.
49:3.1.1.2.8.12.8.19	SECTION 192.627	192.627 Tapping pipelines under pressure.
49:3.1.1.2.8.12.8.20	SECTION 192.629	192.629 Purging of pipelines.
49:3.1.1.2.8.12.8.21	SECTION 192.631	192.631 Control room management.
49:3.1.1.2.8.12.8.22	SECTION 192.632	192.632 Engineering Critical Assessment for Maximum Allowable Operating Pressure Reconfirmation: Onshore steel transmission pipelines.
49:3.1.1.2.8.13	SUBPART M	Subpart M - Maintenance
49:3.1.1.2.8.13.8.1	SECTION 192.701	192.701 Scope.
49:3.1.1.2.8.13.8.2	SECTION 192.703	192.703 General.
49:3.1.1.2.8.13.8.3	SECTION 192.705	192.705 Transmission lines: Patrolling.
49:3.1.1.2.8.13.8.4	SECTION 192.706	192.706 Transmission lines: Leakage surveys.
49:3.1.1.2.8.13.8.5	SECTION 192.707	192.707 Line markers for mains and transmission lines.
49:3.1.1.2.8.13.8.6	SECTION 192.709	192.709 Transmission lines: Record keeping.
49:3.1.1.2.8.13.8.7	SECTION 192.710	192.710 Transmission lines: Assessments outside of high consequence areas.
49:3.1.1.2.8.13.8.8	SECTION 192.711	192.711 Transmission lines: General requirements for repair procedures.
49:3.1.1.2.8.13.8.9	SECTION 192.712	192.712 Analysis of predicted failure pressure.
49:3.1.1.2.8.13.8.10	SECTION 192.713	192.713 Transmission lines: Permanent field repair of imperfections and damages.
49:3.1.1.2.8.13.8.11	SECTION 192.715	192.715 Transmission lines: Permanent field repair of welds.
49:3.1.1.2.8.13.8.12	SECTION 192.717	192.717 Transmission lines: Permanent field repair of leaks.
49:3.1.1.2.8.13.8.13	SECTION 192.719	192.719 Transmission lines: Testing of repairs.
49:3.1.1.2.8.13.8.14	SECTION 192.720	192.720 Distribution systems: Leak repair.
49:3.1.1.2.8.13.8.15	SECTION 192.721	192.721 Distribution systems: Patrolling.
49:3.1.1.2.8.13.8.16	SECTION 192.723	192.723 Distribution systems: Leakage surveys.
49:3.1.1.2.8.13.8.17	SECTION 192.725	192.725 Test requirements for reinstating service lines.
49:3.1.1.2.8.13.8.18	SECTION 192.727	192.727 Abandonment or deactivation of facilities.
49:3.1.1.2.8.13.8.19	SECTION 192.731	192.731 Compressor stations: Inspection and testing of relief devices.
49:3.1.1.2.8.13.8.20	SECTION 192.735	192.735 Compressor stations: Storage of combustible materials.
49:3.1.1.2.8.13.8.21	SECTION 192.736	192.736 Compressor stations: Gas detection.
49:3.1.1.2.8.13.8.22	SECTION 192.739	192.739 Pressure limiting and regulating stations: Inspection and testing.
49:3.1.1.2.8.13.8.23	SECTION 192.740	192.740 Pressure regulating, limiting, and overpressure protection - Individual service lines directly connected to production, gathering, or transmission pipelines.
49:3.1.1.2.8.13.8.24	SECTION 192.741	192.741 Pressure limiting and regulating stations: Telemetering or recording gauges.
49:3.1.1.2.8.13.8.25	SECTION 192.743	192.743 Pressure limiting and regulating stations: Capacity of relief devices.
49:3.1.1.2.8.13.8.26	SECTION 192.745	192.745 Valve maintenance: Transmission lines.
49:3.1.1.2.8.13.8.27	SECTION 192.747	192.747 Valve maintenance: Distribution systems.
49:3.1.1.2.8.13.8.28	SECTION 192.749	192.749 Vault maintenance.
49:3.1.1.2.8.13.8.29	SECTION 192.750	192.750 Launcher and receiver safety.
49:3.1.1.2.8.13.8.30	SECTION 192.751	192.751 Prevention of accidental ignition.
49:3.1.1.2.8.13.8.31	SECTION 192.753	192.753 Caulked bell and spigot joints.
49:3.1.1.2.8.13.8.32	SECTION 192.755	192.755 Protecting cast-iron pipelines.
49:3.1.1.2.8.13.8.33	SECTION 192.756	192.756 Joining plastic pipe by heat fusion; equipment maintenance and calibration.
49:3.1.1.2.8.14	SUBPART N	Subpart N - Qualification of Pipeline Personnel
49:3.1.1.2.8.14.8.1	SECTION 192.801	192.801 Scope.
49:3.1.1.2.8.14.8.2	SECTION 192.803	192.803 Definitions.
49:3.1.1.2.8.14.8.3	SECTION 192.805	192.805 Qualification program.
49:3.1.1.2.8.14.8.4	SECTION 192.807	192.807 Recordkeeping.
49:3.1.1.2.8.14.8.5	SECTION 192.809	192.809 General.
49:3.1.1.2.8.15	SUBPART O	Subpart O - Gas Transmission Pipeline Integrity Management
49:3.1.1.2.8.15.8.1	SECTION 192.901	192.901 What do the regulations in this subpart cover
49:3.1.1.2.8.15.8.2	SECTION 192.903	192.903 What definitions apply to this subpart
49:3.1.1.2.8.15.8.3	SECTION 192.905	192.905 How does an operator identify a high consequence area
49:3.1.1.2.8.15.8.4	SECTION 192.907	192.907 What must an operator do to implement this subpart
49:3.1.1.2.8.15.8.5	SECTION 192.909	192.909 How can an operator change its integrity management program
49:3.1.1.2.8.15.8.6	SECTION 192.911	192.911 What are the elements of an integrity management program
49:3.1.1.2.8.15.8.7	SECTION 192.913	192.913 When may an operator deviate its program from certain requirements of this subpart
49:3.1.1.2.8.15.8.8	SECTION 192.915	192.915 What knowledge and training must personnel have to carry out an integrity management program
49:3.1.1.2.8.15.8.9	SECTION 192.917	192.917 How does an operator identify potential threats to pipeline integrity and use the threat identification in its integrity program
49:3.1.1.2.8.15.8.10	SECTION 192.919	192.919 What must be in the baseline assessment plan
49:3.1.1.2.8.15.8.11	SECTION 192.921	192.921 How is the baseline assessment to be conducted
49:3.1.1.2.8.15.8.12	SECTION 192.923	192.923 How is direct assessment used and for what threats
49:3.1.1.2.8.15.8.13	SECTION 192.925	192.925 What are the requirements for using External Corrosion Direct Assessment (ECDA)
49:3.1.1.2.8.15.8.14	SECTION 192.927	192.927 What are the requirements for using Internal Corrosion Direct Assessment (ICDA)
49:3.1.1.2.8.15.8.15	SECTION 192.929	192.929 What are the requirements for using Direct Assessment for Stress Corrosion Cracking (SCCDA)
49:3.1.1.2.8.15.8.16	SECTION 192.931	192.931 How may Confirmatory Direct Assessment (CDA) be used
49:3.1.1.2.8.15.8.17	SECTION 192.933	192.933 What actions must be taken to address integrity issues
49:3.1.1.2.8.15.8.18	SECTION 192.935	192.935 What additional preventive and mitigative measures must an operator take
49:3.1.1.2.8.15.8.19	SECTION 192.937	192.937 What is a continual process of evaluation and assessment to maintain a pipeline's integrity
49:3.1.1.2.8.15.8.20	SECTION 192.939	192.939 What are the required reassessment intervals
49:3.1.1.2.8.15.8.21	SECTION 192.941	192.941 What is a low stress reassessment
49:3.1.1.2.8.15.8.22	SECTION 192.943	192.943 When can an operator deviate from these reassessment intervals
49:3.1.1.2.8.15.8.23	SECTION 192.945	192.945 What methods must an operator use to measure program effectiveness
49:3.1.1.2.8.15.8.24	SECTION 192.947	192.947 What records must an operator keep
49:3.1.1.2.8.15.8.25	SECTION 192.949	192.949 [Reserved]
49:3.1.1.2.8.15.8.26	SECTION 192.951	192.951 Where does an operator file a report
49:3.1.1.2.8.16	SUBPART P	Subpart P - Gas Distribution Pipeline Integrity Management (IM)
49:3.1.1.2.8.16.8.1	SECTION 192.1001	192.1001 What definitions apply to this subpart
49:3.1.1.2.8.16.8.2	SECTION 192.1003	192.1003 What do the regulations in this subpart cover
49:3.1.1.2.8.16.8.3	SECTION 192.1005	192.1005 What must a gas distribution operator (other than a master meter or small LPG operator) do to implement this subpart
49:3.1.1.2.8.16.8.4	SECTION 192.1007	192.1007 What are the required elements of an integrity management plan
49:3.1.1.2.8.16.8.5	SECTION 192.1009	192.1009 What must an operator report when a mechanical fitting fails
49:3.1.1.2.8.16.8.6	SECTION 192.1011	192.1011 What records must an operator keep
49:3.1.1.2.8.16.8.7	SECTION 192.1013	192.1013 When may an operator deviate from required periodic inspections under this part
49:3.1.1.2.8.16.8.8	SECTION 192.1015	192.1015 What must a master meter or small liquefied petroleum gas (LPG) operator do to implement this subpart
49:3.1.1.2.8.17	SUBPART 0
49:3.1.1.2.8.18.8.1.14	APPENDIX Appendix A	Appendix A to Part 192 [Reserved]
49:3.1.1.2.8.18.8.1.15	APPENDIX Appendix B	Appendix B to Part 192 - Qualification of Pipe and Components
49:3.1.1.2.8.18.8.1.16	APPENDIX Appendix C	Appendix C to Part 192 - Qualification of Welders for Low Stress Level Pipe
49:3.1.1.2.8.18.8.1.17	APPENDIX Appendix D	Appendix D to Part 192 - Criteria for Cathodic Protection and Determination of Measurements
49:3.1.1.2.8.18.8.1.18	APPENDIX Appendix E	Appendix E to Part 192 - Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity Management Rule
49:3.1.1.2.8.18.8.1.19	APPENDIX Appendix F	Appendix F to Part 192 - Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)

---