Title 49

PART 192 SUBPART D

Subpart D - Design of Pipeline Components

49:3.1.1.2.8.4.8.1SECTION 192.141
   192.141 Scope.
49:3.1.1.2.8.4.8.2SECTION 192.143
   192.143 General requirements.
49:3.1.1.2.8.4.8.3SECTION 192.144
   192.144 Qualifying metallic components.
49:3.1.1.2.8.4.8.4SECTION 192.145
   192.145 Valves.
49:3.1.1.2.8.4.8.5SECTION 192.147
   192.147 Flanges and flange accessories.
49:3.1.1.2.8.4.8.6SECTION 192.149
   192.149 Standard fittings.
49:3.1.1.2.8.4.8.7SECTION 192.150
   192.150 Passage of internal inspection devices.
49:3.1.1.2.8.4.8.8SECTION 192.151
   192.151 Tapping.
49:3.1.1.2.8.4.8.9SECTION 192.153
   192.153 Components fabricated by welding.
49:3.1.1.2.8.4.8.10SECTION 192.155
   192.155 Welded branch connections.
49:3.1.1.2.8.4.8.11SECTION 192.157
   192.157 Extruded outlets.
49:3.1.1.2.8.4.8.12SECTION 192.159
   192.159 Flexibility.
49:3.1.1.2.8.4.8.13SECTION 192.161
   192.161 Supports and anchors.
49:3.1.1.2.8.4.8.14SECTION 192.163
   192.163 Compressor stations: Design and construction.
49:3.1.1.2.8.4.8.15SECTION 192.165
   192.165 Compressor stations: Liquid removal.
49:3.1.1.2.8.4.8.16SECTION 192.167
   192.167 Compressor stations: Emergency shutdown.
49:3.1.1.2.8.4.8.17SECTION 192.169
   192.169 Compressor stations: Pressure limiting devices.
49:3.1.1.2.8.4.8.18SECTION 192.171
   192.171 Compressor stations: Additional safety equipment.
49:3.1.1.2.8.4.8.19SECTION 192.173
   192.173 Compressor stations: Ventilation.
49:3.1.1.2.8.4.8.20SECTION 192.175
   192.175 Pipe-type and bottle-type holders.
49:3.1.1.2.8.4.8.21SECTION 192.177
   192.177 Additional provisions for bottle-type holders.
49:3.1.1.2.8.4.8.22SECTION 192.179
   192.179 Transmission line valves.
49:3.1.1.2.8.4.8.23SECTION 192.181
   192.181 Distribution line valves.
49:3.1.1.2.8.4.8.24SECTION 192.183
   192.183 Vaults: Structural design requirements.
49:3.1.1.2.8.4.8.25SECTION 192.185
   192.185 Vaults: Accessibility.
49:3.1.1.2.8.4.8.26SECTION 192.187
   192.187 Vaults: Sealing, venting, and ventilation.
49:3.1.1.2.8.4.8.27SECTION 192.189
   192.189 Vaults: Drainage and waterproofing.
49:3.1.1.2.8.4.8.28SECTION 192.191
   192.191 [Reserved]
49:3.1.1.2.8.4.8.29SECTION 192.193
   192.193 Valve installation in plastic pipe.
49:3.1.1.2.8.4.8.30SECTION 192.195
   192.195 Protection against accidental overpressuring.
49:3.1.1.2.8.4.8.31SECTION 192.197
   192.197 Control of the pressure of gas delivered from high-pressure distribution systems.
49:3.1.1.2.8.4.8.32SECTION 192.199
   192.199 Requirements for design of pressure relief and limiting devices.
49:3.1.1.2.8.4.8.33SECTION 192.201
   192.201 Required capacity of pressure relieving and limiting stations.
49:3.1.1.2.8.4.8.34SECTION 192.203
   192.203 Instrument, control, and sampling pipe and components.
49:3.1.1.2.8.4.8.35SECTION 192.204
   192.204 Risers installed after January 22, 2019.
49:3.1.1.2.8.4.8.36SECTION 192.205
   192.205 xxx