| 49:3.1.1.1.1.0.1.1 | SECTION 178.1
| 178.1 Purpose and scope. | |
| 49:3.1.1.1.1.0.1.2 | SECTION 178.2
| 178.2 Applicability and responsibility. | |
| 49:3.1.1.1.1.0.1.3 | SECTION 178.3
| 178.3 Marking of packagings. | |
| 49:3.1.1.1.1.1 | SUBPART A
| Subpart A [Reserved] | |
| 49:3.1.1.1.1.2 | SUBPART B
| Subpart B - Specifications for Inside Containers, and Linings | |
| 49:3.1.1.1.1.2.1.1 | SECTION 178.33
| 178.33 Specification 2P; inner nonrefillable metal receptacles. | |
| 49:3.1.1.1.1.2.1.2 | SECTION 178.33-1
| 178.33-1 Compliance. | |
| 49:3.1.1.1.1.2.1.3 | SECTION 178.33-2
| 178.33-2 Type and size. | |
| 49:3.1.1.1.1.2.1.4 | SECTION 178.33-3
| 178.33-3 Inspection. | |
| 49:3.1.1.1.1.2.1.5 | SECTION 178.33-4
| 178.33-4 Duties of inspector. | |
| 49:3.1.1.1.1.2.1.6 | SECTION 178.33-5
| 178.33-5 Material. | |
| 49:3.1.1.1.1.2.1.7 | SECTION 178.33-6
| 178.33-6 Manufacture. | |
| 49:3.1.1.1.1.2.1.8 | SECTION 178.33-7
| 178.33-7 Wall thickness. | |
| 49:3.1.1.1.1.2.1.9 | SECTION 178.33-8
| 178.33-8 Tests. | |
| 49:3.1.1.1.1.2.1.10 | SECTION 178.33-9
| 178.33-9 Marking. | |
| 49:3.1.1.1.1.2.1.11 | SECTION 178.33a
| 178.33a Specification 2Q; inner nonrefillable metal receptacles. | |
| 49:3.1.1.1.1.2.1.12 | SECTION 178.33a-1
| 178.33a-1 Compliance. | |
| 49:3.1.1.1.1.2.1.13 | SECTION 178.33a-2
| 178.33a-2 Type and size. | |
| 49:3.1.1.1.1.2.1.14 | SECTION 178.33a-3
| 178.33a-3 Inspection. | |
| 49:3.1.1.1.1.2.1.15 | SECTION 178.33a-4
| 178.33a-4 Duties of inspector. | |
| 49:3.1.1.1.1.2.1.16 | SECTION 178.33a-5
| 178.33a-5 Material. | |
| 49:3.1.1.1.1.2.1.17 | SECTION 178.33a-6
| 178.33a-6 Manufacture. | |
| 49:3.1.1.1.1.2.1.18 | SECTION 178.33a-7
| 178.33a-7 Wall thickness. | |
| 49:3.1.1.1.1.2.1.19 | SECTION 178.33a-8
| 178.33a-8 Tests. | |
| 49:3.1.1.1.1.2.1.20 | SECTION 178.33a-9
| 178.33a-9 Marking. | |
| 49:3.1.1.1.1.2.1.21 | SECTION 178.33b
| 178.33b Specification 2S; inner nonrefillable plastic receptacles. | |
| 49:3.1.1.1.1.2.1.22 | SECTION 178.33b-1
| 178.33b-1 Compliance. | |
| 49:3.1.1.1.1.2.1.23 | SECTION 178.33b-2
| 178.33b-2 Type and size. | |
| 49:3.1.1.1.1.2.1.24 | SECTION 178.33b-3
| 178.33b-3 Inspection. | |
| 49:3.1.1.1.1.2.1.25 | SECTION 178.33b-4
| 178.33b-4 Duties of inspector. | |
| 49:3.1.1.1.1.2.1.26 | SECTION 178.33b-5
| 178.33b-5 Material. | |
| 49:3.1.1.1.1.2.1.27 | SECTION 178.33b-6
| 178.33b-6 Manufacture. | |
| 49:3.1.1.1.1.2.1.28 | SECTION 178.33b-7
| 178.33b-7 Design qualification test. | |
| 49:3.1.1.1.1.2.1.29 | SECTION 178.33b-8
| 178.33b-8 Production tests. | |
| 49:3.1.1.1.1.2.1.30 | SECTION 178.33b-9
| 178.33b-9 Marking. | |
| 49:3.1.1.1.1.2.1.31 | SECTION 178.33c
| 178.33c Specification 2P; inner nonrefillable metal receptacle variation. | |
| 49:3.1.1.1.1.2.1.32 | SECTION 178.33c-1
| 178.33c-1 Compliance. | |
| 49:3.1.1.1.1.2.1.33 | SECTION 178.33c-2
| 178.33c-2 Variation. | |
| 49:3.1.1.1.1.2.1.34 | SECTION 178.33d
| 178.33d Specification 2Q; inner nonrefillable metal receptacle variations. | |
| 49:3.1.1.1.1.2.1.35 | SECTION 178.33d-1
| 178.33d-1 Compliance. | |
| 49:3.1.1.1.1.2.1.36 | SECTION 178.33d-2
| 178.33d-2 Variation 1. | |
| 49:3.1.1.1.1.2.1.37 | SECTION 178.33d-3
| 178.33d-3 Variation 2. | |
| 49:3.1.1.1.1.3 | SUBPART C
| Subpart C - Specifications for Cylinders | |
| 49:3.1.1.1.1.3.1.1 | SECTION 178.35
| 178.35 General requirements for specification cylinders. | |
| 49:3.1.1.1.1.3.1.2 | SECTION 178.36
| 178.36 Specification 3A and 3AX seamless steel cylinders. | |
| 49:3.1.1.1.1.3.1.3 | SECTION 178.37
| 178.37 Specification 3AA and 3AAX seamless steel cylinders. | |
| 49:3.1.1.1.1.3.1.4 | SECTION 178.38
| 178.38 Specification 3B seamless steel cylinders. | |
| 49:3.1.1.1.1.3.1.5 | SECTION 178.39
| 178.39 Specification 3BN seamless nickel cylinders. | |
| 49:3.1.1.1.1.3.1.6 | SECTION 178.42
| 178.42 Specification 3E seamless steel cylinders. | |
| 49:3.1.1.1.1.3.1.7 | SECTION 178.44
| 178.44 Specification 3HT seamless steel cylinders for aircraft use. | |
| 49:3.1.1.1.1.3.1.8 | SECTION 178.45
| 178.45 Specification 3T seamless steel cylinder. | |
| 49:3.1.1.1.1.3.1.9 | SECTION 178.46
| 178.46 Specification 3AL seamless aluminum cylinders. | |
| 49:3.1.1.1.1.3.1.10 | SECTION 178.47
| 178.47 Specification 4DS welded stainless steel cylinders for aircraft use. | |
| 49:3.1.1.1.1.3.1.11 | SECTION 178.50
| 178.50 Specification 4B welded or brazed steel cylinders. | |
| 49:3.1.1.1.1.3.1.12 | SECTION 178.51
| 178.51 Specification 4BA welded or brazed steel cylinders. | |
| 49:3.1.1.1.1.3.1.13 | SECTION 178.53
| 178.53 Specification 4D welded steel cylinders for aircraft use. | |
| 49:3.1.1.1.1.3.1.14 | SECTION 178.55
| 178.55 Specification 4B240ET welded or brazed cylinders. | |
| 49:3.1.1.1.1.3.1.15 | SECTION 178.56
| 178.56 Specification 4AA480 welded steel cylinders. | |
| 49:3.1.1.1.1.3.1.16 | SECTION 178.57
| 178.57 Specification 4L welded insulated cylinders. | |
| 49:3.1.1.1.1.3.1.17 | SECTION 178.58
| 178.58 Specification 4DA welded steel cylinders for aircraft use. | |
| 49:3.1.1.1.1.3.1.18 | SECTION 178.59
| 178.59 Specification 8 steel cylinders with porous fillings for acetylene. | |
| 49:3.1.1.1.1.3.1.19 | SECTION 178.60
| 178.60 Specification 8AL steel cylinders with porous fillings for acetylene. | |
| 49:3.1.1.1.1.3.1.20 | SECTION 178.61
| 178.61 Specification 4BW welded steel cylinders with electric-arc welded seam. | |
| 49:3.1.1.1.1.3.1.21 | SECTION 178.65
| 178.65 Specification 39 non-reusable (non-refillable) cylinders. | |
| 49:3.1.1.1.1.3.1.22 | SECTION 178.68
| 178.68 Specification 4E welded aluminum cylinders. | |
| 49:3.1.1.1.1.3.1.23 | SECTION 178.69
| 178.69 Responsibilities and requirements for manufacturers of UN pressure receptacles. | |
| 49:3.1.1.1.1.3.1.24 | SECTION 178.70
| 178.70 Approval of UN pressure receptacles. | |
| 49:3.1.1.1.1.3.1.25 | SECTION 178.71
| 178.71 Specifications for UN pressure receptacles. | |
| 49:3.1.1.1.1.3.1.26 | SECTION 178.74
| 178.74 Approval of MEGCs. | |
| 49:3.1.1.1.1.3.1.27 | SECTION 178.75
| 178.75 Specifications for MEGCs. | |
| 49:3.1.1.1.1.3.1.28.1 | APPENDIX Appendix A
| Appendix A to Subpart C of Part 178 - Illustrations: Cylinder Tensile Sample | |
| 49:3.1.1.1.1.4 | SUBPART D
| Subparts D-G [Reserved] | |
| 49:3.1.1.1.1.5 | SUBPART H
| Subpart H - Specifications for Portable Tanks | |
| 49:3.1.1.1.1.5.1.1 | SECTION 178.251 - 178.253-5
| 178.251--178.253-5 [Reserved] | |
| 49:3.1.1.1.1.5.1.2 | SECTION 178.255
| 178.255 Specification 60; steel portable tanks. | |
| 49:3.1.1.1.1.5.1.3 | SECTION 178.255-1
| 178.255-1 General requirements. | |
| 49:3.1.1.1.1.5.1.4 | SECTION 178.255-2
| 178.255-2 Material. | |
| 49:3.1.1.1.1.5.1.5 | SECTION 178.255-3
| 178.255-3 Expansion domes. | |
| 49:3.1.1.1.1.5.1.6 | SECTION 178.255-4
| 178.255-4 Closures for manholes and domes. | |
| 49:3.1.1.1.1.5.1.7 | SECTION 178.255-5
| 178.255-5 Bottom discharge outlets. | |
| 49:3.1.1.1.1.5.1.8 | SECTION 178.255-6
| 178.255-6 Loading and unloading accessories. | |
| 49:3.1.1.1.1.5.1.9 | SECTION 178.255-7
| 178.255-7 Protection of valves and accessories. | |
| 49:3.1.1.1.1.5.1.10 | SECTION 178.255-8
| 178.255-8 Safety devices. | |
| 49:3.1.1.1.1.5.1.11 | SECTION 178.255-9
| 178.255-9 Compartments. | |
| 49:3.1.1.1.1.5.1.12 | SECTION 178.255-10
| 178.255-10 Lining. | |
| 49:3.1.1.1.1.5.1.13 | SECTION 178.255-11
| 178.255-11 Tank mountings. | |
| 49:3.1.1.1.1.5.1.14 | SECTION 178.255-12
| 178.255-12 Pressure test. | |
| 49:3.1.1.1.1.5.1.15 | SECTION 178.255-13
| 178.255-13 Repair of tanks. | |
| 49:3.1.1.1.1.5.1.16 | SECTION 178.255-14
| 178.255-14 Marking. | |
| 49:3.1.1.1.1.5.1.17 | SECTION 178.255-15
| 178.255-15 Report. | |
| 49:3.1.1.1.1.5.1.18 | SECTION 178.273
| 178.273 Approval of Specification UN portable tanks. | |
| 49:3.1.1.1.1.5.1.19 | SECTION 178.274
| 178.274 Specifications for UN portable tanks. | |
| 49:3.1.1.1.1.5.1.20 | SECTION 178.275
| 178.275 Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials. | |
| 49:3.1.1.1.1.5.1.21 | SECTION 178.276
| 178.276 Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of non-refrigerated liquefied compressed gases. | |
| 49:3.1.1.1.1.5.1.22 | SECTION 178.277
| 178.277 Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases. | |
| 49:3.1.1.1.1.6 | SUBPART I
| Subpart I [Reserved] | |
| 49:3.1.1.1.1.7 | SUBPART J
| Subpart J - Specifications for Containers for Motor Vehicle Transportation | |
| 49:3.1.1.1.1.7.1.1 | SECTION 178.318
| 178.318 Specification MC 201; container for detonators and percussion caps. | |
| 49:3.1.1.1.1.7.1.2 | SECTION 178.318-1
| 178.318-1 Scope. | |
| 49:3.1.1.1.1.7.1.3 | SECTION 178.318-2
| 178.318-2 Container. | |
| 49:3.1.1.1.1.7.1.4 | SECTION 178.318-3
| 178.318-3 Marking. | |
| 49:3.1.1.1.1.7.1.5 | SECTION 178.320
| 178.320 General requirements applicable to all DOT specification cargo tank motor vehicles. | |
| 49:3.1.1.1.1.7.1.6 | SECTION 178.337
| 178.337 Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter. | |
| 49:3.1.1.1.1.7.1.7 | SECTION 178.337-1
| 178.337-1 General requirements. | |
| 49:3.1.1.1.1.7.1.8 | SECTION 178.337-2
| 178.337-2 Material. | |
| 49:3.1.1.1.1.7.1.9 | SECTION 178.337-3
| 178.337-3 Structural integrity. | |
| 49:3.1.1.1.1.7.1.10 | SECTION 178.337-4
| 178.337-4 Joints. | |
| 49:3.1.1.1.1.7.1.11 | SECTION 178.337-5
| 178.337-5 Bulkheads, baffles and ring stiffeners. | |
| 49:3.1.1.1.1.7.1.12 | SECTION 178.337-6
| 178.337-6 Closure for manhole. | |
| 49:3.1.1.1.1.7.1.13 | SECTION 178.337-7
| 178.337-7 Overturn protection. | |
| 49:3.1.1.1.1.7.1.14 | SECTION 178.337-8
| 178.337-8 Openings, inlets, and outlets. | |
| 49:3.1.1.1.1.7.1.15 | SECTION 178.337-9
| 178.337-9 Pressure relief devices, piping, valves, hoses, and fittings. | |
| 49:3.1.1.1.1.7.1.16 | SECTION 178.337-10
| 178.337-10 Accident damage protection. | |
| 49:3.1.1.1.1.7.1.17 | SECTION 178.337-11
| 178.337-11 Emergency discharge control. | |
| 49:3.1.1.1.1.7.1.18 | SECTION 178.337-12
| 178.337-12 [Reserved] | |
| 49:3.1.1.1.1.7.1.19 | SECTION 178.337-13
| 178.337-13 Supporting and anchoring. | |
| 49:3.1.1.1.1.7.1.20 | SECTION 178.337-14
| 178.337-14 Gauging devices. | |
| 49:3.1.1.1.1.7.1.21 | SECTION 178.337-15
| 178.337-15 Pumps and compressors. | |
| 49:3.1.1.1.1.7.1.22 | SECTION 178.337-16
| 178.337-16 Testing. | |
| 49:3.1.1.1.1.7.1.23 | SECTION 178.337-17
| 178.337-17 Marking. | |
| 49:3.1.1.1.1.7.1.24 | SECTION 178.337-18
| 178.337-18 Certification. | |
| 49:3.1.1.1.1.7.1.25 | SECTION 178.338
| 178.338 Specification MC-338; insulated cargo tank motor vehicle. | |
| 49:3.1.1.1.1.7.1.26 | SECTION 178.338-1
| 178.338-1 General requirements. | |
| 49:3.1.1.1.1.7.1.27 | SECTION 178.338-2
| 178.338-2 Material. | |
| 49:3.1.1.1.1.7.1.28 | SECTION 178.338-3
| 178.338-3 Structural integrity. | |
| 49:3.1.1.1.1.7.1.29 | SECTION 178.338-4
| 178.338-4 Joints. | |
| 49:3.1.1.1.1.7.1.30 | SECTION 178.338-5
| 178.338-5 Stiffening rings. | |
| 49:3.1.1.1.1.7.1.31 | SECTION 178.338-6
| 178.338-6 Manholes. | |
| 49:3.1.1.1.1.7.1.32 | SECTION 178.338-7
| 178.338-7 Openings. | |
| 49:3.1.1.1.1.7.1.33 | SECTION 178.338-8
| 178.338-8 Pressure relief devices, piping, valves, and fittings. | |
| 49:3.1.1.1.1.7.1.34 | SECTION 178.338-9
| 178.338-9 Holding time. | |
| 49:3.1.1.1.1.7.1.35 | SECTION 178.338-10
| 178.338-10 Accident damage protection. | |
| 49:3.1.1.1.1.7.1.36 | SECTION 178.338-11
| 178.338-11 Discharge control devices. | |
| 49:3.1.1.1.1.7.1.37 | SECTION 178.338-12
| 178.338-12 Shear section. | |
| 49:3.1.1.1.1.7.1.38 | SECTION 178.338-13
| 178.338-13 Supporting and anchoring. | |
| 49:3.1.1.1.1.7.1.39 | SECTION 178.338-14
| 178.338-14 Gauging devices. | |
| 49:3.1.1.1.1.7.1.40 | SECTION 178.338-15
| 178.338-15 Cleanliness. | |
| 49:3.1.1.1.1.7.1.41 | SECTION 178.338-16
| 178.338-16 Inspection and testing. | |
| 49:3.1.1.1.1.7.1.42 | SECTION 178.338-17
| 178.338-17 Pumps and compressors. | |
| 49:3.1.1.1.1.7.1.43 | SECTION 178.338-18
| 178.338-18 Marking. | |
| 49:3.1.1.1.1.7.1.44 | SECTION 178.338-19
| 178.338-19 Certification. | |
| 49:3.1.1.1.1.7.1.45 | SECTION 178.340-178.343
| 178.340-178.343 [Reserved] | |
| 49:3.1.1.1.1.7.1.46 | SECTION 178.345
| 178.345 General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. | |
| 49:3.1.1.1.1.7.1.47 | SECTION 178.345-1
| 178.345-1 General requirements. | |
| 49:3.1.1.1.1.7.1.48 | SECTION 178.345-2
| 178.345-2 Material and material thickness. | |
| 49:3.1.1.1.1.7.1.49 | SECTION 178.345-3
| 178.345-3 Structural integrity. | |
| 49:3.1.1.1.1.7.1.50 | SECTION 178.345-4
| 178.345-4 Joints. | |
| 49:3.1.1.1.1.7.1.51 | SECTION 178.345-5
| 178.345-5 Manhole assemblies. | |
| 49:3.1.1.1.1.7.1.52 | SECTION 178.345-6
| 178.345-6 Supports and anchoring. | |
| 49:3.1.1.1.1.7.1.53 | SECTION 178.345-7
| 178.345-7 Circumferential reinforcements. | |
| 49:3.1.1.1.1.7.1.54 | SECTION 178.345-8
| 178.345-8 Accident damage protection. | |
| 49:3.1.1.1.1.7.1.55 | SECTION 178.345-9
| 178.345-9 Pumps, piping, hoses and connections. | |
| 49:3.1.1.1.1.7.1.56 | SECTION 178.345-10
| 178.345-10 Pressure relief. | |
| 49:3.1.1.1.1.7.1.57 | SECTION 178.345-11
| 178.345-11 Tank outlets. | |
| 49:3.1.1.1.1.7.1.58 | SECTION 178.345-12
| 178.345-12 Gauging devices. | |
| 49:3.1.1.1.1.7.1.59 | SECTION 178.345-13
| 178.345-13 Pressure and leakage tests. | |
| 49:3.1.1.1.1.7.1.60 | SECTION 178.345-14
| 178.345-14 Marking. | |
| 49:3.1.1.1.1.7.1.61 | SECTION 178.345-15
| 178.345-15 Certification. | |
| 49:3.1.1.1.1.7.1.62 | SECTION 178.346
| 178.346 Specification DOT 406; cargo tank motor vehicle. | |
| 49:3.1.1.1.1.7.1.63 | SECTION 178.346-1
| 178.346-1 General requirements. | |
| 49:3.1.1.1.1.7.1.64 | SECTION 178.346-2
| 178.346-2 Material and thickness of material. | |
| 49:3.1.1.1.1.7.1.65 | SECTION 178.346-3
| 178.346-3 Pressure relief. | |
| 49:3.1.1.1.1.7.1.66 | SECTION 178.346-4
| 178.346-4 Outlets. | |
| 49:3.1.1.1.1.7.1.67 | SECTION 178.346-5
| 178.346-5 Pressure and leakage tests. | |
| 49:3.1.1.1.1.7.1.68 | SECTION 178.347
| 178.347 Specification DOT 407; cargo tank motor vehicle. | |
| 49:3.1.1.1.1.7.1.69 | SECTION 178.347-1
| 178.347-1 General requirements. | |
| 49:3.1.1.1.1.7.1.70 | SECTION 178.347-2
| 178.347-2 Material and thickness of material. | |
| 49:3.1.1.1.1.7.1.71 | SECTION 178.347-3
| 178.347-3 Manhole assemblies. | |
| 49:3.1.1.1.1.7.1.72 | SECTION 178.347-4
| 178.347-4 Pressure relief. | |
| 49:3.1.1.1.1.7.1.73 | SECTION 178.347-5
| 178.347-5 Pressure and leakage test. | |
| 49:3.1.1.1.1.7.1.74 | SECTION 178.348
| 178.348 Specification DOT 412; cargo tank motor vehicle. | |
| 49:3.1.1.1.1.7.1.75 | SECTION 178.348-1
| 178.348-1 General requirements. | |
| 49:3.1.1.1.1.7.1.76 | SECTION 178.348-2
| 178.348-2 Material and thickness of material. | |
| 49:3.1.1.1.1.7.1.77 | SECTION 178.348-3
| 178.348-3 Pumps, piping, hoses and connections. | |
| 49:3.1.1.1.1.7.1.78 | SECTION 178.348-4
| 178.348-4 Pressure relief. | |
| 49:3.1.1.1.1.7.1.79 | SECTION 178.348-5
| 178.348-5 Pressure and leakage test. | |
| 49:3.1.1.1.1.8 | SUBPART K
| Subpart K - Specifications for Packagings for Class 7 (Radioactive) Materials | |
| 49:3.1.1.1.1.8.1.1 | SECTION 178.350
| 178.350 Specification 7A; general packaging, Type A. | |
| 49:3.1.1.1.1.9 | SUBPART L
| Subpart L - Non-bulk Performance-Oriented Packaging Standards | |
| 49:3.1.1.1.1.9.1.1 | SECTION 178.500
| 178.500 Purpose, scope and definitions. | |
| 49:3.1.1.1.1.9.1.2 | SECTION 178.502
| 178.502 Identification codes for packagings. | |
| 49:3.1.1.1.1.9.1.3 | SECTION 178.503
| 178.503 Marking of packagings. | |
| 49:3.1.1.1.1.9.1.4 | SECTION 178.504
| 178.504 Standards for steel drums. | |
| 49:3.1.1.1.1.9.1.5 | SECTION 178.505
| 178.505 Standards for aluminum drums. | |
| 49:3.1.1.1.1.9.1.6 | SECTION 178.506
| 178.506 Standards for metal drums other than steel or aluminum. | |
| 49:3.1.1.1.1.9.1.7 | SECTION 178.507
| 178.507 Standards for plywood drums. | |
| 49:3.1.1.1.1.9.1.8 | SECTION 178.508
| 178.508 Standards for fiber drums. | |
| 49:3.1.1.1.1.9.1.9 | SECTION 178.509
| 178.509 Standards for plastic drums and jerricans. | |
| 49:3.1.1.1.1.9.1.10 | SECTION 178.510
| 178.510 Standards for wooden barrels. | |
| 49:3.1.1.1.1.9.1.11 | SECTION 178.511
| 178.511 Standards for aluminum and steel jerricans. | |
| 49:3.1.1.1.1.9.1.12 | SECTION 178.512
| 178.512 Standards for steel, aluminum or other metal boxes. | |
| 49:3.1.1.1.1.9.1.13 | SECTION 178.513
| 178.513 Standards for boxes of natural wood. | |
| 49:3.1.1.1.1.9.1.14 | SECTION 178.514
| 178.514 Standards for plywood boxes. | |
| 49:3.1.1.1.1.9.1.15 | SECTION 178.515
| 178.515 Standards for reconstituted wood boxes. | |
| 49:3.1.1.1.1.9.1.16 | SECTION 178.516
| 178.516 Standards for fiberboard boxes. | |
| 49:3.1.1.1.1.9.1.17 | SECTION 178.517
| 178.517 Standards for plastic boxes. | |
| 49:3.1.1.1.1.9.1.18 | SECTION 178.518
| 178.518 Standards for woven plastic bags. | |
| 49:3.1.1.1.1.9.1.19 | SECTION 178.519
| 178.519 Standards for plastic film bags. | |
| 49:3.1.1.1.1.9.1.20 | SECTION 178.520
| 178.520 Standards for textile bags. | |
| 49:3.1.1.1.1.9.1.21 | SECTION 178.521
| 178.521 Standards for paper bags. | |
| 49:3.1.1.1.1.9.1.22 | SECTION 178.522
| 178.522 Standards for composite packagings with inner plastic receptacles. | |
| 49:3.1.1.1.1.9.1.23 | SECTION 178.523
| 178.523 Standards for composite packagings with inner glass, porcelain, or stoneware receptacles. | |
| 49:3.1.1.1.1.10 | SUBPART M
| Subpart M - Testing of Non-bulk Packagings and Packages | |
| 49:3.1.1.1.1.10.1.1 | SECTION 178.600
| 178.600 Purpose and scope. | |
| 49:3.1.1.1.1.10.1.2 | SECTION 178.601
| 178.601 General requirements. | |
| 49:3.1.1.1.1.10.1.3 | SECTION 178.602
| 178.602 Preparation of packagings and packages for testing. | |
| 49:3.1.1.1.1.10.1.4 | SECTION 178.603
| 178.603 Drop test. | |
| 49:3.1.1.1.1.10.1.5 | SECTION 178.604
| 178.604 Leakproofness test. | |
| 49:3.1.1.1.1.10.1.6 | SECTION 178.605
| 178.605 Hydrostatic pressure test. | |
| 49:3.1.1.1.1.10.1.7 | SECTION 178.606
| 178.606 Stacking test. | |
| 49:3.1.1.1.1.10.1.8 | SECTION 178.607
| 178.607 Cooperage test for bung-type wooden barrels. | |
| 49:3.1.1.1.1.10.1.9 | SECTION 178.608
| 178.608 Vibration standard. | |
| 49:3.1.1.1.1.10.1.10 | SECTION 178.609
| 178.609 Test requirements for packagings for infectious substances. | |
| 49:3.1.1.1.1.11 | SUBPART N
| Subpart N - IBC Performance-Oriented Standards | |
| 49:3.1.1.1.1.11.1.1 | SECTION 178.700
| 178.700 Purpose, scope and definitions. | |
| 49:3.1.1.1.1.11.1.2 | SECTION 178.702
| 178.702 IBC codes. | |
| 49:3.1.1.1.1.11.1.3 | SECTION 178.703
| 178.703 Marking of IBCs. | |
| 49:3.1.1.1.1.11.1.4 | SECTION 178.704
| 178.704 General IBC standards. | |
| 49:3.1.1.1.1.11.1.5 | SECTION 178.705
| 178.705 Standards for metal IBCs. | |
| 49:3.1.1.1.1.11.1.6 | SECTION 178.706
| 178.706 Standards for rigid plastic IBCs. | |
| 49:3.1.1.1.1.11.1.7 | SECTION 178.707
| 178.707 Standards for composite IBCs. | |
| 49:3.1.1.1.1.11.1.8 | SECTION 178.708
| 178.708 Standards for fiberboard IBCs. | |
| 49:3.1.1.1.1.11.1.9 | SECTION 178.709
| 178.709 Standards for wooden IBCs. | |
| 49:3.1.1.1.1.11.1.10 | SECTION 178.710
| 178.710 Standards for flexible IBCs. | |
| 49:3.1.1.1.1.12 | SUBPART O
| Subpart O - Testing of IBCs | |
| 49:3.1.1.1.1.12.1.1 | SECTION 178.800
| 178.800 Purpose and scope. | |
| 49:3.1.1.1.1.12.1.2 | SECTION 178.801
| 178.801 General requirements. | |
| 49:3.1.1.1.1.12.1.3 | SECTION 178.802
| 178.802 Preparation of fiberboard IBCs for testing. | |
| 49:3.1.1.1.1.12.1.4 | SECTION 178.803
| 178.803 Testing and certification of IBCs. | |
| 49:3.1.1.1.1.12.1.5 | SECTION 178.810
| 178.810 Drop test. | |
| 49:3.1.1.1.1.12.1.6 | SECTION 178.811
| 178.811 Bottom lift test. | |
| 49:3.1.1.1.1.12.1.7 | SECTION 178.812
| 178.812 Top lift test. | |
| 49:3.1.1.1.1.12.1.8 | SECTION 178.813
| 178.813 Leakproofness test. | |
| 49:3.1.1.1.1.12.1.9 | SECTION 178.814
| 178.814 Hydrostatic pressure test. | |
| 49:3.1.1.1.1.12.1.10 | SECTION 178.815
| 178.815 Stacking test. | |
| 49:3.1.1.1.1.12.1.11 | SECTION 178.816
| 178.816 Topple test. | |
| 49:3.1.1.1.1.12.1.12 | SECTION 178.817
| 178.817 Righting test. | |
| 49:3.1.1.1.1.12.1.13 | SECTION 178.818
| 178.818 Tear test. | |
| 49:3.1.1.1.1.12.1.14 | SECTION 178.819
| 178.819 Vibration test. | |
| 49:3.1.1.1.1.13 | SUBPART P
| Subpart P - Large Packagings Standards | |
| 49:3.1.1.1.1.13.1.1 | SECTION 178.900
| 178.900 Purpose and scope. | |
| 49:3.1.1.1.1.13.1.2 | SECTION 178.905
| 178.905 Large Packaging identification codes. | |
| 49:3.1.1.1.1.13.1.3 | SECTION 178.910
| 178.910 Marking of Large Packagings. | |
| 49:3.1.1.1.1.13.1.4 | SECTION 178.915
| 178.915 General Large Packaging standards. | |
| 49:3.1.1.1.1.13.1.5 | SECTION 178.920
| 178.920 Standards for metal Large Packagings. | |
| 49:3.1.1.1.1.13.1.6 | SECTION 178.925
| 178.925 Standards for rigid plastic Large Packagings. | |
| 49:3.1.1.1.1.13.1.7 | SECTION 178.930
| 178.930 Standards for fiberboard Large Packagings. | |
| 49:3.1.1.1.1.13.1.8 | SECTION 178.935
| 178.935 Standards for wooden Large Packagings. | |
| 49:3.1.1.1.1.13.1.9 | SECTION 178.940
| 178.940 Standards for flexible Large Packagings. | |
| 49:3.1.1.1.1.14 | SUBPART Q
| Subpart Q - Testing of Large Packagings | |
| 49:3.1.1.1.1.14.1.1 | SECTION 178.950
| 178.950 Purpose and scope. | |
| 49:3.1.1.1.1.14.1.2 | SECTION 178.955
| 178.955 General requirements. | |
| 49:3.1.1.1.1.14.1.3 | SECTION 178.960
| 178.960 Preparation of Large Packagings for testing. | |
| 49:3.1.1.1.1.14.1.4 | SECTION 178.965
| 178.965 Drop test. | |
| 49:3.1.1.1.1.14.1.5 | SECTION 178.970
| 178.970 Bottom lift test. | |
| 49:3.1.1.1.1.14.1.6 | SECTION 178.975
| 178.975 Top lift test. | |
| 49:3.1.1.1.1.14.1.7 | SECTION 178.980
| 178.980 Stacking test. | |
| 49:3.1.1.1.1.14.1.8 | SECTION 178.985
| 178.985 Vibration test. | |
| 49:3.1.1.1.1.15 | SUBPART R
| Subpart R - Flexible Bulk Container Standards | |
| 49:3.1.1.1.1.15.1.1 | SECTION 178.1000
| 178.1000 Purpose and scope. | |
| 49:3.1.1.1.1.15.1.2 | SECTION 178.1005
| 178.1005 Flexible Bulk Container identification code. | |
| 49:3.1.1.1.1.15.1.3 | SECTION 178.1010
| 178.1010 Marking of Flexible Bulk Containers. | |
| 49:3.1.1.1.1.15.1.4 | SECTION 178.1015
| 178.1015 General Flexible Bulk Container standards. | |
| 49:3.1.1.1.1.15.1.5 | SECTION 178.1020
| 178.1020 Period of use for transportation of hazardous materials in Flexible Bulk Containers. | |
| 49:3.1.1.1.1.16 | SUBPART S
| Subpart S - Testing of Flexible Bulk Containers | |
| 49:3.1.1.1.1.16.1.1 | SECTION 178.1030
| 178.1030 Purpose and scope. | |
| 49:3.1.1.1.1.16.1.2 | SECTION 178.1035
| 178.1035 General requirements. | |
| 49:3.1.1.1.1.16.1.3 | SECTION 178.1040
| 178.1040 Preparation of Flexible Bulk Containers for testing. | |
| 49:3.1.1.1.1.16.1.4 | SECTION 178.1045
| 178.1045 Drop test. | |
| 49:3.1.1.1.1.16.1.5 | SECTION 178.1050
| 178.1050 Top lift test. | |
| 49:3.1.1.1.1.16.1.6 | SECTION 178.1055
| 178.1055 Stacking test. | |
| 49:3.1.1.1.1.16.1.7 | SECTION 178.1060
| 178.1060 Topple test. | |
| 49:3.1.1.1.1.16.1.8 | SECTION 178.1065
| 178.1065 Righting test. | |
| 49:3.1.1.1.1.16.1.9 | SECTION 178.1070
| 178.1070 Tear test. | |
| 49:3.1.1.1.1.17 | SUBPART 0
| | |
| 49:3.1.1.1.1.18.1.1.2 | APPENDIX Appendix A
| Appendix A to Part 178 - Specifications for Steel | |
| 49:3.1.1.1.1.18.1.1.3 | APPENDIX Appendix B
| Appendix B to Part 178 - Alternative Leakproofness Test Methods | |
| 49:3.1.1.1.1.18.1.1.4 | APPENDIX Appendix C
| Appendix C to Part 178 - Nominal and Minimum Thicknesses of Steel Drums and Jerricans | |
| 49:3.1.1.1.1.18.1.1.5 | APPENDIX Appendix D
| Appendix D to Part 178 - Thermal Resistance Test | |
| 49:3.1.1.1.1.18.1.1.6 | APPENDIX Appendix E
| Appendix E to Part 178 - Flame Penetration Resistance Test | |