| 49:3.1.1.1.1.7.1.1 | SECTION 178.318
  |    178.318 Specification MC 201; container for detonators and percussion caps. |  | 
| 49:3.1.1.1.1.7.1.2 | SECTION 178.318-1
  |    178.318-1 Scope. |  | 
| 49:3.1.1.1.1.7.1.3 | SECTION 178.318-2
  |    178.318-2 Container. |  | 
| 49:3.1.1.1.1.7.1.4 | SECTION 178.318-3
  |    178.318-3 Marking. |  | 
| 49:3.1.1.1.1.7.1.5 | SECTION 178.320
  |    178.320 General requirements applicable to all DOT specification cargo tank motor vehicles. |  | 
| 49:3.1.1.1.1.7.1.6 | SECTION 178.337
  |    178.337 Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter. |  | 
| 49:3.1.1.1.1.7.1.7 | SECTION 178.337-1
  |    178.337-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.8 | SECTION 178.337-2
  |    178.337-2 Material. |  | 
| 49:3.1.1.1.1.7.1.9 | SECTION 178.337-3
  |    178.337-3 Structural integrity. |  | 
| 49:3.1.1.1.1.7.1.10 | SECTION 178.337-4
  |    178.337-4 Joints. |  | 
| 49:3.1.1.1.1.7.1.11 | SECTION 178.337-5
  |    178.337-5 Bulkheads, baffles and ring stiffeners. |  | 
| 49:3.1.1.1.1.7.1.12 | SECTION 178.337-6
  |    178.337-6 Closure for manhole. |  | 
| 49:3.1.1.1.1.7.1.13 | SECTION 178.337-7
  |    178.337-7 Overturn protection. |  | 
| 49:3.1.1.1.1.7.1.14 | SECTION 178.337-8
  |    178.337-8 Openings, inlets, and outlets. |  | 
| 49:3.1.1.1.1.7.1.15 | SECTION 178.337-9
  |    178.337-9 Pressure relief devices, piping, valves, hoses, and fittings. |  | 
| 49:3.1.1.1.1.7.1.16 | SECTION 178.337-10
  |    178.337-10 Accident damage protection. |  | 
| 49:3.1.1.1.1.7.1.17 | SECTION 178.337-11
  |    178.337-11 Emergency discharge control. |  | 
| 49:3.1.1.1.1.7.1.18 | SECTION 178.337-12
  |    178.337-12 [Reserved] |  | 
| 49:3.1.1.1.1.7.1.19 | SECTION 178.337-13
  |    178.337-13 Supporting and anchoring. |  | 
| 49:3.1.1.1.1.7.1.20 | SECTION 178.337-14
  |    178.337-14 Gauging devices. |  | 
| 49:3.1.1.1.1.7.1.21 | SECTION 178.337-15
  |    178.337-15 Pumps and compressors. |  | 
| 49:3.1.1.1.1.7.1.22 | SECTION 178.337-16
  |    178.337-16 Testing. |  | 
| 49:3.1.1.1.1.7.1.23 | SECTION 178.337-17
  |    178.337-17 Marking. |  | 
| 49:3.1.1.1.1.7.1.24 | SECTION 178.337-18
  |    178.337-18 Certification. |  | 
| 49:3.1.1.1.1.7.1.25 | SECTION 178.338
  |    178.338 Specification MC-338; insulated cargo tank motor vehicle. |  | 
| 49:3.1.1.1.1.7.1.26 | SECTION 178.338-1
  |    178.338-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.27 | SECTION 178.338-2
  |    178.338-2 Material. |  | 
| 49:3.1.1.1.1.7.1.28 | SECTION 178.338-3
  |    178.338-3 Structural integrity. |  | 
| 49:3.1.1.1.1.7.1.29 | SECTION 178.338-4
  |    178.338-4 Joints. |  | 
| 49:3.1.1.1.1.7.1.30 | SECTION 178.338-5
  |    178.338-5 Stiffening rings. |  | 
| 49:3.1.1.1.1.7.1.31 | SECTION 178.338-6
  |    178.338-6 Manholes. |  | 
| 49:3.1.1.1.1.7.1.32 | SECTION 178.338-7
  |    178.338-7 Openings. |  | 
| 49:3.1.1.1.1.7.1.33 | SECTION 178.338-8
  |    178.338-8 Pressure relief devices, piping, valves, and fittings. |  | 
| 49:3.1.1.1.1.7.1.34 | SECTION 178.338-9
  |    178.338-9 Holding time. |  | 
| 49:3.1.1.1.1.7.1.35 | SECTION 178.338-10
  |    178.338-10 Accident damage protection. |  | 
| 49:3.1.1.1.1.7.1.36 | SECTION 178.338-11
  |    178.338-11 Discharge control devices. |  | 
| 49:3.1.1.1.1.7.1.37 | SECTION 178.338-12
  |    178.338-12 Shear section. |  | 
| 49:3.1.1.1.1.7.1.38 | SECTION 178.338-13
  |    178.338-13 Supporting and anchoring. |  | 
| 49:3.1.1.1.1.7.1.39 | SECTION 178.338-14
  |    178.338-14 Gauging devices. |  | 
| 49:3.1.1.1.1.7.1.40 | SECTION 178.338-15
  |    178.338-15 Cleanliness. |  | 
| 49:3.1.1.1.1.7.1.41 | SECTION 178.338-16
  |    178.338-16 Inspection and testing. |  | 
| 49:3.1.1.1.1.7.1.42 | SECTION 178.338-17
  |    178.338-17 Pumps and compressors. |  | 
| 49:3.1.1.1.1.7.1.43 | SECTION 178.338-18
  |    178.338-18 Marking. |  | 
| 49:3.1.1.1.1.7.1.44 | SECTION 178.338-19
  |    178.338-19 Certification. |  | 
| 49:3.1.1.1.1.7.1.45 | SECTION 178.340-178.343
  |    178.340-178.343 [Reserved] |  | 
| 49:3.1.1.1.1.7.1.46 | SECTION 178.345
  |    178.345 General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles. |  | 
| 49:3.1.1.1.1.7.1.47 | SECTION 178.345-1
  |    178.345-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.48 | SECTION 178.345-2
  |    178.345-2 Material and material thickness. |  | 
| 49:3.1.1.1.1.7.1.49 | SECTION 178.345-3
  |    178.345-3 Structural integrity. |  | 
| 49:3.1.1.1.1.7.1.50 | SECTION 178.345-4
  |    178.345-4 Joints. |  | 
| 49:3.1.1.1.1.7.1.51 | SECTION 178.345-5
  |    178.345-5 Manhole assemblies. |  | 
| 49:3.1.1.1.1.7.1.52 | SECTION 178.345-6
  |    178.345-6 Supports and anchoring. |  | 
| 49:3.1.1.1.1.7.1.53 | SECTION 178.345-7
  |    178.345-7 Circumferential reinforcements. |  | 
| 49:3.1.1.1.1.7.1.54 | SECTION 178.345-8
  |    178.345-8 Accident damage protection. |  | 
| 49:3.1.1.1.1.7.1.55 | SECTION 178.345-9
  |    178.345-9 Pumps, piping, hoses and connections. |  | 
| 49:3.1.1.1.1.7.1.56 | SECTION 178.345-10
  |    178.345-10 Pressure relief. |  | 
| 49:3.1.1.1.1.7.1.57 | SECTION 178.345-11
  |    178.345-11 Tank outlets. |  | 
| 49:3.1.1.1.1.7.1.58 | SECTION 178.345-12
  |    178.345-12 Gauging devices. |  | 
| 49:3.1.1.1.1.7.1.59 | SECTION 178.345-13
  |    178.345-13 Pressure and leakage tests. |  | 
| 49:3.1.1.1.1.7.1.60 | SECTION 178.345-14
  |    178.345-14 Marking. |  | 
| 49:3.1.1.1.1.7.1.61 | SECTION 178.345-15
  |    178.345-15 Certification. |  | 
| 49:3.1.1.1.1.7.1.62 | SECTION 178.346
  |    178.346 Specification DOT 406; cargo tank motor vehicle. |  | 
| 49:3.1.1.1.1.7.1.63 | SECTION 178.346-1
  |    178.346-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.64 | SECTION 178.346-2
  |    178.346-2 Material and thickness of material. |  | 
| 49:3.1.1.1.1.7.1.65 | SECTION 178.346-3
  |    178.346-3 Pressure relief. |  | 
| 49:3.1.1.1.1.7.1.66 | SECTION 178.346-4
  |    178.346-4 Outlets. |  | 
| 49:3.1.1.1.1.7.1.67 | SECTION 178.346-5
  |    178.346-5 Pressure and leakage tests. |  | 
| 49:3.1.1.1.1.7.1.68 | SECTION 178.347
  |    178.347 Specification DOT 407; cargo tank motor vehicle. |  | 
| 49:3.1.1.1.1.7.1.69 | SECTION 178.347-1
  |    178.347-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.70 | SECTION 178.347-2
  |    178.347-2 Material and thickness of material. |  | 
| 49:3.1.1.1.1.7.1.71 | SECTION 178.347-3
  |    178.347-3 Manhole assemblies. |  | 
| 49:3.1.1.1.1.7.1.72 | SECTION 178.347-4
  |    178.347-4 Pressure relief. |  | 
| 49:3.1.1.1.1.7.1.73 | SECTION 178.347-5
  |    178.347-5 Pressure and leakage test. |  | 
| 49:3.1.1.1.1.7.1.74 | SECTION 178.348
  |    178.348 Specification DOT 412; cargo tank motor vehicle. |  | 
| 49:3.1.1.1.1.7.1.75 | SECTION 178.348-1
  |    178.348-1 General requirements. |  | 
| 49:3.1.1.1.1.7.1.76 | SECTION 178.348-2
  |    178.348-2 Material and thickness of material. |  | 
| 49:3.1.1.1.1.7.1.77 | SECTION 178.348-3
  |    178.348-3 Pumps, piping, hoses and connections. |  | 
| 49:3.1.1.1.1.7.1.78 | SECTION 178.348-4
  |    178.348-4 Pressure relief. |  | 
| 49:3.1.1.1.1.7.1.79 | SECTION 178.348-5
  |    178.348-5 Pressure and leakage test. |  |