Title 46

Volume 6 CHAPTER I SUBCHAP Q

Subchapter Q - Equipment, Construction, And Materials: Specifications And Approval

46:6.0.1.1.1PART 156-158
PARTS 156-158 [RESERVED]
46:6.0.1.1.2PART 159
PART 159 - APPROVAL OF EQUIPMENT AND MATERIALS
46:6.0.1.1.2.1SUBPART 159.001
Subpart 159.001 - General
46:6.0.1.1.2.1.1.1SECTION 159.001-1
     159.001-1 Purpose.
46:6.0.1.1.2.1.1.2SECTION 159.001-2
     159.001-2 Right of appeal.
46:6.0.1.1.2.1.1.3SECTION 159.001-3
     159.001-3 Definitions.
46:6.0.1.1.2.1.1.4SECTION 159.001-4
     159.001-4 Incorporation by reference.
46:6.0.1.1.2.1.1.5SECTION 159.001-5
     159.001-5 Correspondence and applications.
46:6.0.1.1.2.1.1.6SECTION 159.001-7
     159.001-7 Substituted procedures.
46:6.0.1.1.2.1.1.7SECTION 159.001-9
     159.001-9 OMB Control Numbers assigned pursuant to the Paperwork Reduction Act.
46:6.0.1.1.2.2SUBPART 159.003
Subpart 159.003 - Approvals Under Mutual Recognition Agreements (MRA)
46:6.0.1.1.2.2.1.1SECTION 159.003-1
     159.003-1 Purpose.
46:6.0.1.1.2.2.1.2SECTION 159.003-3
     159.003-3 Acceptance of foreign approvals under a Mutual Recognition Agreement (MRA).
46:6.0.1.1.2.2.1.3SECTION 159.003-5
     159.003-5 Approval by the Coast Guard under a Mutual Recognition Agreement (MRA).
46:6.0.1.1.2.2.1.4SECTION 159.003-7
     159.003-7 Multiple approval numbers.
46:6.0.1.1.2.2.1.5SECTION 159.003-9
     159.003-9 Products covered by Mutual Recognition Agreements (MRAs).
46:6.0.1.1.2.3SUBPART 159.005
Subpart 159.005 - Approval Procedures
46:6.0.1.1.2.3.1.1SECTION 159.005-1
     159.005-1 Purpose.
46:6.0.1.1.2.3.1.2SECTION 159.005-3
     159.005-3 Application for preapproval review.
46:6.0.1.1.2.3.1.3SECTION 159.005-5
     159.005-5 Preapproval review: Contents of application.
46:6.0.1.1.2.3.1.4SECTION 159.005-7
     159.005-7 Preapproval review: Coast Guard action.
46:6.0.1.1.2.3.1.5SECTION 159.005-9
     159.005-9 Approval inspections and tests.
46:6.0.1.1.2.3.1.6SECTION 159.005-11
     159.005-11 Approval inspection or test report: Contents.
46:6.0.1.1.2.3.1.7SECTION 159.005-12
     159.005-12 Plans.
46:6.0.1.1.2.3.1.8SECTION 159.005-13
     159.005-13 Equipment or material: Approval.
46:6.0.1.1.2.3.1.9SECTION 159.005-15
     159.005-15 Approval of equipment or material: Suspensions, withdrawals, and terminations.
46:6.0.1.1.2.4SUBPART 159.007
Subpart 159.007 - Production Inspection and Tests of Approved Equipment and Materials
46:6.0.1.1.2.4.1.1SECTION 159.007-1
     159.007-1 Purpose.
46:6.0.1.1.2.4.1.2SECTION 159.007-3
     159.007-3 Production inspections and tests: Independent laboratory's procedures.
46:6.0.1.1.2.4.1.3SECTION 159.007-5
     159.007-5 Production inspections and tests: Application for acceptance.
46:6.0.1.1.2.4.1.4SECTION 159.007-7
     159.007-7 Application for acceptance for production inspections and tests: Coast Guard action.
46:6.0.1.1.2.4.1.5SECTION 159.007-9
     159.007-9 Production inspections and tests.
46:6.0.1.1.2.4.1.6SECTION 159.007-11
     159.007-11 Production inspections and tests: Yearly report.
46:6.0.1.1.2.4.1.7SECTION 159.007-13
     159.007-13 Production inspections and tests: Records.
46:6.0.1.1.2.5SUBPART 159.010
Subpart 159.010 - Independent Laboratory: Acceptance, Recognition, and Termination
46:6.0.1.1.2.5.1.1SECTION 159.010-1
     159.010-1 Purpose.
46:6.0.1.1.2.5.1.2SECTION 159.010-3
     159.010-3 Independent laboratory: Standards for acceptance.
46:6.0.1.1.2.5.1.3SECTION 159.010-5
     159.010-5 Independent laboratory: Application for acceptance.
46:6.0.1.1.2.5.1.4SECTION 159.010-7
     159.010-7 Recognized independent laboratory: Memorandum of Understanding.
46:6.0.1.1.2.5.1.5SECTION 159.010-11
     159.010-11 Changes in the laboratory's qualifications.
46:6.0.1.1.2.5.1.6SECTION 159.010-15
     159.010-15 Contracting inspections and tests or transferrals to another laboratory or person.
46:6.0.1.1.2.5.1.7SECTION 159.010-17
     159.010-17 Termination of acceptance or recognition of an independent laboratory.
46:6.0.1.1.2.5.1.8SECTION 159.010-19
     159.010-19 Termination of acceptance or recognition: Procedure.
46:6.0.1.1.3PART 160
PART 160 - LIFESAVING EQUIPMENT
46:6.0.1.1.3.1SUBPART 160.001
Subpart 160.001 - Life Preservers, General
46:6.0.1.1.3.1.1.1SECTION 160.001-1
     160.001-1 Scope.
46:6.0.1.1.3.1.1.2SECTION 160.001-2
     160.001-2 General characteristics of life preservers.
46:6.0.1.1.3.1.1.3SECTION 160.001-3
     160.001-3 Procedure for approval.
46:6.0.1.1.3.1.1.4SECTION 160.001-5
     160.001-5 Production oversight.
46:6.0.1.1.3.2SUBPART 160.002
Subpart 160.002 - Life Preservers, Kapok, Adult and Child (Jacket Type), Models 3 and 5
46:6.0.1.1.3.2.1.1SECTION 160.002-1
     160.002-1 Incorporation by reference.
46:6.0.1.1.3.2.1.2SECTION 160.002-2
     160.002-2 Size and models.
46:6.0.1.1.3.2.1.3SECTION 160.002-3
     160.002-3 Materials.
46:6.0.1.1.3.2.1.4SECTION 160.002-4
     160.002-4 Construction.
46:6.0.1.1.3.2.1.5SECTION 160.002-5
     160.002-5 Sampling, tests, and inspections.
46:6.0.1.1.3.2.1.6SECTION 160.002-6
     160.002-6 Marking.
46:6.0.1.1.3.2.1.7SECTION 160.002-7
     160.002-7 Procedure for approval.
46:6.0.1.1.3.3SUBPART 160.005
Subpart 160.005 - Life Preservers, Fibrous Glass, Adult and Child (Jacket Type), Models 52 and 56
46:6.0.1.1.3.3.1.1SECTION 160.005-1
     160.005-1 Incorporation by reference.
46:6.0.1.1.3.3.1.2SECTION 160.005-2
     160.005-2 Size and model.
46:6.0.1.1.3.3.1.3SECTION 160.005-3
     160.005-3 Materials.
46:6.0.1.1.3.3.1.4SECTION 160.005-4
     160.005-4 Construction.
46:6.0.1.1.3.3.1.5SECTION 160.005-5
     160.005-5 Sampling, tests, and inspections.
46:6.0.1.1.3.3.1.6SECTION 160.005-6
     160.005-6 Marking.
46:6.0.1.1.3.3.1.7SECTION 160.005-7
     160.005-7 Procedure for approval.
46:6.0.1.1.3.4SUBPART 160.006
Subpart 160.006 - Life Preservers: Repairing
46:6.0.1.1.3.4.1.1SECTION 160.006-2
     160.006-2 Repairing.
46:6.0.1.1.3.5SUBPART 160.010
Subpart 160.010 - Buoyant Apparatus for Merchant Vessels
46:6.0.1.1.3.5.1.1SECTION 160.010-1
     160.010-1 Incorporation by reference.
46:6.0.1.1.3.5.1.2SECTION 160.010-2
     160.010-2 Definitions.
46:6.0.1.1.3.5.1.3SECTION 160.010-3
     160.010-3 Inflatable buoyant apparatus.
46:6.0.1.1.3.5.1.4SECTION 160.010-4
     160.010-4 General requirements for buoyant apparatus.
46:6.0.1.1.3.5.1.5SECTION 160.010-5
     160.010-5 Buoyant apparatus with plastic foam buoyancy.
46:6.0.1.1.3.5.1.6SECTION 160.010-6
     160.010-6 Capacity of buoyant apparatus.
46:6.0.1.1.3.5.1.7SECTION 160.010-7
     160.010-7 Methods of sampling, inspections and tests.
46:6.0.1.1.3.5.1.8SECTION 160.010-8
     160.010-8 Nameplate and marking.
46:6.0.1.1.3.5.1.9SECTION 160.010-9
     160.010-9 Procedure for approval.
46:6.0.1.1.3.5.1.10SECTION 160.010-10
     160.010-10 Independent laboratory.
46:6.0.1.1.3.6SUBPART 160.011
Subparts 160.011-160.012 [Reserved]
46:6.0.1.1.3.7SUBPART 160.013
Subpart 160.013 - Hatchets (Lifeboat and Liferaft) for Merchant Vessels
46:6.0.1.1.3.7.1.1SECTION 160.013-1
     160.013-1 Applicable specification and plan.
46:6.0.1.1.3.7.1.2SECTION 160.013-2
     160.013-2 Type and size.
46:6.0.1.1.3.7.1.3SECTION 160.013-3
     160.013-3 Materials, workmanship, and construction details.
46:6.0.1.1.3.7.1.4SECTION 160.013-5
     160.013-5 Marking.
46:6.0.1.1.3.8SUBPART 160.015
Subpart 160.015 [Reserved]
46:6.0.1.1.3.9SUBPART 160.016
Subpart 160.016 - Lamps, Safety, Flame, for Merchant Vessels
46:6.0.1.1.3.9.1.1SECTION 160.016-1
     160.016-1 Applicable specification.
46:6.0.1.1.3.9.1.2SECTION 160.016-2
     160.016-2 Requirements.
46:6.0.1.1.3.9.1.3SECTION 160.016-4
     160.016-4 Marking.
46:6.0.1.1.3.9.1.4SECTION 160.016-5
     160.016-5 Procedure for approval.
46:6.0.1.1.3.10SUBPART 160.017
Subpart 160.017 - Chain Ladder
46:6.0.1.1.3.10.1.1SECTION 160.017-1
     160.017-1 Scope.
46:6.0.1.1.3.10.1.2SECTION 160.017-7
     160.017-7 Independent laboratory.
46:6.0.1.1.3.10.1.3SECTION 160.017-9
     160.017-9 Approval procedure.
46:6.0.1.1.3.10.1.4SECTION 160.017-11
     160.017-11 Materials.
46:6.0.1.1.3.10.1.5SECTION 160.017-13
     160.017-13 Construction.
46:6.0.1.1.3.10.1.6SECTION 160.017-15
     160.017-15 Performance.
46:6.0.1.1.3.10.1.7SECTION 160.017-17
     160.017-17 Strength.
46:6.0.1.1.3.10.1.8SECTION 160.017-21
     160.017-21 Approval tests.
46:6.0.1.1.3.10.1.9SECTION 160.017-25
     160.017-25 Marking.
46:6.0.1.1.3.10.1.10SECTION 160.017-27
     160.017-27 Production tests and examination.
46:6.0.1.1.3.11SUBPART 160.021
Subpart 160.021 - Hand Red Flare Distress Signals
46:6.0.1.1.3.11.1.1SECTION 160.021-1
     160.021-1 Incorporation by reference.
46:6.0.1.1.3.11.1.2SECTION 160.021-2
     160.021-2 Type.
46:6.0.1.1.3.11.1.3SECTION 160.021-3
     160.021-3 Materials, workmanship, construction and performance requirements.
46:6.0.1.1.3.11.1.4SECTION 160.021-4
     160.021-4 Approval and production tests.
46:6.0.1.1.3.11.1.5SECTION 160.021-5
     160.021-5 Labeling and marking.
46:6.0.1.1.3.11.1.6SECTION 160.021-6
     160.021-6 Container.
46:6.0.1.1.3.11.1.7SECTION 160.021-7
     160.021-7 Procedure for approval.
46:6.0.1.1.3.12SUBPART 160.022
Subpart 160.022 - Floating Orange Smoke Distress Signals (5 Minutes)
46:6.0.1.1.3.12.1.1SECTION 160.022-1
     160.022-1 Incorporation by reference.
46:6.0.1.1.3.12.1.2SECTION 160.022-2
     160.022-2 Type.
46:6.0.1.1.3.12.1.3SECTION 160.022-3
     160.022-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.12.1.4SECTION 160.022-4
     160.022-4 Approval and production tests.
46:6.0.1.1.3.12.1.5SECTION 160.022-5
     160.022-5 Marking.
46:6.0.1.1.3.12.1.6SECTION 160.022-7
     160.022-7 Procedure for approval.
46:6.0.1.1.3.13SUBPART 160.023
Subpart 160.023 - Hand Combination Flare and Smoke Distress Signals
46:6.0.1.1.3.13.1.1SECTION 160.023-1
     160.023-1 Incorporation by reference.
46:6.0.1.1.3.13.1.2SECTION 160.023-2
     160.023-2 Type.
46:6.0.1.1.3.13.1.3SECTION 160.023-3
     160.023-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.13.1.4SECTION 160.023-4
     160.023-4 Approval and production tests.
46:6.0.1.1.3.13.1.5SECTION 160.023-5
     160.023-5 Labeling and marking.
46:6.0.1.1.3.13.1.6SECTION 160.023-6
     160.023-6 Container.
46:6.0.1.1.3.13.1.7SECTION 160.023-7
     160.023-7 Procedure for approval.
46:6.0.1.1.3.14SUBPART 160.024
Subpart 160.024 - Pistol-Projected Parachute Red Flare Distress Signals
46:6.0.1.1.3.14.1.1SECTION 160.024-1
     160.024-1 Incorporation by reference.
46:6.0.1.1.3.14.1.2SECTION 160.024-2
     160.024-2 Type.
46:6.0.1.1.3.14.1.3SECTION 160.024-3
     160.024-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.14.1.4SECTION 160.024-4
     160.024-4 Approval and production tests.
46:6.0.1.1.3.14.1.5SECTION 160.024-5
     160.024-5 Marking.
46:6.0.1.1.3.14.1.6SECTION 160.024-7
     160.024-7 Procedure for approval.
46:6.0.1.1.3.15SUBPART 160.026
Subpart 160.026 - Water, Emergency Drinking (In Hermetically Sealed Containers), for Merchant Vessels
46:6.0.1.1.3.15.1.1SECTION 160.026-1
     160.026-1 Applicable specifications and standard.
46:6.0.1.1.3.15.1.2SECTION 160.026-2
     160.026-2 Type.
46:6.0.1.1.3.15.1.3SECTION 160.026-3
     160.026-3 Container.
46:6.0.1.1.3.15.1.4SECTION 160.026-4
     160.026-4 Water.
46:6.0.1.1.3.15.1.5SECTION 160.026-5
     160.026-5 Marking.
46:6.0.1.1.3.15.1.6SECTION 160.026-6
     160.026-6 Sampling, inspection, and tests of production lots.
46:6.0.1.1.3.15.1.7SECTION 160.026-7
     160.026-7 Procedure for approval.
46:6.0.1.1.3.16SUBPART 160.027
Subpart 160.027 - Life Floats for Merchant Vessels
46:6.0.1.1.3.16.1.1SECTION 160.027-2
     160.027-2 Type.
46:6.0.1.1.3.16.1.2SECTION 160.027-3
     160.027-3 Additional requirements for life floats.
46:6.0.1.1.3.16.1.3SECTION 160.027-7
     160.027-7 Pre-approval tests for alternate platform designs.
46:6.0.1.1.3.17SUBPART 160.028
Subpart 160.028 - Signal Pistols for Red Flare Distress Signals
46:6.0.1.1.3.17.1.1SECTION 160.028-2
     160.028-2 Type.
46:6.0.1.1.3.17.1.2SECTION 160.028-3
     160.028-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.17.1.3SECTION 160.028-4
     160.028-4 Approval and production tests.
46:6.0.1.1.3.17.1.4SECTION 160.028-5
     160.028-5 Marking.
46:6.0.1.1.3.17.1.5SECTION 160.028-6
     160.028-6 Container.
46:6.0.1.1.3.17.1.6SECTION 160.028-7
     160.028-7 Procedure for approval.
46:6.0.1.1.3.18SUBPART 160.031
Subpart 160.031 - Line-Throwing Appliance, Shoulder Gun Type (and Equipment)
46:6.0.1.1.3.18.1.1SECTION 160.031-1
     160.031-1 Incorporation by reference.
46:6.0.1.1.3.18.1.2SECTION 160.031-2
     160.031-2 Type and size.
46:6.0.1.1.3.18.1.3SECTION 160.031-3
     160.031-3 Materials, construction, workmanship, and performance requirements.
46:6.0.1.1.3.18.1.4SECTION 160.031-4
     160.031-4 Equipment for shoulder gun type line-throwing appliance.
46:6.0.1.1.3.18.1.5SECTION 160.031-5
     160.031-5 Approval and production tests.
46:6.0.1.1.3.18.1.6SECTION 160.031-6
     160.031-6 Marking.
46:6.0.1.1.3.18.1.7SECTION 160.031-7
     160.031-7 Procedure for approval.
46:6.0.1.1.3.19SUBPART 160.032
Subpart 160.032-035 [Reserved]
46:6.0.1.1.3.20SUBPART 160.036
Subpart 160.036 - Hand-Held Rocket-Propelled Parachute Red Flare Distress Signals
46:6.0.1.1.3.20.1.1SECTION 160.036-1
     160.036-1 Incorporation by reference.
46:6.0.1.1.3.20.1.2SECTION 160.036-2
     160.036-2 Type.
46:6.0.1.1.3.20.1.3SECTION 160.036-3
     160.036-3 Materials, workmanship, construction and performance requirements.
46:6.0.1.1.3.20.1.4SECTION 160.036-4
     160.036-4 Approval and production tests.
46:6.0.1.1.3.20.1.5SECTION 160.036-5
     160.036-5 Marking.
46:6.0.1.1.3.20.1.6SECTION 160.036-6
     160.036-6 Container.
46:6.0.1.1.3.20.1.7SECTION 160.036-7
     160.036-7 Procedure for approval.
46:6.0.1.1.3.21SUBPART 160.037
Subpart 160.037 - Hand Orange Smoke Distress Signals
46:6.0.1.1.3.21.1.1SECTION 160.037-1
     160.037-1 Incorporation by reference.
46:6.0.1.1.3.21.1.2SECTION 160.037-2
     160.037-2 Type.
46:6.0.1.1.3.21.1.3SECTION 160.037-3
     160.037-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.21.1.4SECTION 160.037-4
     160.037-4 Approval and production tests.
46:6.0.1.1.3.21.1.5SECTION 160.037-5
     160.037-5 Labeling and marking.
46:6.0.1.1.3.21.1.6SECTION 160.037-6
     160.037-6 Container.
46:6.0.1.1.3.21.1.7SECTION 160.037-7
     160.037-7 Procedure for approval.
46:6.0.1.1.3.22SUBPART 160.038
Subpart 160.038 - Magazine Chests, Portable, for Merchant Vessels
46:6.0.1.1.3.22.1.1SECTION 160.038-1
     160.038-1 Applicable specifications.
46:6.0.1.1.3.22.1.2SECTION 160.038-2
     160.038-2 Type.
46:6.0.1.1.3.22.1.3SECTION 160.038-3
     160.038-3 Materials, workmanship, and construction.
46:6.0.1.1.3.22.1.4SECTION 160.038-4
     160.038-4 Inspections and tests.
46:6.0.1.1.3.22.1.5SECTION 160.038-5
     160.038-5 Marking.
46:6.0.1.1.3.22.1.6SECTION 160.038-6
     160.038-6 Procedure for approval.
46:6.0.1.1.3.23SUBPART 160.039
Subpart 160.039 [Reserved]
46:6.0.1.1.3.24SUBPART 160.040
Subpart 160.040 - Line-Throwing Appliance, Impulse-Projected Rocket Type (and Equipment)
46:6.0.1.1.3.24.1.1SECTION 160.040-1
     160.040-1 Incorporation by reference.
46:6.0.1.1.3.24.1.2SECTION 160.040-2
     160.040-2 Type and size.
46:6.0.1.1.3.24.1.3SECTION 160.040-3
     160.040-3 Materials, construction, workmanship, and performance requirements.
46:6.0.1.1.3.24.1.4SECTION 160.040-4
     160.040-4 Equipment for impulse-projected rocket type line-throwing appliance.
46:6.0.1.1.3.24.1.5SECTION 160.040-5
     160.040-5 Approval and production tests.
46:6.0.1.1.3.24.1.6SECTION 160.040-6
     160.040-6 Marking and labeling.
46:6.0.1.1.3.24.1.7SECTION 160.040-7
     160.040-7 Procedure for approval.
46:6.0.1.1.3.25SUBPART 160.041
Subpart 160.041 - Kits, First-Aid, for Merchant Vessels
46:6.0.1.1.3.25.1.1SECTION 160.041-1
     160.041-1 Applicable specification and publication.
46:6.0.1.1.3.25.1.2SECTION 160.041-2
     160.041-2 Type and size.
46:6.0.1.1.3.25.1.3SECTION 160.041-3
     160.041-3 Construction and workmanship.
46:6.0.1.1.3.25.1.4SECTION 160.041-4
     160.041-4 Contents.
46:6.0.1.1.3.25.1.5SECTION 160.041-5
     160.041-5 Inspections and tests.
46:6.0.1.1.3.25.1.6SECTION 160.041-6
     160.041-6 Marking.
46:6.0.1.1.3.26SUBPART 160.042
Subpart 160.042 - Skids, Liferaft, for Merchant Vessels
46:6.0.1.1.3.26.1.1SECTION 160.042-1
     160.042-1 Applicable specification.
46:6.0.1.1.3.26.1.2SECTION 160.042-2
     160.042-2 General requirements.
46:6.0.1.1.3.26.1.3SECTION 160.042-3
     160.042-3 Construction.
46:6.0.1.1.3.26.1.4SECTION 160.042-4
     160.042-4 Inspection.
46:6.0.1.1.3.26.1.5SECTION 160.042-5
     160.042-5 Procedure for approval.
46:6.0.1.1.3.27SUBPART 160.043
Subpart 160.043 - Jackknife (With Can Opener) for Merchant Vessels
46:6.0.1.1.3.27.1.1SECTION 160.043-1
     160.043-1 Applicable specification and plan.
46:6.0.1.1.3.27.1.2SECTION 160.043-2
     160.043-2 Type.
46:6.0.1.1.3.27.1.3SECTION 160.043-3
     160.043-3 Materials.
46:6.0.1.1.3.27.1.4SECTION 160.043-4
     160.043-4 Construction and workmanship.
46:6.0.1.1.3.27.1.5SECTION 160.043-5
     160.043-5 Inspections and tests.
46:6.0.1.1.3.27.1.6SECTION 160.043-6
     160.043-6 Marking and packing.
46:6.0.1.1.3.28SUBPART 160.044
Subpart 160.044 - Pumps, Bilge, Lifeboat, for Merchant Vessels
46:6.0.1.1.3.28.1.1SECTION 160.044-1
     160.044-1 Applicable specifications.
46:6.0.1.1.3.28.1.2SECTION 160.044-2
     160.044-2 Types and sizes.
46:6.0.1.1.3.28.1.3SECTION 160.044-3
     160.044-3 General requirements.
46:6.0.1.1.3.28.1.4SECTION 160.044-4
     160.044-4 Inspection and tests.
46:6.0.1.1.3.28.1.5SECTION 160.044-5
     160.044-5 Marking.
46:6.0.1.1.3.29SUBPART 160.047
Subpart 160.047 - Specification for a Buoyant Vest, Kapok or Fibrous Glass, Adult and Child
46:6.0.1.1.3.29.1.1SECTION 160.047-1
     160.047-1 Incorporation by reference.
46:6.0.1.1.3.29.1.2SECTION 160.047-2
     160.047-2 Model.
46:6.0.1.1.3.29.1.3SECTION 160.047-3
     160.047-3 Materials.
46:6.0.1.1.3.29.1.4SECTION 160.047-3a
     160.047-3a Materials - Dee ring and snap hook assemblies and other instruments of closure for buoyant vests.
46:6.0.1.1.3.29.1.5SECTION 160.047-4
     160.047-4 Construction.
46:6.0.1.1.3.29.1.6SECTION 160.047-5
     160.047-5 Inspections and tests. 1
46:6.0.1.1.3.29.1.7SECTION 160.047-6
     160.047-6 Marking.
46:6.0.1.1.3.29.1.8SECTION 160.047-7
     160.047-7 Recognized laboratory.
46:6.0.1.1.3.30SUBPART 160.048
Subpart 160.048 - Specification for a Buoyant Cushion, Fibrous Glass
46:6.0.1.1.3.30.1.1SECTION 160.048-1
     160.048-1 Incorporation by reference.
46:6.0.1.1.3.30.1.2SECTION 160.048-2
     160.048-2 Types and sizes.
46:6.0.1.1.3.30.1.3SECTION 160.048-3
     160.048-3 Materials.
46:6.0.1.1.3.30.1.4SECTION 160.048-4
     160.048-4 Construction and workmanship.
46:6.0.1.1.3.30.1.5SECTION 160.048-5
     160.048-5 Inspections and tests. 1
46:6.0.1.1.3.30.1.6SECTION 160.048-6
     160.048-6 Marking.
46:6.0.1.1.3.30.1.7SECTION 160.048-7
     160.048-7 Procedure for approval.
46:6.0.1.1.3.30.1.8SECTION 160.048-8
     160.048-8 Recognized laboratory.
46:6.0.1.1.3.31SUBPART 160.049
Subpart 160.049 - Specification for a Buoyant Cushion Plastic Foam
46:6.0.1.1.3.31.1.1SECTION 160.049-1
     160.049-1 Incorporation by reference.
46:6.0.1.1.3.31.1.2SECTION 160.049-2
     160.049-2 Types and sizes.
46:6.0.1.1.3.31.1.3SECTION 160.049-3
     160.049-3 Materials.
46:6.0.1.1.3.31.1.4SECTION 160.049-4
     160.049-4 Construction and workmanship.
46:6.0.1.1.3.31.1.5SECTION 160.049-5
     160.049-5 Inspections and tests. 1
46:6.0.1.1.3.31.1.6SECTION 160.049-6
     160.049-6 Marking.
46:6.0.1.1.3.31.1.7SECTION 160.049-7
     160.049-7 Procedure for approval.
46:6.0.1.1.3.31.1.8SECTION 160.049-8
     160.049-8 Recognized laboratory.
46:6.0.1.1.3.32SUBPART 160.050
Subpart 160.050 - Specification for a Buoy, Life Ring, Unicellular Plastic
46:6.0.1.1.3.32.1.1SECTION 160.050-1
     160.050-1 Incorporation by reference.
46:6.0.1.1.3.32.1.2SECTION 160.050-2
     160.050-2 Types and sizes.
46:6.0.1.1.3.32.1.3SECTION 160.050-3
     160.050-3 Materials.
46:6.0.1.1.3.32.1.4SECTION 160.050-4
     160.050-4 Construction and workmanship.
46:6.0.1.1.3.32.1.5SECTION 160.050-5
     160.050-5 Sampling, tests, and inspection.
46:6.0.1.1.3.32.1.6SECTION 160.050-6
     160.050-6 Marking.
46:6.0.1.1.3.32.1.7SECTION 160.050-7
     160.050-7 Procedure for approval.
46:6.0.1.1.3.33SUBPART 160.051
Subpart 160.051 - Inflatable Liferafts for Domestic Service
46:6.0.1.1.3.33.1.1SECTION 160.051-1
     160.051-1 Scope.
46:6.0.1.1.3.33.1.2SECTION 160.051-3
     160.051-3 Definitions.
46:6.0.1.1.3.33.1.3SECTION 160.051-5
     160.051-5 Incorporation by reference.
46:6.0.1.1.3.33.1.4SECTION 160.051-7
     160.051-7 Design and performance of Coastal Service inflatable liferafts.
46:6.0.1.1.3.33.1.5SECTION 160.051-9
     160.051-9 Design and performance of A and B inflatable liferafts.
46:6.0.1.1.3.33.1.6SECTION 160.051-11
     160.051-11 Equipment required for Coastal Service inflatable liferafts.
46:6.0.1.1.3.34SUBPART 160.052
Subpart 160.052 - Specification for a Buoyant Vest, Unicellular Plastic Foam, Adult and Child
46:6.0.1.1.3.34.1.1SECTION 160.052-1
     160.052-1 Incorporation by reference.
46:6.0.1.1.3.34.1.2SECTION 160.052-2
     160.052-2 Size and model.
46:6.0.1.1.3.34.1.3SECTION 160.052-3
     160.052-3 Materials - standard vests.
46:6.0.1.1.3.34.1.4SECTION 160.052-3a
     160.052-3a Materials - Dee ring and snap hook assemblies and other instruments of closure for buoyant vests.
46:6.0.1.1.3.34.1.5SECTION 160.052-4
     160.052-4 Materials - nonstandard vests.
46:6.0.1.1.3.34.1.6SECTION 160.052-5
     160.052-5 Construction - standard vests.
46:6.0.1.1.3.34.1.7SECTION 160.052-6
     160.052-6 Construction - nonstandard vests.
46:6.0.1.1.3.34.1.8SECTION 160.052-7
     160.052-7 Inspections and tests - standard and nonstandard vests. 1
46:6.0.1.1.3.34.1.9SECTION 160.052-8
     160.052-8 Marking.
46:6.0.1.1.3.34.1.10SECTION 160.052-9
     160.052-9 Recognized laboratory.
46:6.0.1.1.3.35SUBPART 160.053
Subpart 160.053 - Work Vests, Unicellular Plastic Foam
46:6.0.1.1.3.35.1.1SECTION 160.053-1
     160.053-1 Applicable specifications.
46:6.0.1.1.3.35.1.2SECTION 160.053-2
     160.053-2 Type.
46:6.0.1.1.3.35.1.3SECTION 160.053-3
     160.053-3 Materials, construction and workmanship.
46:6.0.1.1.3.35.1.4SECTION 160.053-4
     160.053-4 Inspections and tests.
46:6.0.1.1.3.35.1.5SECTION 160.053-5
     160.053-5 Marking.
46:6.0.1.1.3.35.1.6SECTION 160.053-6
     160.053-6 Procedure for approval.
46:6.0.1.1.3.36SUBPART 160.054
Subpart 160.054 - Kits, First-Aid, for Inflatable Liferafts
46:6.0.1.1.3.36.1.1SECTION 160.054-1
     160.054-1 Applicable specification.
46:6.0.1.1.3.36.1.2SECTION 160.054-2
     160.054-2 Type and size.
46:6.0.1.1.3.36.1.3SECTION 160.054-3
     160.054-3 Construction.
46:6.0.1.1.3.36.1.4SECTION 160.054-4
     160.054-4 Contents.
46:6.0.1.1.3.36.1.5SECTION 160.054-5
     160.054-5 Inspections and tests.
46:6.0.1.1.3.36.1.6SECTION 160.054-6
     160.054-6 Marking.
46:6.0.1.1.3.36.1.7SECTION 160.054-7
     160.054-7 Procedure for approval.
46:6.0.1.1.3.37SUBPART 160.055
Subpart 160.055 - Life Preservers, Unicellular Plastic Foam, Adult and Child, for Merchant Vessels
46:6.0.1.1.3.37.1.1SECTION 160.055-1
     160.055-1 Incorporation by reference.
46:6.0.1.1.3.37.1.2SECTION 160.055-2
     160.055-2 Type and model.
46:6.0.1.1.3.37.1.3SECTION 160.055-3
     160.055-3 Materials - standard life preservers.
46:6.0.1.1.3.37.1.4SECTION 160.055-4
     160.055-4 Materials - nonstandard life preservers.
46:6.0.1.1.3.37.1.5SECTION 160.055-5
     160.055-5 Construction - standard life preservers.
46:6.0.1.1.3.37.1.6SECTION 160.055-6
     160.055-6 Construction - nonstandard, life preservers.
46:6.0.1.1.3.37.1.7SECTION 160.055-7
     160.055-7 Sampling, tests, and inspections.
46:6.0.1.1.3.37.1.8SECTION 160.055-8
     160.055-8 Marking.
46:6.0.1.1.3.37.1.9SECTION 160.055-9
     160.055-9 Procedure for approval - standard and nonstandard life preservers.
46:6.0.1.1.3.38SUBPART 160.056
Subpart 160.056 - Rescue Boat
46:6.0.1.1.3.38.1.1SECTION 160.056-1
     160.056-1 General requirements.
46:6.0.1.1.3.38.1.2SECTION 160.056-2
     160.056-2 Construction.
46:6.0.1.1.3.38.1.3SECTION 160.056-3
     160.056-3 Fittings and equipment.
46:6.0.1.1.3.38.1.4SECTION 160.056-4
     160.056-4 Approval tests of prototype rescue boat.
46:6.0.1.1.3.38.1.5SECTION 160.056-6
     160.056-6 Name plate.
46:6.0.1.1.3.38.1.6SECTION 160.056-7
     160.056-7 Procedure for approval.
46:6.0.1.1.3.39SUBPART 160.057
Subpart 160.057 - Floating Orange Smoke Distress Signals (15 Minutes)
46:6.0.1.1.3.39.1.1SECTION 160.057-1
     160.057-1 Incorporation by reference.
46:6.0.1.1.3.39.1.2SECTION 160.057-2
     160.057-2 Type.
46:6.0.1.1.3.39.1.3SECTION 160.057-3
     160.057-3 Materials, workmanship, construction, and performance requirements.
46:6.0.1.1.3.39.1.4SECTION 160.057-4
     160.057-4 Approval and production tests.
46:6.0.1.1.3.39.1.5SECTION 160.057-5
     160.057-5 Marking.
46:6.0.1.1.3.39.1.6SECTION 160.057-7
     160.057-7 Procedure for approval.
46:6.0.1.1.3.40SUBPART 160.058
Subpart 160.058 - Desalter Kits, Sea Water, for Merchant Vessels
46:6.0.1.1.3.40.1.1SECTION 160.058-1
     160.058-1 Applicable specification.
46:6.0.1.1.3.40.1.2SECTION 160.058-2
     160.058-2 Type.
46:6.0.1.1.3.40.1.3SECTION 160.058-3
     160.058-3 Materials, workmanship, construction and performance requirements.
46:6.0.1.1.3.40.1.4SECTION 160.058-4
     160.058-4 Inspections.
46:6.0.1.1.3.40.1.5SECTION 160.058-5
     160.058-5 Labeling and marking.
46:6.0.1.1.3.41SUBPART 160.060
Subpart 160.060 - Specification for a Buoyant Vest, Unicellular Polyethylene Foam, Adult and Child
46:6.0.1.1.3.41.1.1SECTION 160.060-1
     160.060-1 Incorporation by reference.
46:6.0.1.1.3.41.1.2SECTION 160.060-2
     160.060-2 Type and model.
46:6.0.1.1.3.41.1.3SECTION 160.060-3
     160.060-3 Materials - standard vests.
46:6.0.1.1.3.41.1.4SECTION 160.060-3a
     160.060-3a Materials - Dee ring and snap hook assemblies and other instruments of closure for buoyant vests.
46:6.0.1.1.3.41.1.5SECTION 160.060-4
     160.060-4 Materials - nonstandard vests.
46:6.0.1.1.3.41.1.6SECTION 160.060-5
     160.060-5 Construction - standard vests.
46:6.0.1.1.3.41.1.7SECTION 160.060-6
     160.060-6 Construction - nonstandard vests.
46:6.0.1.1.3.41.1.8SECTION 160.060-7
     160.060-7 Inspections and tests - standard and nonstandard vests. 1
46:6.0.1.1.3.41.1.9SECTION 160.060-8
     160.060-8 Marking.
46:6.0.1.1.3.41.1.10SECTION 160.060-9
     160.060-9 Recognized laboratory.
46:6.0.1.1.3.42SUBPART 160.061
Subpart 160.061 - Fishing Tackle Kits, Emergency, for Merchant Vessels
46:6.0.1.1.3.42.1.1SECTION 160.061-1
     160.061-1 Applicable specifications.
46:6.0.1.1.3.42.1.2SECTION 160.061-2
     160.061-2 Requirements.
46:6.0.1.1.3.42.1.3SECTION 160.061-3
     160.061-3 Design and construction.
46:6.0.1.1.3.42.1.4SECTION 160.061-4
     160.061-4 Kit assembly.
46:6.0.1.1.3.42.1.5SECTION 160.061-5
     160.061-5 Marking.
46:6.0.1.1.3.43SUBPART 160.062
Subpart 160.062 - Releases. Lifesaving Equipment, Hydraulic and Manual
46:6.0.1.1.3.43.1.1SECTION 160.062-1
     160.062-1 Applicable specifications, and referenced material.
46:6.0.1.1.3.43.1.2SECTION 160.062-2
     160.062-2 Types.
46:6.0.1.1.3.43.1.3SECTION 160.062-3
     160.062-3 Materials, construction, workmanship, and performance requirements.
46:6.0.1.1.3.43.1.4SECTION 160.062-4
     160.062-4 Inspections and tests.
46:6.0.1.1.3.43.1.5SECTION 160.062-5
     160.062-5 Markings.
46:6.0.1.1.3.43.1.6SECTION 160.062-6
     160.062-6 Procedure for approval.
46:6.0.1.1.3.43.1.7SECTION 160.062-7
     160.062-7 Procedures for acceptance of repair facility.
46:6.0.1.1.3.43.1.8SECTION 160.062-8
     160.062-8 Procedures for acceptance of testing facility.
46:6.0.1.1.3.44SUBPART 160.064
Subpart 160.064 - Marine Buoyant Devices
46:6.0.1.1.3.44.1.1SECTION 160.064-1
     160.064-1 Applicable specifications.
46:6.0.1.1.3.44.1.2SECTION 160.064-2
     160.064-2 Types and models.
46:6.0.1.1.3.44.1.3SECTION 160.064-3
     160.064-3 Requirements. 1
46:6.0.1.1.3.44.1.4SECTION 160.064-4
     160.064-4 Marking.
46:6.0.1.1.3.44.1.5SECTION 160.064-6
     160.064-6 Examinations, tests and inspections.
46:6.0.1.1.3.44.1.6SECTION 160.064-7
     160.064-7 Recognized laboratory.
46:6.0.1.1.3.45SUBPART 160.066
Subpart 160.066 - Distress Signal for Boats, Red Aerial Pyrotechnic Flare
46:6.0.1.1.3.45.1.1SECTION 160.066-1
     160.066-1 Type.
46:6.0.1.1.3.45.1.2SECTION 160.066-5
     160.066-5 Design, construction, and manufacturing requirements.
46:6.0.1.1.3.45.1.3SECTION 160.066-7
     160.066-7 Performance requirements.
46:6.0.1.1.3.45.1.4SECTION 160.066-9
     160.066-9 Labeling.
46:6.0.1.1.3.45.1.5SECTION 160.066-10
     160.066-10 Expiration date.
46:6.0.1.1.3.45.1.6SECTION 160.066-11
     160.066-11 Approval procedures.
46:6.0.1.1.3.45.1.7SECTION 160.066-12
     160.066-12 Operational tests.
46:6.0.1.1.3.45.1.8SECTION 160.066-13
     160.066-13 Technical tests.
46:6.0.1.1.3.45.1.9SECTION 160.066-15
     160.066-15 Production testing.
46:6.0.1.1.3.46SUBPART 160.071
Subpart 160.071 [Reserved]
46:6.0.1.1.3.47SUBPART 160.072
Subpart 160.072 - Distress Signals for Boats, Orange Flag
46:6.0.1.1.3.47.1.1SECTION 160.072-1
     160.072-1 Applicability.
46:6.0.1.1.3.47.1.2SECTION 160.072-3
     160.072-3 General performance requirements.
46:6.0.1.1.3.47.1.3SECTION 160.072-5
     160.072-5 Accelerated weathering test.
46:6.0.1.1.3.47.1.4SECTION 160.072-7
     160.072-7 Manufacturer certification and labeling.
46:6.0.1.1.3.47.1.5SECTION 160.072-09
     160.072-09 Manufacturer notification.
46:6.0.1.1.3.48SUBPART 160.073
Subpart 160.073 - Float-Free Link or Life Floats and Buoyant Apparatus
46:6.0.1.1.3.48.1.1SECTION 160.073-1
     160.073-1 Scope.
46:6.0.1.1.3.48.1.2SECTION 160.073-5
     160.073-5 Certification.
46:6.0.1.1.3.48.1.3SECTION 160.073-10
     160.073-10 Construction and performance.
46:6.0.1.1.3.48.1.4SECTION 160.073-15
     160.073-15 Tests.
46:6.0.1.1.3.48.1.5SECTION 160.073-20
     160.073-20 Marking.
46:6.0.1.1.3.49SUBPART 160.076
Subpart 160.076 - Inflatable Recreational Personal Flotation Devices
46:6.0.1.1.3.49.1.1SECTION 160.076-1
     160.076-1 Scope.
46:6.0.1.1.3.49.1.2SECTION 160.076-3
     160.076-3 Applicability.
46:6.0.1.1.3.49.1.3SECTION 160.076-5
     160.076-5 Definitions.
46:6.0.1.1.3.49.1.4SECTION 160.076-7
     160.076-7 [Reserved]
46:6.0.1.1.3.49.1.5SECTION 160.076-9
     160.076-9 Conditional approval.
46:6.0.1.1.3.49.1.6SECTION 160.076-11
     160.076-11 Incorporation by reference.
46:6.0.1.1.3.49.1.7SECTION 160.076-13
     160.076-13 Approval procedures for inflatable PFDs.
46:6.0.1.1.3.49.1.8SECTION 160.076-15
     160.076-15 Suspension or termination of approval.
46:6.0.1.1.3.49.1.9SECTION 160.076-17
     160.076-17 Approval of design or material changes.
46:6.0.1.1.3.49.1.10SECTION 160.076-19
     160.076-19 Recognized laboratories.
46:6.0.1.1.3.49.1.11SECTION 160.076-21
     160.076-21 Component materials.
46:6.0.1.1.3.49.1.12SECTION 160.076-23
     160.076-23 Construction and performance requirements.
46:6.0.1.1.3.49.1.13SECTION 160.076-25
     160.076-25 Approval testing.
46:6.0.1.1.3.49.1.14SECTION 160.076-27
     160.076-27 [Reserved]
46:6.0.1.1.3.49.1.15SECTION 160.076-29
     160.076-29 Production oversight.
46:6.0.1.1.3.49.1.16SECTION 160.076-31
     160.076-31 Production tests and examinations.
46:6.0.1.1.3.49.1.17SECTION 160.076-33
     160.076-33 Manufacturer records.
46:6.0.1.1.3.49.1.18SECTION 160.076-35
     160.076-35 Information pamphlet.
46:6.0.1.1.3.49.1.19SECTION 160.076-37
     160.076-37 Owner's manual.
46:6.0.1.1.3.49.1.20SECTION 160.076-39
     160.076-39 Marking.
46:6.0.1.1.3.50SUBPART 160.077
Subpart 160.077 - Hybrid Inflatable Personal Flotation Devices
46:6.0.1.1.3.50.1.1SECTION 160.077-1
     160.077-1 Scope.
46:6.0.1.1.3.50.1.2SECTION 160.077-2
     160.077-2 Definitions.
46:6.0.1.1.3.50.1.3SECTION 160.077-3
     160.077-3 Required to be worn.
46:6.0.1.1.3.50.1.4SECTION 160.077-4
     160.077-4 Type.
46:6.0.1.1.3.50.1.5SECTION 160.077-5
     160.077-5 Incorporation by reference.
46:6.0.1.1.3.50.1.6SECTION 160.077-6
     160.077-6 Approval procedures.
46:6.0.1.1.3.50.1.7SECTION 160.077-7
     160.077-7 Procedure for approval of design or material revision.
46:6.0.1.1.3.50.1.8SECTION 160.077-9
     160.077-9 Recognized laboratory.
46:6.0.1.1.3.50.1.9SECTION 160.077-11
     160.077-11 Materials - Recreational Hybrid PFD's.
46:6.0.1.1.3.50.1.10SECTION 160.077-13
     160.077-13 Materials - Type I and Commercial Hybrid PFD.
46:6.0.1.1.3.50.1.11SECTION 160.077-15
     160.077-15 Construction and Performance - Recreational Hybrid PFD.
46:6.0.1.1.3.50.1.12SECTION 160.077-17
     160.077-17 Construction and Performance - Type I and Commercial Hybrid PFD.
46:6.0.1.1.3.50.1.13SECTION 160.077-19
     160.077-19 Approval Testing - Recreational Hybrid PFD's.
46:6.0.1.1.3.50.1.14SECTION 160.077-21
     160.077-21 Approval Testing - Type I and Commercial Hybrid PFD.
46:6.0.1.1.3.50.1.15SECTION 160.077-23
     160.077-23 Production tests and inspections.
46:6.0.1.1.3.50.1.16SECTION 160.077-25
     160.077-25 Manufacturer records.
46:6.0.1.1.3.50.1.17SECTION 160.077-27
     160.077-27 Pamphlet.
46:6.0.1.1.3.50.1.18SECTION 160.077-29
     160.077-29 PFD Manuals.
46:6.0.1.1.3.50.1.19SECTION 160.077-30
     160.077-30 Spare operating components and temporary marking.
46:6.0.1.1.3.50.1.20SECTION 160.077-31
     160.077-31 PFD Marking.
46:6.0.1.1.3.51SUBPART 160.115
Subpart 160.115 - Launching Appliances - Winches
46:6.0.1.1.3.51.1.1SECTION 160.115-1
     160.115-1 Scope.
46:6.0.1.1.3.51.1.2SECTION 160.115-3
     160.115-3 Definitions.
46:6.0.1.1.3.51.1.3SECTION 160.115-5
     160.115-5 Incorporation by reference.
46:6.0.1.1.3.51.1.4SECTION 160.115-7
     160.115-7 Design, construction, and performance of winches.
46:6.0.1.1.3.51.1.5SECTION 160.115-9
     160.115-9 Preapproval review.
46:6.0.1.1.3.51.1.6SECTION 160.115-11
     160.115-11 [Reserved]
46:6.0.1.1.3.51.1.7SECTION 160.115-13
     160.115-13 Approval inspections and tests for prototype winches.
46:6.0.1.1.3.51.1.8SECTION 160.115-15
     160.115-15 Production inspections, tests, quality control, and conformance of winches.
46:6.0.1.1.3.51.1.9SECTION 160.115-17
     160.115-17 Marking and labeling.
46:6.0.1.1.3.51.1.10SECTION 160.115-19
     160.115-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.51.1.11SECTION 160.115-21
     160.115-21 Operation and maintenance instructions.
46:6.0.1.1.3.51.1.12SECTION 160.115-23
     160.115-23 Procedure for approval of design or material change.
46:6.0.1.1.3.52SUBPART 160.132
Subpart 160.132 - Launching Appliances - Davits
46:6.0.1.1.3.52.1.1SECTION 160.132-1
     160.132-1 Scope.
46:6.0.1.1.3.52.1.2SECTION 160.132-3
     160.132-3 Definitions.
46:6.0.1.1.3.52.1.3SECTION 160.132-5
     160.132-5 Incorporation by reference.
46:6.0.1.1.3.52.1.4SECTION 160.132-7
     160.132-7 Design, construction, and performance of davits.
46:6.0.1.1.3.52.1.5SECTION 160.132-9
     160.132-9 Preapproval review.
46:6.0.1.1.3.52.1.6SECTION 160.132-11
     160.132-11 [Reserved]
46:6.0.1.1.3.52.1.7SECTION 160.132-13
     160.132-13 Approval inspections and tests for prototype davits.
46:6.0.1.1.3.52.1.8SECTION 160.132-15
     160.132-15 Production inspections, tests, quality control, and conformance of davits.
46:6.0.1.1.3.52.1.9SECTION 160.132-17
     160.132-17 Marking and labeling.
46:6.0.1.1.3.52.1.10SECTION 160.132-19
     160.132-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.52.1.11SECTION 160.132-21
     160.132-21 Operation and maintenance instructions.
46:6.0.1.1.3.52.1.12SECTION 160.132-23
     160.132-23 Procedure for approval of design or material change.
46:6.0.1.1.3.53SUBPART 160.133
Subpart 160.133 - Release Mechanisms for Lifeboats and Rescue Boats
46:6.0.1.1.3.53.1.1SECTION 160.133-1
     160.133-1 Scope.
46:6.0.1.1.3.53.1.2SECTION 160.133-3
     160.133-3 Definitions.
46:6.0.1.1.3.53.1.3SECTION 160.133-5
     160.133-5 Incorporation by reference.
46:6.0.1.1.3.53.1.4SECTION 160.133-7
     160.133-7 Design, construction, and performance of release mechanisms.
46:6.0.1.1.3.53.1.5SECTION 160.133-9
     160.133-9 Preapproval review.
46:6.0.1.1.3.53.1.6SECTION 160.133-11
     160.133-11 [Reserved]
46:6.0.1.1.3.53.1.7SECTION 160.133-13
     160.133-13 Approval inspections and tests for prototype release mechanisms.
46:6.0.1.1.3.53.1.8SECTION 160.133-15
     160.133-15 Production inspections, tests, quality control, and conformance of release mechanisms.
46:6.0.1.1.3.53.1.9SECTION 160.133-17
     160.133-17 Marking and labeling.
46:6.0.1.1.3.53.1.10SECTION 160.133-19
     160.133-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.53.1.11SECTION 160.133-21
     160.133-21 Operation and maintenance instructions.
46:6.0.1.1.3.53.1.12SECTION 160.133-23
     160.133-23 Procedure for approval of design, material, or construction change.
46:6.0.1.1.3.54SUBPART 160.135
Subpart 160.135 - Lifeboats
46:6.0.1.1.3.54.1.1SECTION 160.135-1
     160.135-1 Scope.
46:6.0.1.1.3.54.1.2SECTION 160.135-3
     160.135-3 Definitions.
46:6.0.1.1.3.54.1.3SECTION 160.135-5
     160.135-5 Incorporation by reference.
46:6.0.1.1.3.54.1.4SECTION 160.135-7
     160.135-7 Design, construction, and performance of lifeboats.
46:6.0.1.1.3.54.1.5SECTION 160.135-9
     160.135-9 Preapproval review.
46:6.0.1.1.3.54.1.6SECTION 160.135-11
     160.135-11 Fabrication of prototype lifeboats for approval.
46:6.0.1.1.3.54.1.7SECTION 160.135-13
     160.135-13 Approval inspections and tests for prototype lifeboats.
46:6.0.1.1.3.54.1.8SECTION 160.135-15
     160.135-15 Production inspections, tests, quality control, and conformance of lifeboats.
46:6.0.1.1.3.54.1.9SECTION 160.135-17
     160.135-17 Marking and labeling.
46:6.0.1.1.3.54.1.10SECTION 160.135-19
     160.135-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.54.1.11SECTION 160.135-21
     160.135-21 Operation and maintenance instructions.
46:6.0.1.1.3.54.1.12SECTION 160.135-23
     160.135-23 Procedure for approval of design, material, or construction change.
46:6.0.1.1.3.55SUBPART 160.151
Subpart 160.151 - Inflatable Liferafts (SOLAS)
46:6.0.1.1.3.55.1.1SECTION 160.151-1
     160.151-1 Scope.
46:6.0.1.1.3.55.1.2SECTION 160.151-3
     160.151-3 Definitions.
46:6.0.1.1.3.55.1.3SECTION 160.151-5
     160.151-5 Incorporation by reference.
46:6.0.1.1.3.55.1.4SECTION 160.151-7
     160.151-7 Construction of inflatable liferafts.
46:6.0.1.1.3.55.1.5SECTION 160.151-9
     160.151-9 Independent laboratory.
46:6.0.1.1.3.55.1.6SECTION 160.151-11
     160.151-11 Approval procedure.
46:6.0.1.1.3.55.1.7SECTION 160.151-13
     160.151-13 Fabrication of prototype inflatable liferafts for approval.
46:6.0.1.1.3.55.1.8SECTION 160.151-15
     160.151-15 Design and performance of inflatable liferafts.
46:6.0.1.1.3.55.1.9SECTION 160.151-17
     160.151-17 Additional requirements for design and performance of SOLAS A and SOLAS B inflatable liferafts.
46:6.0.1.1.3.55.1.10SECTION 160.151-21
     160.151-21 Equipment required for SOLAS A and SOLAS B inflatable liferafts.
46:6.0.1.1.3.55.1.11SECTION 160.151-25
     160.151-25 Additional equipment for inflatable liferafts.
46:6.0.1.1.3.55.1.12SECTION 160.151-27
     160.151-27 Approval inspections and tests for inflatable liferafts.
46:6.0.1.1.3.55.1.13SECTION 160.151-29
     160.151-29 Additional approval tests for SOLAS A and SOLAS B inflatable liferafts.
46:6.0.1.1.3.55.1.14SECTION 160.151-31
     160.151-31 Production inspections and tests of inflatable liferafts.
46:6.0.1.1.3.55.1.15SECTION 160.151-33
     160.151-33 Marking and labeling.
46:6.0.1.1.3.55.1.16SECTION 160.151-35
     160.151-35 Servicing.
46:6.0.1.1.3.55.1.17SECTION 160.151-37
     160.151-37 Servicing manual.
46:6.0.1.1.3.55.1.18SECTION 160.151-39
     160.151-39 Training of servicing technicians.
46:6.0.1.1.3.55.1.19SECTION 160.151-41
     160.151-41 Approval of servicing facilities.
46:6.0.1.1.3.55.1.20SECTION 160.151-43
     160.151-43 Conditions at servicing facilities.
46:6.0.1.1.3.55.1.21SECTION 160.151-45
     160.151-45 Equipment required for servicing facilities.
46:6.0.1.1.3.55.1.22SECTION 160.151-47
     160.151-47 Requirements for owners or operators of servicing facilities.
46:6.0.1.1.3.55.1.23SECTION 160.151-49
     160.151-49 Approval of servicing facilities at remote sites.
46:6.0.1.1.3.55.1.24SECTION 160.151-51
     160.151-51 Notice of approval.
46:6.0.1.1.3.55.1.25SECTION 160.151-53
     160.151-53 Notice to OCMI of servicing.
46:6.0.1.1.3.55.1.26SECTION 160.151-55
     160.151-55 Withdrawal of approval.
46:6.0.1.1.3.55.1.27SECTION 160.151-57
     160.151-57 Servicing procedure.
46:6.0.1.1.3.55.1.28SECTION 160.151-59
     160.151-59 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.55.1.29SECTION 160.151-61
     160.151-61 Maintenance instructions.
46:6.0.1.1.3.56SUBPART 160.156
Subpart 160.156 - Rescue Boats and Fast Rescue Boats (SOLAS)
46:6.0.1.1.3.56.1.1SECTION 160.156-1
     160.156-1 Scope.
46:6.0.1.1.3.56.1.2SECTION 160.156-3
     160.156-3 Definitions.
46:6.0.1.1.3.56.1.3SECTION 160.156-5
     160.156-5 Incorporation by reference.
46:6.0.1.1.3.56.1.4SECTION 160.156-7
     160.156-7 Design, construction and performance of rescue boats and fast rescue boats.
46:6.0.1.1.3.56.1.5SECTION 160.156-9
     160.156-9 Preapproval review.
46:6.0.1.1.3.56.1.6SECTION 160.156-11
     160.156-11 Fabrication of prototype rescue boats and fast rescue boats for approval.
46:6.0.1.1.3.56.1.7SECTION 160.156-13
     160.156-13 Approval inspections and tests for prototype rescue boats and fast rescue boats.
46:6.0.1.1.3.56.1.8SECTION 160.156-15
     160.156-15 Production inspections, tests, quality control, and conformance of rescue boats and fast rescue boats.
46:6.0.1.1.3.56.1.9SECTION 160.156-17
     160.156-17 Marking and labeling.
46:6.0.1.1.3.56.1.10SECTION 160.156-19
     160.156-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.56.1.11SECTION 160.156-21
     160.156-21 Operation and maintenance instructions.
46:6.0.1.1.3.56.1.12SECTION 160.156-23
     160.156-23 Procedure for approval of design, material, or construction change.
46:6.0.1.1.3.57SUBPART 160.170
Subpart 160.170 - Davit-Launched Liferaft Automatic Release Hooks (SOLAS)
46:6.0.1.1.3.57.1.1SECTION 160.170-1
     160.170-1 Scope.
46:6.0.1.1.3.57.1.2SECTION 160.170-3
     160.170-3 Definitions.
46:6.0.1.1.3.57.1.3SECTION 160.170-5
     160.170-5 Incorporation by reference.
46:6.0.1.1.3.57.1.4SECTION 160.170-7
     160.170-7 Design, construction, and performance of automatic release mechanisms.
46:6.0.1.1.3.57.1.5SECTION 160.170-9
     160.170-9 Preapproval review.
46:6.0.1.1.3.57.1.6SECTION 160.170-11
     160.170-11 [Reserved]
46:6.0.1.1.3.57.1.7SECTION 160.170-13
     160.170-13 Approval inspections and tests for prototype automatic release mechanisms.
46:6.0.1.1.3.57.1.8SECTION 160.170-15
     160.170-15 Production inspections, tests, quality control, and conformance of release mechanisms.
46:6.0.1.1.3.57.1.9SECTION 160.170-17
     160.170-17 Marking and labeling.
46:6.0.1.1.3.57.1.10SECTION 160.170-19
     160.170-19 Operating instructions and information for the ship's training manual.
46:6.0.1.1.3.57.1.11SECTION 160.170-21
     160.170-21 Operation and maintenance instructions.
46:6.0.1.1.3.57.1.12SECTION 160.170-23
     160.170-23 Procedure for approval of design, material, or construction change.
46:6.0.1.1.3.58SUBPART 160.171
Subpart 160.171 - Immersion Suits
46:6.0.1.1.3.58.1.1SECTION 160.171-1
     160.171-1 Scope.
46:6.0.1.1.3.58.1.2SECTION 160.171-3
     160.171-3 Incorporation by reference.
46:6.0.1.1.3.58.1.3SECTION 160.171-5
     160.171-5 Independent laboratory.
46:6.0.1.1.3.58.1.4SECTION 160.171-7
     160.171-7 Approval procedures.
46:6.0.1.1.3.58.1.5SECTION 160.171-9
     160.171-9 Construction.
46:6.0.1.1.3.58.1.6SECTION 160.171-11
     160.171-11 Performance.
46:6.0.1.1.3.58.1.7SECTION 160.171-13
     160.171-13 Storage case.
46:6.0.1.1.3.58.1.8SECTION 160.171-15
     160.171-15 Instructions.
46:6.0.1.1.3.58.1.9SECTION 160.171-17
     160.171-17 Approval testing for adult size immersion suit.
46:6.0.1.1.3.58.1.10SECTION 160.171-19
     160.171-19 Approval testing for child size immersion suit.
46:6.0.1.1.3.58.1.11SECTION 160.171-23
     160.171-23 Marking.
46:6.0.1.1.3.58.1.12SECTION 160.171-25
     160.171-25 Production testing.
46:6.0.1.1.3.59SUBPART 160.174
Subpart 160.174 - Thermal Protective Aids
46:6.0.1.1.3.59.1.1SECTION 160.174-1
     160.174-1 Scope.
46:6.0.1.1.3.59.1.2SECTION 160.174-3
     160.174-3 Incorporation by reference.
46:6.0.1.1.3.59.1.3SECTION 160.174-5
     160.174-5 Independent laboratory.
46:6.0.1.1.3.59.1.4SECTION 160.174-7
     160.174-7 Approval procedures.
46:6.0.1.1.3.59.1.5SECTION 160.174-9
     160.174-9 Construction.
46:6.0.1.1.3.59.1.6SECTION 160.174-11
     160.174-11 Performance.
46:6.0.1.1.3.59.1.7SECTION 160.174-13
     160.174-13 Storage case.
46:6.0.1.1.3.59.1.8SECTION 160.174-15
     160.174-15 Instructions.
46:6.0.1.1.3.59.1.9SECTION 160.174-17
     160.174-17 Approval testing.
46:6.0.1.1.3.59.1.10SECTION 160.174-23
     160.174-23 Marking.
46:6.0.1.1.3.59.1.11SECTION 160.174-25
     160.174-25 Production testing.
46:6.0.1.1.3.60SUBPART 160.176
Subpart 160.176 - Inflatable Lifejackets
46:6.0.1.1.3.60.1.1SECTION 160.176-1
     160.176-1 Scope.
46:6.0.1.1.3.60.1.2SECTION 160.176-2
     160.176-2 Application.
46:6.0.1.1.3.60.1.3SECTION 160.176-3
     160.176-3 Definitions.
46:6.0.1.1.3.60.1.4SECTION 160.176-4
     160.176-4 Incorporation by reference.
46:6.0.1.1.3.60.1.5SECTION 160.176-5
     160.176-5 Approval procedures.
46:6.0.1.1.3.60.1.6SECTION 160.176-6
     160.176-6 Procedure for approval of design or material revision.
46:6.0.1.1.3.60.1.7SECTION 160.176-7
     160.176-7 Independent laboratories.
46:6.0.1.1.3.60.1.8SECTION 160.176-8
     160.176-8 Materials.
46:6.0.1.1.3.60.1.9SECTION 160.176-9
     160.176-9 Construction.
46:6.0.1.1.3.60.1.10SECTION 160.176-11
     160.176-11 Performance.
46:6.0.1.1.3.60.1.11SECTION 160.176-13
     160.176-13 Approval Tests.
46:6.0.1.1.3.60.1.12SECTION 160.176-15
     160.176-15 Production tests and inspections.
46:6.0.1.1.3.60.1.13SECTION 160.176-17
     160.176-17 Manufacturer records.
46:6.0.1.1.3.60.1.14SECTION 160.176-19
     160.176-19 Servicing.
46:6.0.1.1.3.60.1.15SECTION 160.176-21
     160.176-21 User manuals.
46:6.0.1.1.3.60.1.16SECTION 160.176-23
     160.176-23 Marking.
46:6.0.1.1.4PART 161
PART 161 - ELECTRICAL EQUIPMENT
46:6.0.1.1.4.1SUBPART 161.001
Subpart 161.001 [Reserved]
46:6.0.1.1.4.2SUBPART 161.002
Subpart 161.002 - Fire Detection Systems
46:6.0.1.1.4.2.1.1SECTION 161.002-1
     161.002-1 Incorporation by reference.
46:6.0.1.1.4.2.1.2SECTION 161.002-2
     161.002-2 Definitions.
46:6.0.1.1.4.2.1.3SECTION 161.002-3
     161.002-3 [Reserved]
46:6.0.1.1.4.2.1.4SECTION 161.002-4
     161.002-4 General requirements.
46:6.0.1.1.4.2.1.5SECTION 161.002-6
     161.002-6 Testing requirements.
46:6.0.1.1.4.2.1.6SECTION 161.002-8
     161.002-8 Automatic fire detecting systems, general requirements.
46:6.0.1.1.4.2.1.7SECTION 161.002-9
     161.002-9 Fire detection system, power supply.
46:6.0.1.1.4.2.1.8SECTION 161.002-10
     161.002-10 Fire detection system control unit.
46:6.0.1.1.4.2.1.9SECTION 161.002-15
     161.002-15 Sample extraction smoke detection systems.
46:6.0.1.1.4.2.1.10SECTION 161.002-17
     161.002-17 Equivalents.
46:6.0.1.1.4.2.1.11SECTION 161.002-18
     161.002-18 System method of applications for type approval.
46:6.0.1.1.4.2.1.12SECTION 161.002-19
     161.002-19 Device method of application for type approval.
46:6.0.1.1.4.3SUBPART 161.006
Subpart 161.006 - Searchlights, Motor Lifeboat, for Merchant Vessels
46:6.0.1.1.4.3.1.1SECTION 161.006-1
     161.006-1 Applicable specifications.
46:6.0.1.1.4.3.1.2SECTION 161.006-2
     161.006-2 Type.
46:6.0.1.1.4.3.1.3SECTION 161.006-3
     161.006-3 Materials and workmanship.
46:6.0.1.1.4.3.1.4SECTION 161.006-4
     161.006-4 Requirements.
46:6.0.1.1.4.3.1.5SECTION 161.006-5
     161.006-5 Sampling, inspections and tests.
46:6.0.1.1.4.3.1.6SECTION 161.006-6
     161.006-6 Procedure for approval.
46:6.0.1.1.4.4SUBPART 161.008
Subpart 161.008 [Reserved]
46:6.0.1.1.4.5SUBPART 161.010
Subpart 161.010 - Floating Electric Waterlight
46:6.0.1.1.4.5.1.1SECTION 161.010-1
     161.010-1 Incorporation by reference.
46:6.0.1.1.4.5.1.2SECTION 161.010-2
     161.010-2 Design, construction, and test requirements.
46:6.0.1.1.4.5.1.3SECTION 161.010-3
     161.010-3 Inspections and methods of test.
46:6.0.1.1.4.5.1.4SECTION 161.010-4
     161.010-4 Procedure for approval.
46:6.0.1.1.4.6SUBPART 161.011
Subpart 161.011 - Emergency Position Indicating Radiobeacons
46:6.0.1.1.4.6.1.1SECTION 161.011-1
     161.011-1 Purpose.
46:6.0.1.1.4.6.1.2SECTION 161.011-5
     161.011-5 Classes.
46:6.0.1.1.4.6.1.3SECTION 161.011-10
     161.011-10 EPIRB approval.
46:6.0.1.1.4.7SUBPART 161.012
Subpart 161.012 - Personal Flotation Device Lights
46:6.0.1.1.4.7.1.1SECTION 161.012-1
     161.012-1 Scope.
46:6.0.1.1.4.7.1.2SECTION 161.012-3
     161.012-3 Definitions.
46:6.0.1.1.4.7.1.3SECTION 161.012-5
     161.012-5 Approval procedures.
46:6.0.1.1.4.7.1.4SECTION 161.012-7
     161.012-7 Construction.
46:6.0.1.1.4.7.1.5SECTION 161.012-9
     161.012-9 Performance.
46:6.0.1.1.4.7.1.6SECTION 161.012-11
     161.012-11 Approval tests.
46:6.0.1.1.4.7.1.7SECTION 161.012-13
     161.012-13 Production tests and inspections.
46:6.0.1.1.4.7.1.8SECTION 161.012-15
     161.012-15 Markings.
46:6.0.1.1.4.7.1.9SECTION 161.012-17
     161.012-17 Instructions.
46:6.0.1.1.4.8SUBPART 161.013
Subpart 161.013 - Electric Distress Light for Boats
46:6.0.1.1.4.8.1.1SECTION 161.013-1
     161.013-1 Applicability.
46:6.0.1.1.4.8.1.2SECTION 161.013-3
     161.013-3 General performance requirements.
46:6.0.1.1.4.8.1.3SECTION 161.013-5
     161.013-5 Intensity requirements.
46:6.0.1.1.4.8.1.4SECTION 161.013-7
     161.013-7 Signal requirements.
46:6.0.1.1.4.8.1.5SECTION 161.013-9
     161.013-9 Independent power source.
46:6.0.1.1.4.8.1.6SECTION 161.013-11
     161.013-11 Prototype test.
46:6.0.1.1.4.8.1.7SECTION 161.013-13
     161.013-13 Manufacturer certification and labeling.
46:6.0.1.1.4.8.1.8SECTION 161.013-17
     161.013-17 Manufacturer notification.
46:6.0.1.1.5PART 162
PART 162 - ENGINEERING EQUIPMENT
46:6.0.1.1.5.1SUBPART 162.017
Subpart 162.017 - General Provisions; Valves, Pressure-Vacuum Relief, for Tank Vessels
46:6.0.1.1.5.1.1.1SECTION 162.017-1
     162.017-1 Preemptive effect; incorporation by reference.
46:6.0.1.1.5.1.1.2SECTION 162.017-2
     162.017-2 Type.
46:6.0.1.1.5.1.1.3SECTION 162.017-3
     162.017-3 Materials, construction, and workmanship.
46:6.0.1.1.5.1.1.4SECTION 162.017-4
     162.017-4 Inspections and testing.
46:6.0.1.1.5.1.1.5SECTION 162.017-5
     162.017-5 Marking.
46:6.0.1.1.5.1.1.6SECTION 162.017-6
     162.017-6 Procedure for approval.
46:6.0.1.1.5.2SUBPART 162.018
Subpart 162.018 - Safety Relief Valves, Liquefied Compressed Gas
46:6.0.1.1.5.2.1.1SECTION 162.018-1
     162.018-1 Applicable specifications, and referenced material.
46:6.0.1.1.5.2.1.2SECTION 162.018-2
     162.018-2 Scope.
46:6.0.1.1.5.2.1.3SECTION 162.018-3
     162.018-3 Materials.
46:6.0.1.1.5.2.1.4SECTION 162.018-4
     162.018-4 Construction and workmanship.
46:6.0.1.1.5.2.1.5SECTION 162.018-5
     162.018-5 Blow-down adjustment and popping tolerance.
46:6.0.1.1.5.2.1.6SECTION 162.018-6
     162.018-6 Marking.
46:6.0.1.1.5.2.1.7SECTION 162.018-7
     162.018-7 Flow rating tests.
46:6.0.1.1.5.2.1.8SECTION 162.018-8
     162.018-8 Procedure for approval.
46:6.0.1.1.5.3SUBPART 162.027
Subpart 162.027 - Combination Firehose Nozzles
46:6.0.1.1.5.3.1.1SECTION 162.027-1
     162.027-1 Scope.
46:6.0.1.1.5.3.1.2SECTION 162.027-2
     162.027-2 Incorporation by reference.
46:6.0.1.1.5.3.1.3SECTION 162.027-3
     162.027-3 Design, construction, testing, and marking requirements.
46:6.0.1.1.5.3.1.4SECTION 162.027-4
     162.027-4 Approval procedures.
46:6.0.1.1.5.4SUBPART 162.028
Subpart 162.028 - Extinguishers, Fire, Portable, Marine Type
46:6.0.1.1.5.4.1.1SECTION 162.028-1
     162.028-1 Incorporation by reference.
46:6.0.1.1.5.4.1.2SECTION 162.028-2
     162.028-2 Classification.
46:6.0.1.1.5.4.1.3SECTION 162.028-3
     162.028-3 Requirements.
46:6.0.1.1.5.4.1.4SECTION 162.028-4
     162.028-4 Marine type label.
46:6.0.1.1.5.4.1.5SECTION 162.028-5
     162.028-5 Recognized laboratories.
46:6.0.1.1.5.4.1.6SECTION 162.028-6
     162.028-6 Examinations, tests, and inspections.
46:6.0.1.1.5.4.1.7SECTION 162.028-7
     162.028-7 Procedure for listing and labeling.
46:6.0.1.1.5.4.1.8SECTION 162.028-8
     162.028-8 Termination of listing or labeling.
46:6.0.1.1.5.5SUBPART 162.039
Subpart 162.039 - Extinguishers, Fire, Semi-portable, Marine Type
46:6.0.1.1.5.5.1.1SECTION 162.039-1
     162.039-1 Incorporation by reference.
46:6.0.1.1.5.5.1.2SECTION 162.039-2
     162.039-2 Classification.
46:6.0.1.1.5.5.1.3SECTION 162.039-3
     162.039-3 Requirements.
46:6.0.1.1.5.5.1.4SECTION 162.039-4
     162.039-4 Marine type label.
46:6.0.1.1.5.5.1.5SECTION 162.039-5
     162.039-5 Recognized laboratories.
46:6.0.1.1.5.5.1.6SECTION 162.039-6
     162.039-6 Examinations, tests, and inspections.
46:6.0.1.1.5.5.1.7SECTION 162.039-7
     162.039-7 Procedure for listing and labeling.
46:6.0.1.1.5.5.1.8SECTION 162.039-8
     162.039-8 Termination of listing or labeling.
46:6.0.1.1.5.6SUBPART 162.050
Subpart 162.050 - Pollution Prevention Equipment
46:6.0.1.1.5.6.1.1SECTION 162.050-1
     162.050-1 Scope.
46:6.0.1.1.5.6.1.2SECTION 162.050-3
     162.050-3 Definitions.
46:6.0.1.1.5.6.1.3SECTION 162.050-4
     162.050-4 Incorporation by reference: Where can I get a copy of the publications mentioned in this part
46:6.0.1.1.5.6.1.4SECTION 162.050-5
     162.050-5 Contents of application.
46:6.0.1.1.5.6.1.5SECTION 162.050-7
     162.050-7 Approval procedures.
46:6.0.1.1.5.6.1.6SECTION 162.050-9
     162.050-9 Test report.
46:6.0.1.1.5.6.1.7SECTION 162.050-11
     162.050-11 Marking.
46:6.0.1.1.5.6.1.8SECTION 162.050-13
     162.050-13 Factory production and inspection.
46:6.0.1.1.5.6.1.9SECTION 162.050-15
     162.050-15 Designation of facilities.
46:6.0.1.1.5.6.1.10SECTION 162.050-17
     162.050-17 Separator test rig.
46:6.0.1.1.5.6.1.11SECTION 162.050-19
     162.050-19 Oil content meter and bilge alarm test rig.
46:6.0.1.1.5.6.1.12SECTION 162.050-20
     162.050-20 Separator and bilge alarm test fluids.
46:6.0.1.1.5.6.1.13SECTION 162.050-21
     162.050-21 Separator: Design specification.
46:6.0.1.1.5.6.1.14SECTION 162.050-23
     162.050-23 Separator: Approval tests.
46:6.0.1.1.5.6.1.15SECTION 162.050-25
     162.050-25 Cargo monitor: Design specification.
46:6.0.1.1.5.6.1.16SECTION 162.050-27
     162.050-27 Oil content meter: Approval tests.
46:6.0.1.1.5.6.1.17SECTION 162.050-33
     162.050-33 Bilge alarm: Design specification.
46:6.0.1.1.5.6.1.18SECTION 162.050-35
     162.050-35 Bilge alarm: Approval tests.
46:6.0.1.1.5.6.1.19SECTION 162.050-37
     162.050-37 Vibration test.
46:6.0.1.1.5.6.1.20SECTION 162.050-39
     162.050-39 Measurement of oil content.
46:6.0.1.1.5.7SUBPART 162.060
Subpart 162.060 - Ballast Water Management Systems
46:6.0.1.1.5.7.1.1SECTION 162.060-1
     162.060-1 Purpose and scope.
46:6.0.1.1.5.7.1.2SECTION 162.060-3
     162.060-3 Definitions.
46:6.0.1.1.5.7.1.3SECTION 162.060-5
     162.060-5 Incorporation by reference.
46:6.0.1.1.5.7.1.4SECTION 162.060-10
     162.060-10 Approval procedures.
46:6.0.1.1.5.7.1.5SECTION 162.060-12
     162.060-12 Use and acceptance of existing test data.
46:6.0.1.1.5.7.1.6SECTION 162.060-14
     162.060-14 Information requirements for the ballast water management system (BWMS) application.
46:6.0.1.1.5.7.1.7SECTION 162.060-16
     162.060-16 Changes to an approved ballast water management system (BWMS).
46:6.0.1.1.5.7.1.8SECTION 162.060-18
     162.060-18 Suspension, withdrawal, or termination of approval.
46:6.0.1.1.5.7.1.9SECTION 162.060-20
     162.060-20 Design and construction requirements.
46:6.0.1.1.5.7.1.10SECTION 162.060-22
     162.060-22 Marking requirements.
46:6.0.1.1.5.7.1.11SECTION 162.060-24
     162.060-24 Test Plan requirements.
46:6.0.1.1.5.7.1.12SECTION 162.060-26
     162.060-26 Land-based testing requirements.
46:6.0.1.1.5.7.1.13SECTION 162.060-28
     162.060-28 Shipboard testing requirements.
46:6.0.1.1.5.7.1.14SECTION 162.060-30
     162.060-30 Testing requirements for ballast water management system (BWMS) components.
46:6.0.1.1.5.7.1.15SECTION 162.060-32
     162.060-32 Testing and evaluation requirements for active substances, preparations, and relevant chemicals.
46:6.0.1.1.5.7.1.16SECTION 162.060-34
     162.060-34 Test Report requirements.
46:6.0.1.1.5.7.1.17SECTION 162.060-36
     162.060-36 Quality Assurance Project Plan (QAPP) requirements.
46:6.0.1.1.5.7.1.18SECTION 162.060-38
     162.060-38 Operation, Maintenance, and Safety Manual (OMSM).
46:6.0.1.1.5.7.1.19SECTION 162.060-40
     162.060-40 Requirements for Independent Laboratories (ILs).
46:6.0.1.1.5.7.1.20SECTION 162.060-42
     162.060-42 Responsibilities for Independent Laboratories (ILs).
46:6.0.1.1.5.8SUBPART 162.161
Subpart 162.161 - Fixed Clean Agent Fire Extinguishing Systems
46:6.0.1.1.5.8.1.1SECTION 162.161-1
     162.161-1 Scope.
46:6.0.1.1.5.8.1.2SECTION 162.161-2
     162.161-2 Incorporation by reference.
46:6.0.1.1.5.8.1.3SECTION 162.161-3
     162.161-3 Materials.
46:6.0.1.1.5.8.1.4SECTION 162.161-4
     162.161-4 Construction.
46:6.0.1.1.5.8.1.5SECTION 162.161-5
     162.161-5 Instruction manual for design, installation, operation, and maintenance.
46:6.0.1.1.5.8.1.6SECTION 162.161-6
     162.161-6 Tests for approval.
46:6.0.1.1.5.8.1.7SECTION 162.161-7
     162.161-7 Inspections at production.
46:6.0.1.1.5.8.1.8SECTION 162.161-8
     162.161-8 Marking.
46:6.0.1.1.5.8.1.9SECTION 162.161-9
     162.161-9 Procedure for approval.
46:6.0.1.1.5.9SUBPART 162.163
Subpart 162.163 - Portable Foam Applicators
46:6.0.1.1.5.9.1.1SECTION 162.163-1
     162.163-1 Scope.
46:6.0.1.1.5.9.1.2SECTION 162.163-2
     162.163-2 Incorporation by reference.
46:6.0.1.1.5.9.1.3SECTION 162.163-3
     162.163-3 Performance, design, construction, testing, and marking requirements.
46:6.0.1.1.5.9.1.4SECTION 162.163-4
     162.163-4 Approval procedures.
46:6.0.1.1.6PART 163
PART 163 - CONSTRUCTION
46:6.0.1.1.6.1SUBPART 163.001
Subpart 163.001 [Reserved]
46:6.0.1.1.6.2SUBPART 163.002
Subpart 163.002 - Pilot Hoist
46:6.0.1.1.6.2.1.1SECTION 163.002-1
     163.002-1 Scope.
46:6.0.1.1.6.2.1.2SECTION 163.002-3
     163.002-3 Applicable technical regulations.
46:6.0.1.1.6.2.1.3SECTION 163.002-5
     163.002-5 Definitions.
46:6.0.1.1.6.2.1.4SECTION 163.002-7
     163.002-7 Independent laboratory.
46:6.0.1.1.6.2.1.5SECTION 163.002-9
     163.002-9 Approval procedure.
46:6.0.1.1.6.2.1.6SECTION 163.002-11
     163.002-11 Materials.
46:6.0.1.1.6.2.1.7SECTION 163.002-13
     163.002-13 Construction.
46:6.0.1.1.6.2.1.8SECTION 163.002-15
     163.002-15 Performance.
46:6.0.1.1.6.2.1.9SECTION 163.002-17
     163.002-17 Instructions and marking.
46:6.0.1.1.6.2.1.10SECTION 163.002-21
     163.002-21 Approval tests.
46:6.0.1.1.6.2.1.11SECTION 163.002-25
     163.002-25 Marking.
46:6.0.1.1.6.2.1.12SECTION 163.002-27
     163.002-27 Production tests and examination.
46:6.0.1.1.6.3SUBPART 163.003
Subpart 163.003 - Pilot Ladder
46:6.0.1.1.6.3.1.1SECTION 163.003-1
     163.003-1 Scope.
46:6.0.1.1.6.3.1.2SECTION 163.003-3
     163.003-3 ASTM standard.
46:6.0.1.1.6.3.1.3SECTION 163.003-7
     163.003-7 Independent laboratory.
46:6.0.1.1.6.3.1.4SECTION 163.003-9
     163.003-9 Approval procedure.
46:6.0.1.1.6.3.1.5SECTION 163.003-11
     163.003-11 Materials.
46:6.0.1.1.6.3.1.6SECTION 163.003-13
     163.003-13 Construction.
46:6.0.1.1.6.3.1.7SECTION 163.003-15
     163.003-15 Performance.
46:6.0.1.1.6.3.1.8SECTION 163.003-17
     163.003-17 Strength.
46:6.0.1.1.6.3.1.9SECTION 163.003-21
     163.003-21 Approval tests.
46:6.0.1.1.6.3.1.10SECTION 163.003-25
     163.003-25 Marking.
46:6.0.1.1.6.3.1.11SECTION 163.003-27
     163.003-27 Production tests and examination.
46:6.0.1.1.7PART 164
PART 164 - MATERIALS
46:6.0.1.1.7.1SUBPART 164.003
Subpart 164.003 - Kapok, Processed
46:6.0.1.1.7.1.1.1SECTION 164.003-1
     164.003-1 Applicable specifications.
46:6.0.1.1.7.1.1.2SECTION 164.003-2
     164.003-2 Grades.
46:6.0.1.1.7.1.1.3SECTION 164.003-3
     164.003-3 Material and workmanship.
46:6.0.1.1.7.1.1.4SECTION 164.003-4
     164.003-4 Inspections and tests.
46:6.0.1.1.7.1.1.5SECTION 164.003-5
     164.003-5 Procedure for approval.
46:6.0.1.1.7.2SUBPART 164.006
Subpart 164.006 - Deck Coverings for Merchant Vessels
46:6.0.1.1.7.2.1.1SECTION 164.006-1
     164.006-1 Applicable specifications.
46:6.0.1.1.7.2.1.2SECTION 164.006-2
     164.006-2 Grades.
46:6.0.1.1.7.2.1.3SECTION 164.006-3
     164.006-3 Construction, materials, and workmanship.
46:6.0.1.1.7.2.1.4SECTION 164.006-4
     164.006-4 Inspection and testing.
46:6.0.1.1.7.2.1.5SECTION 164.006-5
     164.006-5 Procedure for approval.
46:6.0.1.1.7.2.1.6SECTION 164.006-6
     164.006-6 Alternative materials.
46:6.0.1.1.7.3SUBPART 164.007
Subpart 164.007 - Structural Insulations
46:6.0.1.1.7.3.1.1SECTION 164.007-1
     164.007-1 Applicable specification and referenced material.
46:6.0.1.1.7.3.1.2SECTION 164.007-2
     164.007-2 Purpose.
46:6.0.1.1.7.3.1.3SECTION 164.007-3
     164.007-3 Conditions of approval.
46:6.0.1.1.7.3.1.4SECTION 164.007-4
     164.007-4 Testing procedure.
46:6.0.1.1.7.3.1.5SECTION 164.007-5
     164.007-5 Test requirements.
46:6.0.1.1.7.3.1.6SECTION 164.007-6
     164.007-6 Test report.
46:6.0.1.1.7.3.1.7SECTION 164.007-7
     164.007-7 Analysis of results.
46:6.0.1.1.7.3.1.8SECTION 164.007-8
     164.007-8 Retests.
46:6.0.1.1.7.3.1.9SECTION 164.007-9
     164.007-9 Procedure for approval.
46:6.0.1.1.7.3.1.10SECTION 164.007-10
     164.007-10 Alternative materials.
46:6.0.1.1.7.4SUBPART 164.008
Subpart 164.008 - Bulkhead Panels
46:6.0.1.1.7.4.1.1SECTION 164.008-1
     164.008-1 Applicable specification and reference material.
46:6.0.1.1.7.4.1.2SECTION 164.008-2
     164.008-2 Conditions of approval.
46:6.0.1.1.7.4.1.3SECTION 164.008-3
     164.008-3 Testing procedure.
46:6.0.1.1.7.4.1.4SECTION 164.008-4
     164.008-4 Test requirements.
46:6.0.1.1.7.4.1.5SECTION 164.008-5
     164.008-5 Test report.
46:6.0.1.1.7.4.1.6SECTION 164.008-6
     164.008-6 Retests.
46:6.0.1.1.7.4.1.7SECTION 164.008-7
     164.008-7 Procedure for approval.
46:6.0.1.1.7.4.1.8SECTION 164.008-8
     164.008-8 Alternative materials.
46:6.0.1.1.7.5SUBPART 164.009
Subpart 164.009 - Noncombustible Materials for Merchant Vessels
46:6.0.1.1.7.5.1.1SECTION 164.009-1
     164.009-1 General.
46:6.0.1.1.7.5.1.2SECTION 164.009-3
     164.009-3 Noncombustible materials not requiring specific approval.
46:6.0.1.1.7.5.1.3SECTION 164.009-7
     164.009-7 Contents of application.
46:6.0.1.1.7.5.1.4SECTION 164.009-9
     164.009-9 Procedure for approval.
46:6.0.1.1.7.5.1.5SECTION 164.009-11
     164.009-11 Furnace apparatus.
46:6.0.1.1.7.5.1.6SECTION 164.009-13
     164.009-13 Furnace calibration.
46:6.0.1.1.7.5.1.7SECTION 164.009-15
     164.009-15 Test procedure.
46:6.0.1.1.7.5.1.8SECTION 164.009-17
     164.009-17 Density measurement.
46:6.0.1.1.7.5.1.9SECTION 164.009-19
     164.009-19 Measurement of moisture and volatile matter content.
46:6.0.1.1.7.5.1.10SECTION 164.009-21
     164.009-21 Laboratory report.
46:6.0.1.1.7.5.1.11SECTION 164.009-23
     164.009-23 Factory inspection.
46:6.0.1.1.7.5.1.12SECTION 164.009-25
     164.009-25 Marking.
46:6.0.1.1.7.5.1.13SECTION 164.009-26
     164.009-26 Alternative materials.
46:6.0.1.1.7.6SUBPART 164.012
Subpart 164.012 - Interior Finishes for Merchant Vessels
46:6.0.1.1.7.6.1.1SECTION 164.012-1
     164.012-1 Applicable specifications.
46:6.0.1.1.7.6.1.2SECTION 164.012-5
     164.012-5 Scope.
46:6.0.1.1.7.6.1.3SECTION 164.012-10
     164.012-10 Requirements.
46:6.0.1.1.7.6.1.4SECTION 164.012-11
     164.012-11 Marking.
46:6.0.1.1.7.6.1.5SECTION 164.012-12
     164.012-12 Recognized laboratory.
46:6.0.1.1.7.6.1.6SECTION 164.012-13
     164.012-13 Examinations, tests, and inspections.
46:6.0.1.1.7.6.1.7SECTION 164.012-14
     164.012-14 Procedure for listing and labeling.
46:6.0.1.1.7.6.1.8SECTION 164.012-15
     164.012-15 Termination of listing and labeling.
46:6.0.1.1.7.6.1.9SECTION 164.012-16
     164.012-16 Alternative materials.
46:6.0.1.1.7.7SUBPART 164.013
Subpart 164.013 - Foam, Unicellular Polyethylene (Buoyant, Slab, Slitted Trigonal Pattern)
46:6.0.1.1.7.7.1.1SECTION 164.013-1
     164.013-1 Scope.
46:6.0.1.1.7.7.1.2SECTION 164.013-2
     164.013-2 Incorporation by reference.
46:6.0.1.1.7.7.1.3SECTION 164.013-3
     164.013-3 Material properties and workmanship.
46:6.0.1.1.7.7.1.4SECTION 164.013-4
     164.013-4 Samples submitted for acceptance.
46:6.0.1.1.7.7.1.5SECTION 164.013-5
     164.013-5 Acceptance tests.
46:6.0.1.1.7.7.1.6SECTION 164.013-6
     164.013-6 Production tests, inspections, and marking.
46:6.0.1.1.7.7.1.7SECTION 164.013-7
     164.013-7 Marking.
46:6.0.1.1.7.8SUBPART 164.015
Subpart 164.015 - Plastic Foam, Unicellular, Buoyant, Sheet and Molded Shape
46:6.0.1.1.7.8.1.1SECTION 164.015-1
     164.015-1 Applicable specifications and standards.
46:6.0.1.1.7.8.1.2SECTION 164.015-2
     164.015-2 Types.
46:6.0.1.1.7.8.1.3SECTION 164.015-3
     164.015-3 Material and workmanship.
46:6.0.1.1.7.8.1.4SECTION 164.015-4
     164.015-4 Inspections and tests.
46:6.0.1.1.7.8.1.5SECTION 164.015-5
     164.015-5 Procedure for acceptance.
46:6.0.1.1.7.9SUBPART 164.018
Subpart 164.018 - Retroreflective Material for Lifesaving Equipment
46:6.0.1.1.7.9.1.1SECTION 164.018-1
     164.018-1 Scope.
46:6.0.1.1.7.9.1.2SECTION 164.018-3
     164.018-3 Classification.
46:6.0.1.1.7.9.1.3SECTION 164.018-5
     164.018-5 Specifications and standards incorporated by reference.
46:6.0.1.1.7.9.1.4SECTION 164.018-7
     164.018-7 Approval procedures.
46:6.0.1.1.7.9.1.5SECTION 164.018-9
     164.018-9 Design requirements.
46:6.0.1.1.7.9.1.6SECTION 164.018-11
     164.018-11 Approval tests.
46:6.0.1.1.7.9.1.7SECTION 164.018-13
     164.018-13 Production inspections.
46:6.0.1.1.7.10SUBPART 164.019
Subpart 164.019 - Personal Flotation Device Components
46:6.0.1.1.7.10.1.1SECTION 164.019-1
     164.019-1 Scope.
46:6.0.1.1.7.10.1.2SECTION 164.019-3
     164.019-3 Definitions.
46:6.0.1.1.7.10.1.3SECTION 164.019-4
     164.019-4 Component requirements.
46:6.0.1.1.7.10.1.4SECTION 164.019-5
     164.019-5 Standard components; acceptance criteria and procedures.
46:6.0.1.1.7.10.1.5SECTION 164.019-7
     164.019-7 Non-standard components; acceptance criteria and procedures.
46:6.0.1.1.7.10.1.6SECTION 164.019-9
     164.019-9 Procedure for acceptance of revisions of design, process, or materials.
46:6.0.1.1.7.10.1.7SECTION 164.019-11
     164.019-11 Certification (affidavits).
46:6.0.1.1.7.10.1.8SECTION 164.019-13
     164.019-13 Production quality control requirements.
46:6.0.1.1.7.10.1.9SECTION 164.019-15
     164.019-15 Component manufacturer records.
46:6.0.1.1.7.10.1.10SECTION 164.019-17
     164.019-17 Recognized laboratory.
46:6.0.1.1.7.11SUBPART 164.023
Subpart 164.023 - Thread for Personal Flotation Devices
46:6.0.1.1.7.11.1.1SECTION 164.023-1
     164.023-1 Scope.
46:6.0.1.1.7.11.1.2SECTION 164.023-3
     164.023-3 Specifications and standards incorporated by reference.
46:6.0.1.1.7.11.1.3SECTION 164.023-5
     164.023-5 Performance; standard thread.
46:6.0.1.1.7.11.1.4SECTION 164.023-7
     164.023-7 Performance; non-standard thread.
46:6.0.1.1.7.11.1.5SECTION 164.023-9
     164.023-9 Samples submitted for acceptance.
46:6.0.1.1.7.11.1.6SECTION 164.023-11
     164.023-11 Acceptance tests.
46:6.0.1.1.7.11.1.7SECTION 164.023-13
     164.023-13 Production tests and inspections.
46:6.0.1.1.7.11.1.8SECTION 164.023-15
     164.023-15 Marking.
46:6.0.1.1.7.12SUBPART 164.105
Subpart 164.105 - Deck Assemblies (A-60) For SOLAS Vessels
46:6.0.1.1.7.12.1.1SECTION 164.105-1
     164.105-1 Scope.
46:6.0.1.1.7.12.1.2SECTION 164.105-2
     164.105-2 Incorporation by reference.
46:6.0.1.1.7.12.1.3SECTION 164.105-3
     164.105-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.12.1.4SECTION 164.105-4
     164.105-4 Approval procedures.
46:6.0.1.1.7.13SUBPART 164.106
Subpart 164.106 - Primary Deck Coverings for SOLAS Vessels
46:6.0.1.1.7.13.1.1SECTION 164.106-1
     164.106-1 Scope
46:6.0.1.1.7.13.1.2SECTION 164.106-2
     164.106-2 Incorporation by reference.
46:6.0.1.1.7.13.1.3SECTION 164.106-3
     164.106-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.13.1.4SECTION 164.106-4
     164.106-4 Approval procedures.
46:6.0.1.1.7.14SUBPART 164.107
Subpart 164.107 - Structural Insulation (A-60) for SOLAS Vessels
46:6.0.1.1.7.14.1.1SECTION 164.107-1
     164.107-1 Scope.
46:6.0.1.1.7.14.1.2SECTION 164.107-2
     164.107-2 Incorporation by reference.
46:6.0.1.1.7.14.1.3SECTION 164.107-3
     164.107-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.14.1.4SECTION 164.107-4
     164.107-4 Approval procedures.
46:6.0.1.1.7.15SUBPART 164.108
Subpart 164.108 - Bulkheads (B-0 and B-15) for SOLAS Vessels
46:6.0.1.1.7.15.1.1SECTION 164.108-1
     164.108-1 Scope.
46:6.0.1.1.7.15.1.2SECTION 164.108-2
     164.108-2 Incorporation by reference.
46:6.0.1.1.7.15.1.3SECTION 164.108-3
     164.108-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.15.1.4SECTION 164.108-4
     164.108-4 Approval procedures.
46:6.0.1.1.7.16SUBPART 164.109
Subpart 164.109 - Non-combustible Materials (SOLAS)
46:6.0.1.1.7.16.1.1SECTION 164.109-1
     164.109-1 Scope.
46:6.0.1.1.7.16.1.2SECTION 164.109-2
     164.109-2 Incorporation by reference.
46:6.0.1.1.7.16.1.3SECTION 164.109-3
     164.109-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.16.1.4SECTION 164.109-4
     164.109-4 Approval procedures.
46:6.0.1.1.7.17SUBPART 164.110
Subpart 164.110 - Continuous Ceilings (B-0 and B-15) (SOLAS)
46:6.0.1.1.7.17.1.1SECTION 164.110-1
     164.110-1 Scope.
46:6.0.1.1.7.17.1.2SECTION 164.110-2
     164.110-2 Incorporation by reference.
46:6.0.1.1.7.17.1.3SECTION 164.110-3
     164.110-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.17.1.4SECTION 164.110-4
     164.110-4 Approval procedures.
46:6.0.1.1.7.18SUBPART 164.111
Subpart 164.111 - Draperies, Curtains, and Other Suspended Textiles
46:6.0.1.1.7.18.1.1SECTION 164.111-1
     164.111-1 Scope.
46:6.0.1.1.7.18.1.2SECTION 164.111-2
     164.111-2 Incorporation by reference.
46:6.0.1.1.7.18.1.3SECTION 164.111-3
     164.111-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.18.1.4SECTION 164.111-4
     164.111-4 Approval procedures.
46:6.0.1.1.7.19SUBPART 164.112
Subpart 164.112 - Interior Finish (Bulkheads and Ceiling Finishes) (SOLAS)
46:6.0.1.1.7.19.1.1SECTION 164.112-1
     164.112-1 Scope.
46:6.0.1.1.7.19.1.2SECTION 164.112-2
     164.112-2 Incorporation by reference.
46:6.0.1.1.7.19.1.3SECTION 164.112-3
     164.112-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.19.1.4SECTION 164.112-4
     164.112-4 Approval procedures.
46:6.0.1.1.7.20SUBPART 164.117
Subpart 164.117 - Floor Finish (SOLAS)
46:6.0.1.1.7.20.1.1SECTION 164.117-1
     164.117-1 Scope.
46:6.0.1.1.7.20.1.2SECTION 164.117-2
     164.117-2 Incorporation by reference.
46:6.0.1.1.7.20.1.3SECTION 164.117-3
     164.117-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.20.1.4SECTION 164.117-4
     164.117-4 Approval procedures.
46:6.0.1.1.7.21SUBPART 164.120
Subpart 164.120 - Fire Retardant Resins for Lifeboats and Rescue Boats
46:6.0.1.1.7.21.1.1SECTION 164.120-1
     164.120-1 Scope.
46:6.0.1.1.7.21.1.2SECTION 164.120-3
     164.120-3 Definitions.
46:6.0.1.1.7.21.1.3SECTION 164.120-5
     164.120-5 Incorporation by reference.
46:6.0.1.1.7.21.1.4SECTION 164.120-7
     164.120-7 Acceptance criteria.
46:6.0.1.1.7.21.1.5SECTION 164.120-9
     164.120-9 Procedure for acceptance.
46:6.0.1.1.7.21.1.6SECTION 164.120-11
     164.120-11 Production quality control requirements.
46:6.0.1.1.7.21.1.7SECTION 164.120-13
     164.120-13 Marking, labeling, and instructions for use.
46:6.0.1.1.7.21.1.8SECTION 164.120-15
     164.120-15 Procedure for acceptance of material change.
46:6.0.1.1.7.22SUBPART 164.136
Subpart 164.136 - Fire Doors
46:6.0.1.1.7.22.1.1SECTION 164.136-1
     164.136-1 Scope.
46:6.0.1.1.7.22.1.2SECTION 164.136-2
     164.136-2 Incorporation by reference.
46:6.0.1.1.7.22.1.3SECTION 164.136-3
     164.136-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.22.1.4SECTION 164.136-4
     164.136-4 Approval procedures.
46:6.0.1.1.7.23SUBPART 164.137
Subpart 164.137 - Windows
46:6.0.1.1.7.23.1.1SECTION 164.137-1
     164.137-1 Scope.
46:6.0.1.1.7.23.1.2SECTION 164.137-2
     164.137-2 Incorporation by reference.
46:6.0.1.1.7.23.1.3SECTION 164.137-3
     164.137-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.23.1.4SECTION 164.137-4
     164.137-4 Approval procedures.
46:6.0.1.1.7.24SUBPART 164.138
Subpart 164.138 - Fire Stops (Penetration Seals)
46:6.0.1.1.7.24.1.1SECTION 164.138-1
     164.138-1 Scope.
46:6.0.1.1.7.24.1.2SECTION 164.138-2
     164.138-2 Incorporation by reference.
46:6.0.1.1.7.24.1.3SECTION 164.138-3
     164.138-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.24.1.4SECTION 164.138-4
     164.138-4 Approval procedures.
46:6.0.1.1.7.25SUBPART 164.139
Subpart 164.139-Dampers
46:6.0.1.1.7.25.1.1SECTION 164.139-1
     164.139-1 Scope.
46:6.0.1.1.7.25.1.2SECTION 164.139-2
     164.139-2 Incorporation by reference.
46:6.0.1.1.7.25.1.3SECTION 164.139-3
     164.139-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.25.1.4SECTION 164.139-4
     164.139-4 Approval procedures.
46:6.0.1.1.7.26SUBPART 164.141
Subpart 164.141 - Plastic Pipes
46:6.0.1.1.7.26.1.1SECTION 164.141-1
     164.141-1 Scope.
46:6.0.1.1.7.26.1.2SECTION 164.141-2
     164.141-2 Incorporation by reference.
46:6.0.1.1.7.26.1.3SECTION 164.141-3
     164.141-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.26.1.4SECTION 164.141-4
     164.141-4 Approval procedures.
46:6.0.1.1.7.27SUBPART 164.142
Subpart 164.142 - Bedding Components
46:6.0.1.1.7.27.1.1SECTION 164.142-1
     164.142-1 Scope.
46:6.0.1.1.7.27.1.2SECTION 164.142-2
     164.142-2 Incorporation by reference.
46:6.0.1.1.7.27.1.3SECTION 164.142-3
     164.142-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.27.1.4SECTION 164.142-4
     164.142-4 Approval procedures.
46:6.0.1.1.7.28SUBPART 164.144
Subpart 164.144 - Upholstered Furniture
46:6.0.1.1.7.28.1.1SECTION 164.144-1
     164.144-1 Scope.
46:6.0.1.1.7.28.1.2SECTION 164.144-2
     164.144-2 Incorporation by reference.
46:6.0.1.1.7.28.1.3SECTION 164.144-3
     164.144-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.28.1.4SECTION 164.144-4
     164.144-4 Approval procedures.
46:6.0.1.1.7.29SUBPART 164.146
Subpart 164.146 - Fire Door Control System (SOLAS)
46:6.0.1.1.7.29.1.1SECTION 164.146-1
     164.146-1 Scope.
46:6.0.1.1.7.29.1.2SECTION 164.146-2
     164.146-2 Incorporation by reference.
46:6.0.1.1.7.29.1.3SECTION 164.146-3
     164.146-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.29.1.4SECTION 164.146-4
     164.146-4 Approval procedures.
46:6.0.1.1.7.30SUBPART 164.201
Subpart 164.201 - Fire-resisting Materials for High-speed Craft
46:6.0.1.1.7.30.1.1SECTION 164.201-1
     164.201-1 Scope.
46:6.0.1.1.7.30.1.2SECTION 164.201-2
     164.201-2 Incorporation by reference.
46:6.0.1.1.7.30.1.3SECTION 164.201-3
     164.201-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.30.1.4SECTION 164.201-4
     164.201-4 Approval procedures.
46:6.0.1.1.7.31SUBPART 164.207
Subpart 164.207 - Fire-resisting Divisions for High-speed Craft
46:6.0.1.1.7.31.1.1SECTION 164.207-1
     164.207-1 Scope.
46:6.0.1.1.7.31.1.2SECTION 164.207-2
     164.207-2 Incorporation by reference.
46:6.0.1.1.7.31.1.3SECTION 164.207-3
     164.207-3 Testing, marking, and inspection requirements.
46:6.0.1.1.7.31.1.4SECTION 164.207-4
     164.207-4 Approval procedures.
46:6.0.1.1.8PART 165
PART 165 [RESERVED]