46:6.0.1.1.5.1 | SUBPART 162.017
| Subpart 162.017 - General Provisions; Valves, Pressure-Vacuum Relief, for Tank Vessels | |
46:6.0.1.1.5.1.1.1 | SECTION 162.017-1
| 162.017-1 Preemptive effect; incorporation by reference. | |
46:6.0.1.1.5.1.1.2 | SECTION 162.017-2
| 162.017-2 Type. | |
46:6.0.1.1.5.1.1.3 | SECTION 162.017-3
| 162.017-3 Materials, construction, and workmanship. | |
46:6.0.1.1.5.1.1.4 | SECTION 162.017-4
| 162.017-4 Inspections and testing. | |
46:6.0.1.1.5.1.1.5 | SECTION 162.017-5
| 162.017-5 Marking. | |
46:6.0.1.1.5.1.1.6 | SECTION 162.017-6
| 162.017-6 Procedure for approval. | |
46:6.0.1.1.5.2 | SUBPART 162.018
| Subpart 162.018 - Safety Relief Valves, Liquefied Compressed Gas | |
46:6.0.1.1.5.2.1.1 | SECTION 162.018-1
| 162.018-1 Applicable specifications, and referenced material. | |
46:6.0.1.1.5.2.1.2 | SECTION 162.018-2
| 162.018-2 Scope. | |
46:6.0.1.1.5.2.1.3 | SECTION 162.018-3
| 162.018-3 Materials. | |
46:6.0.1.1.5.2.1.4 | SECTION 162.018-4
| 162.018-4 Construction and workmanship. | |
46:6.0.1.1.5.2.1.5 | SECTION 162.018-5
| 162.018-5 Blow-down adjustment and popping tolerance. | |
46:6.0.1.1.5.2.1.6 | SECTION 162.018-6
| 162.018-6 Marking. | |
46:6.0.1.1.5.2.1.7 | SECTION 162.018-7
| 162.018-7 Flow rating tests. | |
46:6.0.1.1.5.2.1.8 | SECTION 162.018-8
| 162.018-8 Procedure for approval. | |
46:6.0.1.1.5.3 | SUBPART 162.027
| Subpart 162.027 - Combination Firehose Nozzles | |
46:6.0.1.1.5.3.1.1 | SECTION 162.027-1
| 162.027-1 Scope. | |
46:6.0.1.1.5.3.1.2 | SECTION 162.027-2
| 162.027-2 Incorporation by reference. | |
46:6.0.1.1.5.3.1.3 | SECTION 162.027-3
| 162.027-3 Design, construction, testing, and marking requirements. | |
46:6.0.1.1.5.3.1.4 | SECTION 162.027-4
| 162.027-4 Approval procedures. | |
46:6.0.1.1.5.4 | SUBPART 162.028
| Subpart 162.028 - Extinguishers, Fire, Portable, Marine Type | |
46:6.0.1.1.5.4.1.1 | SECTION 162.028-1
| 162.028-1 Incorporation by reference. | |
46:6.0.1.1.5.4.1.2 | SECTION 162.028-2
| 162.028-2 Classification. | |
46:6.0.1.1.5.4.1.3 | SECTION 162.028-3
| 162.028-3 Requirements. | |
46:6.0.1.1.5.4.1.4 | SECTION 162.028-4
| 162.028-4 Marine type label. | |
46:6.0.1.1.5.4.1.5 | SECTION 162.028-5
| 162.028-5 Recognized laboratories. | |
46:6.0.1.1.5.4.1.6 | SECTION 162.028-6
| 162.028-6 Examinations, tests, and inspections. | |
46:6.0.1.1.5.4.1.7 | SECTION 162.028-7
| 162.028-7 Procedure for listing and labeling. | |
46:6.0.1.1.5.4.1.8 | SECTION 162.028-8
| 162.028-8 Termination of listing or labeling. | |
46:6.0.1.1.5.5 | SUBPART 162.039
| Subpart 162.039 - Extinguishers, Fire, Semi-portable, Marine Type | |
46:6.0.1.1.5.5.1.1 | SECTION 162.039-1
| 162.039-1 Incorporation by reference. | |
46:6.0.1.1.5.5.1.2 | SECTION 162.039-2
| 162.039-2 Classification. | |
46:6.0.1.1.5.5.1.3 | SECTION 162.039-3
| 162.039-3 Requirements. | |
46:6.0.1.1.5.5.1.4 | SECTION 162.039-4
| 162.039-4 Marine type label. | |
46:6.0.1.1.5.5.1.5 | SECTION 162.039-5
| 162.039-5 Recognized laboratories. | |
46:6.0.1.1.5.5.1.6 | SECTION 162.039-6
| 162.039-6 Examinations, tests, and inspections. | |
46:6.0.1.1.5.5.1.7 | SECTION 162.039-7
| 162.039-7 Procedure for listing and labeling. | |
46:6.0.1.1.5.5.1.8 | SECTION 162.039-8
| 162.039-8 Termination of listing or labeling. | |
46:6.0.1.1.5.6 | SUBPART 162.050
| Subpart 162.050 - Pollution Prevention Equipment | |
46:6.0.1.1.5.6.1.1 | SECTION 162.050-1
| 162.050-1 Scope. | |
46:6.0.1.1.5.6.1.2 | SECTION 162.050-3
| 162.050-3 Definitions. | |
46:6.0.1.1.5.6.1.3 | SECTION 162.050-4
| 162.050-4 Incorporation by reference: Where can I get a copy of the publications mentioned in this part | |
46:6.0.1.1.5.6.1.4 | SECTION 162.050-5
| 162.050-5 Contents of application. | |
46:6.0.1.1.5.6.1.5 | SECTION 162.050-7
| 162.050-7 Approval procedures. | |
46:6.0.1.1.5.6.1.6 | SECTION 162.050-9
| 162.050-9 Test report. | |
46:6.0.1.1.5.6.1.7 | SECTION 162.050-11
| 162.050-11 Marking. | |
46:6.0.1.1.5.6.1.8 | SECTION 162.050-13
| 162.050-13 Factory production and inspection. | |
46:6.0.1.1.5.6.1.9 | SECTION 162.050-15
| 162.050-15 Designation of facilities. | |
46:6.0.1.1.5.6.1.10 | SECTION 162.050-17
| 162.050-17 Separator test rig. | |
46:6.0.1.1.5.6.1.11 | SECTION 162.050-19
| 162.050-19 Oil content meter and bilge alarm test rig. | |
46:6.0.1.1.5.6.1.12 | SECTION 162.050-20
| 162.050-20 Separator and bilge alarm test fluids. | |
46:6.0.1.1.5.6.1.13 | SECTION 162.050-21
| 162.050-21 Separator: Design specification. | |
46:6.0.1.1.5.6.1.14 | SECTION 162.050-23
| 162.050-23 Separator: Approval tests. | |
46:6.0.1.1.5.6.1.15 | SECTION 162.050-25
| 162.050-25 Cargo monitor: Design specification. | |
46:6.0.1.1.5.6.1.16 | SECTION 162.050-27
| 162.050-27 Oil content meter: Approval tests. | |
46:6.0.1.1.5.6.1.17 | SECTION 162.050-33
| 162.050-33 Bilge alarm: Design specification. | |
46:6.0.1.1.5.6.1.18 | SECTION 162.050-35
| 162.050-35 Bilge alarm: Approval tests. | |
46:6.0.1.1.5.6.1.19 | SECTION 162.050-37
| 162.050-37 Vibration test. | |
46:6.0.1.1.5.6.1.20 | SECTION 162.050-39
| 162.050-39 Measurement of oil content. | |
46:6.0.1.1.5.7 | SUBPART 162.060
| Subpart 162.060 - Ballast Water Management Systems | |
46:6.0.1.1.5.7.1.1 | SECTION 162.060-1
| 162.060-1 Purpose and scope. | |
46:6.0.1.1.5.7.1.2 | SECTION 162.060-3
| 162.060-3 Definitions. | |
46:6.0.1.1.5.7.1.3 | SECTION 162.060-5
| 162.060-5 Incorporation by reference. | |
46:6.0.1.1.5.7.1.4 | SECTION 162.060-10
| 162.060-10 Approval procedures. | |
46:6.0.1.1.5.7.1.5 | SECTION 162.060-12
| 162.060-12 Use and acceptance of existing test data. | |
46:6.0.1.1.5.7.1.6 | SECTION 162.060-14
| 162.060-14 Information requirements for the ballast water management system (BWMS) application. | |
46:6.0.1.1.5.7.1.7 | SECTION 162.060-16
| 162.060-16 Changes to an approved ballast water management system (BWMS). | |
46:6.0.1.1.5.7.1.8 | SECTION 162.060-18
| 162.060-18 Suspension, withdrawal, or termination of approval. | |
46:6.0.1.1.5.7.1.9 | SECTION 162.060-20
| 162.060-20 Design and construction requirements. | |
46:6.0.1.1.5.7.1.10 | SECTION 162.060-22
| 162.060-22 Marking requirements. | |
46:6.0.1.1.5.7.1.11 | SECTION 162.060-24
| 162.060-24 Test Plan requirements. | |
46:6.0.1.1.5.7.1.12 | SECTION 162.060-26
| 162.060-26 Land-based testing requirements. | |
46:6.0.1.1.5.7.1.13 | SECTION 162.060-28
| 162.060-28 Shipboard testing requirements. | |
46:6.0.1.1.5.7.1.14 | SECTION 162.060-30
| 162.060-30 Testing requirements for ballast water management system (BWMS) components. | |
46:6.0.1.1.5.7.1.15 | SECTION 162.060-32
| 162.060-32 Testing and evaluation requirements for active substances, preparations, and relevant chemicals. | |
46:6.0.1.1.5.7.1.16 | SECTION 162.060-34
| 162.060-34 Test Report requirements. | |
46:6.0.1.1.5.7.1.17 | SECTION 162.060-36
| 162.060-36 Quality Assurance Project Plan (QAPP) requirements. | |
46:6.0.1.1.5.7.1.18 | SECTION 162.060-38
| 162.060-38 Operation, Maintenance, and Safety Manual (OMSM). | |
46:6.0.1.1.5.7.1.19 | SECTION 162.060-40
| 162.060-40 Requirements for Independent Laboratories (ILs). | |
46:6.0.1.1.5.7.1.20 | SECTION 162.060-42
| 162.060-42 Responsibilities for Independent Laboratories (ILs). | |
46:6.0.1.1.5.8 | SUBPART 162.161
| Subpart 162.161 - Fixed Clean Agent Fire Extinguishing Systems | |
46:6.0.1.1.5.8.1.1 | SECTION 162.161-1
| 162.161-1 Scope. | |
46:6.0.1.1.5.8.1.2 | SECTION 162.161-2
| 162.161-2 Incorporation by reference. | |
46:6.0.1.1.5.8.1.3 | SECTION 162.161-3
| 162.161-3 Materials. | |
46:6.0.1.1.5.8.1.4 | SECTION 162.161-4
| 162.161-4 Construction. | |
46:6.0.1.1.5.8.1.5 | SECTION 162.161-5
| 162.161-5 Instruction manual for design, installation, operation, and maintenance. | |
46:6.0.1.1.5.8.1.6 | SECTION 162.161-6
| 162.161-6 Tests for approval. | |
46:6.0.1.1.5.8.1.7 | SECTION 162.161-7
| 162.161-7 Inspections at production. | |
46:6.0.1.1.5.8.1.8 | SECTION 162.161-8
| 162.161-8 Marking. | |
46:6.0.1.1.5.8.1.9 | SECTION 162.161-9
| 162.161-9 Procedure for approval. | |
46:6.0.1.1.5.9 | SUBPART 162.163
| Subpart 162.163 - Portable Foam Applicators | |
46:6.0.1.1.5.9.1.1 | SECTION 162.163-1
| 162.163-1 Scope. | |
46:6.0.1.1.5.9.1.2 | SECTION 162.163-2
| 162.163-2 Incorporation by reference. | |
46:6.0.1.1.5.9.1.3 | SECTION 162.163-3
| 162.163-3 Performance, design, construction, testing, and marking requirements. | |
46:6.0.1.1.5.9.1.4 | SECTION 162.163-4
| 162.163-4 Approval procedures. | |