PART 236—RULES, STANDARDS, AND INSTRUCTIONS GOVERNING THE INSTALLATION, INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES
Contents
-
236.0
§ 236.0 Applicability, minimum requirements, and penalties. -
A
Subpart A—Rules and Instructions: All Systems Subject groups General–Wires and Cables -
Appendix A to Part 236
Appendix A to Part 236 [Reserved] -
Appendix B to Part 236
Appendix B to Part 236—Risk Assessment Criteria -
Appendix C to Part 236
Appendix C to Part 236—Safety Assurance Criteria and Processes -
Appendix D to Part 236
Appendix D to Part 236—Independent Review of Verification and Validation -
Appendix E to Part 236
Appendix E to Part 236—Human-Machine Interface (HMI) Design -
Appendix F to Part 236
Appendix F to Part 236—Minimum Requirements of FRA Directed Independent Third-Party Assessment of PTC System Safety Verification and Validation -
B
Subpart B—Automatic Block Signal Systems Subject group Standards -
C
Subpart C—Interlocking Subject groups Inspection and Tests–Standards -
D
Subpart D—Traffic Control Systems Subject groups Inspection and Tests–Standards -
E
Subpart E—Automatic Train Stop, Train Control and Cab Signal Systems Subject groups Inspection and Tests; Locomotive–Standards -
F
Subpart F—Dragging Equipment and Slide Detectors and Other Similar Protective Devices Subject group Standards -
G
Subpart G—Definitions Sections 236.700–236.838 -
H
Subpart H—Standards for Processor-Based Signal and Train Control Systems Sections 236.901–236.929 -
I
Subpart I—Positive Train Control Systems Sections 236.1001–236.1049