Subpart H—Corrosion Control
Sections
Section numbering in the official eCFR can be non-consecutive. Omitted section numbers are not treated here as reserved unless the source explicitly labels them that way.
-
195.551
§ 195.551 What do the regulations in this subpart cover? -
195.553
§ 195.553 What special definitions apply to this subpart? -
195.555
§ 195.555 What are the qualifications for supervisors? -
195.557
§ 195.557 Which pipelines must have coating for external corrosion control? -
195.559
§ 195.559 What coating material may I use for external corrosion control? -
195.561
§ 195.561 When must I inspect pipe coating used for external corrosion control? -
195.563
§ 195.563 Which pipelines must have cathodic protection? -
195.565
§ 195.565 How do I install cathodic protection on breakout tanks? -
195.567
§ 195.567 Which pipelines must have test leads and what must I do to install and maintain the leads? -
195.569
§ 195.569 Do I have to examine exposed portions of buried pipelines? -
195.571
§ 195.571 What criteria must I use to determine the adequacy of cathodic protection? -
195.573
§ 195.573 What must I do to monitor external corrosion control? -
195.575
§ 195.575 Which facilities must I electrically isolate and what inspections, tests, and safeguards are required? -
195.577
§ 195.577 What must I do to alleviate interference currents? -
195.579
§ 195.579 What must I do to mitigate internal corrosion? -
195.581
§ 195.581 Which pipelines must I protect against atmospheric corrosion and what coating material may I use? -
195.583
§ 195.583 What must I do to monitor atmospheric corrosion control? -
195.585
§ 195.585 What must I do to correct corroded pipe? -
195.587
§ 195.587 What methods are available to determine the strength of corroded pipe? -
195.588
§ 195.588 What standards apply to direct assessment? -
195.589
§ 195.589 What corrosion control information do I have to maintain? -
195.591
§ 195.591 In-Line inspection of pipelines.