Title 40

PART 53 SUBPART F

Subpart F - Procedures for Testing Performance Characteristics of Class II Equivalent Methods for PM 2.5 Source:62 FR 38814, July 18, 1997, unless otherwise noted.

40:6.0.1.1.1.6.1.1SECTION 53.60
   53.60 General provisions.
40:6.0.1.1.1.6.1.2SECTION 53.61
   53.61 Test conditions.
40:6.0.1.1.1.6.1.3SECTION 53.62
   53.62 Test procedure: Full wind tunnel test.
40:6.0.1.1.1.6.1.4SECTION 53.63
   53.63 Test procedure: Wind tunnel inlet aspiration test.
40:6.0.1.1.1.6.1.5SECTION 53.64
   53.64 Test procedure: Static fractionator test.
40:6.0.1.1.1.6.1.6SECTION 53.65
   53.65 Test procedure: Loading test.
40:6.0.1.1.1.6.1.7SECTION 53.66
   53.66 Test procedure: Volatility test.
40:6.0.1.1.1.6.1.8.24APPENDIX
   Table F-1 to Subpart F of Part 53 - Performance Specifications for PM 2.5 Class II Equivalent Samplers
40:6.0.1.1.1.6.1.8.25APPENDIX
   Table F-2 to Subpart F of Part 53 - Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
40:6.0.1.1.1.6.1.8.26APPENDIX
   Table F-3 to Subpart F of Part 53 - Critical Parameters of Idealized Ambient Particle Size Distributions
40:6.0.1.1.1.6.1.8.27APPENDIX
   Table F-4 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Coarse Aerosol Size Distribution
40:6.0.1.1.1.6.1.8.28APPENDIX
   Table F-5 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized “Typical” Coarse Aerosol Size Distribution
40:6.0.1.1.1.6.1.8.29APPENDIX
   Table F-6 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM 2.5 for Idealized Fine Aerosol Size Distribution
40:6.0.1.1.1.6.1.8.30APPENDIX
   Figure F-1 to Subpart F of Part 53 - Designation Testing Checklist
40:6.0.1.1.1.6.1.8.31APPENDIX Appendix A
   Appendix A to Subpart F of Part 53 - References