Subpart E—Procedures for Testing Physical (Design) and Performance Characteristics of Reference Methods and Class I and Class II Equivalent Methods for PM _2.5 or PM _10-2.5

1. CFR
2. ›
3. Title 40
4. ›
5. Chapter I
6. ›
7. Part 53
8. ›
9. Subpart E

Contents

• 53.50
  § 53.50 General provisions.
• 53.51
  § 53.51 Demonstration of compliance with design specifications and manufacturing and test requirements.
• 53.52
  § 53.52 Leak check test.
• 53.53
  § 53.53 Test for flow rate accuracy, regulation, measurement accuracy, and cut-off.
• 53.54
  § 53.54 Test for proper sampler operation following power interruptions.
• 53.55
  § 53.55 Test for effect of variations in power line voltage and ambient temperature.
• 53.56
  § 53.56 Test for effect of variations in ambient pressure.
• 53.57
  § 53.57 Test for filter temperature control during sampling and post-sampling periods.
• 53.58
  § 53.58 Operational field precision and blank test.
• 53.59
  § 53.59 Aerosol transport test for Class I equivalent method samplers.
• Appendix A to Subpart E of Part 53
  Appendix A to Subpart E of Part 53—References
• Figure E-1 to Subpart E of Part 53
  Figure E-1 to Subpart E of Part 53—Designation Testing Checklist
• Table E-1 to Subpart E of Part 53
  Table E-1 to Subpart E of Part 53—Summary of Test Requirements for Reference and Class I Equivalent Methods for PM _2.5 and PM _10-2.5
• Table E-2 to Subpart E of Part 53
  Table E-2 to Subpart E of Part 53—Spectral Energy Distribution and Permitted Tolerance for Conducting Radiative Tests