| 7:2.1.1.1.12.2.233.1 | SECTION 42.103
| 42.103 Purpose and scope. | |
| 7:2.1.1.1.12.2.233.2 | SECTION 42.104
| 42.104 Sampling plans and defects. | |
| 7:2.1.1.1.12.2.233.3 | SECTION 42.105
| 42.105 Basis for selection of sample. | |
| 7:2.1.1.1.12.2.233.4 | SECTION 42.106
| 42.106 Classifying and recording defects. | |
| 7:2.1.1.1.12.2.233.5 | SECTION 42.107
| 42.107 Lot acceptance criteria. | |
| 7:2.1.1.1.12.2.233.6 | SECTION 42.108
| 42.108 Normal, tightened, or reduced inspection. | |
| 7:2.1.1.1.12.2.233.7 | SECTION 42.109
| 42.109 Sampling plans for normal condition of container inspection, Tables I and I-A. | |
| 7:2.1.1.1.12.2.233.8 | SECTION 42.110
| 42.110 Sampling plans for tightened condition of container inspection; Tables II and II-A. | |
| 7:2.1.1.1.12.2.233.9 | SECTION 42.111
| 42.111 Sampling plans for reduced condition of container inspection, Tables III and III-A; and limit number for reduced inspection, Table III-B. | |
| 7:2.1.1.1.12.2.233.10 | SECTION 42.112
| 42.112 Defects of containers: Tables IV, V, VI, VII, VIII, IX, and X. | |
| 7:2.1.1.1.12.2.233.11 | SECTION 42.113
| 42.113 Defects of label, marking, or code. | |
| 7:2.1.1.1.12.2.233.12 | SECTION 42.114
| 42.114 Procedures for evaluating interior container defects. | |