Title 46

PART 54

Part 54 - Pressure Vessels

PART 54 - PRESSURE VESSELS Authority:33 U.S.C. 1509; 43 U.S.C. 1333; 46 U.S.C. 3306, 3703; E.O. 12234, 45 FR 58801, 3 CFR, 1980 Comp., p. 277; Department of Homeland Security Delegation No. 0170.1. Source:CGFR 68-82, 33 FR 18828, Dec. 18, 1968, unless otherwise noted.

46:2.0.1.2.12.1SUBPART 54.01
Subpart 54.01 - General Requirements
46:2.0.1.2.12.1.1.1SECTION 54.01-1
   54.01-1 Incorporation by reference.
46:2.0.1.2.12.1.1.2SECTION 54.01-2
   54.01-2 Adoption of division 1 of section VIII of the ASME Boiler and Pressure Vessel Code.
46:2.0.1.2.12.1.1.3SECTION 54.01-5
   54.01-5 Scope (modifies U-1 and U-2).
46:2.0.1.2.12.1.1.4SECTION 54.01-10
   54.01-10 Steam-generating pressure vessels (modifies U-1(g)).
46:2.0.1.2.12.1.1.5SECTION 54.01-15
   54.01-15 Exemptions from shop inspection and plan approval (modifiesU-1(c)(2)).
46:2.0.1.2.12.1.1.6SECTION 54.01-17
   54.01-17 Pressure vessel for human occupancy (PVHO).
46:2.0.1.2.12.1.1.7SECTION 54.01-18
   54.01-18 Plan approval.
46:2.0.1.2.12.1.1.8SECTION 54.01-25
   54.01-25 Miscellaneous pressure components (modifies UG-11).
46:2.0.1.2.12.1.1.9SECTION 54.01-30
   54.01-30 Loadings (modifies UG-22).
46:2.0.1.2.12.1.1.10SECTION 54.01-35
   54.01-35 Corrosion (modifies UG-25).
46:2.0.1.2.12.1.1.11SECTION 54.01-40
   54.01-40 External pressure (modifies UG-28).
46:2.0.1.2.12.2SUBPART 54.03
Subpart 54.03 - Low Temperature Operation
46:2.0.1.2.12.2.1.1SECTION 54.03-1
   54.03-1 Scope.
46:2.0.1.2.12.2.1.2SECTION 54.03-5
   54.03-5 General.
46:2.0.1.2.12.3SUBPART 54.05
Subpart 54.05 - Toughness Tests
46:2.0.1.2.12.3.1.1SECTION 54.05-1
   54.05-1 Scope (replaces UG-84).
46:2.0.1.2.12.3.1.2SECTION 54.05-3
   54.05-3 Tests required.
46:2.0.1.2.12.3.1.3SECTION 54.05-5
   54.05-5 Toughness test specimens.
46:2.0.1.2.12.3.1.4SECTION 54.05-6
   54.05-6 Toughness test temperatures.
46:2.0.1.2.12.3.1.5SECTION 54.05-10
   54.05-10 Certification of material toughness tests.
46:2.0.1.2.12.3.1.6SECTION 54.05-15
   54.05-15 Weldment toughness tests - procedure qualifications.
46:2.0.1.2.12.3.1.7SECTION 54.05-16
   54.05-16 Production toughness testing.
46:2.0.1.2.12.3.1.8SECTION 54.05-17
   54.05-17 Weld toughness test acceptance criteria.
46:2.0.1.2.12.3.1.9SECTION 54.05-20
   54.05-20 Impact test properties for service of 0 °F and below.
46:2.0.1.2.12.3.1.10SECTION 54.05-25
   54.05-25 [Reserved]
46:2.0.1.2.12.3.1.11SECTION 54.05-30
   54.05-30 Allowable stress values at low temperatures.
46:2.0.1.2.12.4SUBPART 54.10
Subpart 54.10 - Inspection, Reports, and Stamping
46:2.0.1.2.12.4.1.1SECTION 54.10-1
   54.10-1 Scope (modifies UG-90 through UG-103 and UG-115 through UG-120).
46:2.0.1.2.12.4.1.2SECTION 54.10-3
   54.10-3 Marine inspectors (replaces UG-90 and UG-91, and modifies UG-92 through UG-103).
46:2.0.1.2.12.4.1.3SECTION 54.10-5
   54.10-5 Maximum allowable working pressure (reproduces UG-98).
46:2.0.1.2.12.4.1.4SECTION 54.10-10
   54.10-10 Standard hydrostatic test (modifies UG-99).
46:2.0.1.2.12.4.1.5SECTION 54.10-15
   54.10-15 Pneumatic test (modifies UG-100).
46:2.0.1.2.12.4.1.6SECTION 54.10-20
   54.10-20 Marking and stamping.
46:2.0.1.2.12.4.1.7SECTION 54.10-25
   54.10-25 Manufacturers' data report forms (modifies UG-120).
46:2.0.1.2.12.5SUBPART 54.15
Subpart 54.15 - Pressure-Relief Devices
46:2.0.1.2.12.5.1.1SECTION 54.15-1
   54.15-1 General (modifies UG-125 through UG-137).
46:2.0.1.2.12.5.1.2SECTION 54.15-3
   54.15-3 Definitions (modifies appendix 3).
46:2.0.1.2.12.5.1.3SECTION 54.15-5
   54.15-5 Protective devices (modifies UG-125).
46:2.0.1.2.12.5.1.4SECTION 54.15-10
   54.15-10 Safety and relief valves (modifies UG-126).
46:2.0.1.2.12.5.1.5SECTION 54.15-13
   54.15-13 Rupture disks (modifies UG-127).
46:2.0.1.2.12.5.1.6SECTION 54.15-15
   54.15-15 Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126).
46:2.0.1.2.12.5.1.7SECTION 54.15-25
   54.15-25 Minimum relief capacities for cargo tanks containing compressed or liquefied gas.
46:2.0.1.2.12.6SUBPART 54.20
Subpart 54.20 - Fabrication by Welding
46:2.0.1.2.12.6.1.1SECTION 54.20-1
   54.20-1 Scope (modifies UW-1 through UW-65).
46:2.0.1.2.12.6.1.2SECTION 54.20-2
   54.20-2 Fabrication for hazardous materials (replaces UW-2(a)).
46:2.0.1.2.12.6.1.3SECTION 54.20-3
   54.20-3 Design (modifies UW-9, UW-11(a), UW-13, and UW-16).
46:2.0.1.2.12.6.1.4SECTION 54.20-5
   54.20-5 Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48).
46:2.0.1.2.12.7SUBPART 54.23
Subpart 54.23 - Fabrication by Brazing
46:2.0.1.2.12.7.1.1SECTION 54.23-1
   54.23-1 Scope (modifies UB-1).
46:2.0.1.2.12.8SUBPART 54.25
Subpart 54.25 - Construction With Carbon, Alloy, and Heat Treated Steels
46:2.0.1.2.12.8.1.1SECTION 54.25-1
   54.25-1 Scope.
46:2.0.1.2.12.8.1.2SECTION 54.25-3
   54.25-3 Steel plates (modifies UCS-6).
46:2.0.1.2.12.8.1.3SECTION 54.25-5
   54.25-5 Corrosion allowance.
46:2.0.1.2.12.8.1.4SECTION 54.25-7
   54.25-7 Requirement for postweld heat treatment (modifies UCS-56).
46:2.0.1.2.12.8.1.5SECTION 54.25-8
   54.25-8 Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57).
46:2.0.1.2.12.8.1.6SECTION 54.25-10
   54.25-10 Low temperature operation - ferritic steels (replaces UCS-65 through UCS-67).
46:2.0.1.2.12.8.1.7SECTION 54.25-15
   54.25-15 Low temperature operation - high alloy steels (modifies UHA-23(b) and UHA-51).
46:2.0.1.2.12.8.1.8SECTION 54.25-20
   54.25-20 Low temperature operation - ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82).
46:2.0.1.2.12.8.1.9SECTION 54.25-25
   54.25-25 Welding of quenched and tempered steels (modifies UHT-82).
46:2.0.1.2.12.9SUBPART 54.30
Subpart 54.30 - Mechanical Stress Relief
46:2.0.1.2.12.9.1.1SECTION 54.30-1
   54.30-1 Scope.
46:2.0.1.2.12.9.1.2SECTION 54.30-3
   54.30-3 Introduction.
46:2.0.1.2.12.9.1.3SECTION 54.30-5
   54.30-5 Limitations and requirements.
46:2.0.1.2.12.9.1.4SECTION 54.30-10
   54.30-10 Method of performing mechanical stress relief.
46:2.0.1.2.12.9.1.5SECTION 54.30-15
   54.30-15 Requirement for analysis and computation.