Appendix A to Subpart A of Part 53 - References
40:6.0.1.1.1.1.1.17.2 : Appendix A
Appendix A to Subpart A of Part 53 - References
(1) American National Standard Quality Systems - Model for
Quality Assurance in Design, Development, Production, Installation,
and Servicing, ANSI/ISO/ASQC Q9001-1994. Available from American
Society for Quality, P.O. Box 3005, Milwaukee, WI 53202
(http://qualitypress.asq.org).
(2) American National Standard Quality Systems for Environmental
Data and Technology Programs - Requirements with guidance for use,
ANSI/ASQC E4-2004. Available from American Society for Quality P.O.
Box 3005, Milwaukee, WI 53202
(http://qualitypress.asq.org).
(3) Dimensioning and Tolerancing, ASME Y14.5M-1994. Available
from the American Society of Mechanical Engineers, 345 East 47th
Street, New York, NY 10017.
(4) Mathematical Definition of Dimensioning and Tolerancing
Principles, ASME Y14.5.1M-1994. Available from the American Society
of Mechanical Engineers, 345 East 47th Street, New York, NY
10017.
(5) ISO 10012, Quality Assurance Requirements for Measuring
Equipment-Part 1: Meteorological confirmation system for measuring
equipment):1992(E). Available from American Society for Quality
Control, 611 East Wisconsin Avenue, Milwaukee, WI 53202.
(6) Quality Assurance Guidance Document 2.12. Monitoring PM 2.5
in Ambient Air Using Designated Reference or Class I Equivalent
Methods. U.S. EPA, National Exposure Research Laboratory, Research
Triangle Park, NC, November 1998 or later edition. Currently
available at http://www.epa.gov/ttn/amtic/pmqainf.html.
[62 FR 38784, July 18, 1997, as amended at 71 FR 61278, Oct. 17,
2006]
Appendix A to Subpart C of Part 53 - References
40:6.0.1.1.1.3.1.7.19 : Appendix A
Appendix A to Subpart C of Part 53 - References
(1) American National Standard Quality Systems for Environmental
Data and Technology Programs - Requirements with guidance for use,
ANSI/ASQC E4-2004. Available from American Society for Quality,
P.O. Box 3005, Milwaukee, WI 53202
(http://qualitypress.asq.org).
(2) Quality Assurance Guidance Document 2.12. Monitoring PM 2.5
in Ambient Air Using Designated Reference or Class I Equivalent
Methods. U.S. EPA, National Exposure Research Laboratory, Research
Triangle Park, NC, November 1998 or later edition. Currently
available at http://www.epa.gov/ttn/amtic/pmqainf.html.
Appendix A to Subpart E of Part 53 - References
40:6.0.1.1.1.5.1.11.23 : Appendix A
Appendix A to Subpart E of Part 53 - References
(1) American National Standard Quality Systems - Model for
Quality Assurance in Design, Development, Production, Installation,
and Servicing, ANSI/ISO/ASQC Q9001-1994. Available from American
Society for Quality, P.O. Box 3005, Milwaukee, WI 53202
(http://qualitypress.asq.org).
(2) American National Standard Quality Systems for Environmental
Data and Technology Programs - Requirements with guidance for use,
ANSI/ASQC E4-2004. Available from American Society for Quality,
P.O. Box 3005, Milwaukee, WI 53202
(http://qualitypress.asq.org).
(3) Quality Assurance Guidance Document 2.12. Monitoring PM 2.5
in Ambient Air Using Designated Reference or Class I Equivalent
Methods. U.S. EPA, National Exposure Research Laboratory, Research
Triangle Park, NC, November 1998 or later edition. Currently
available at http://www.epa.gov/ttn/amtic/pmqainf.html.
(4) Military standard specification (mil. spec.) 8625F, Type II,
Class 1 as listed in Department of Defense Index of Specifications
and Standards (DODISS), available from DODSSP-Customer Service,
Standardization Documents Order Desk, 700 Robbins Avenue, Building
4D, Philadelphia, PA 1911-5094.
(5) Quality Assurance Handbook for Air Pollution Measurement
Systems, Volume IV: Meteorological Measurements. Revised March,
1995. EPA-600/R-94-038d. Available from National Technical
Information Service, Springfield, VA 22161, (800-553-6847,
http://www.ntis.gov). NTIS number PB95-199782INZ.
(6) Military standard specification (mil. spec.) 810-E as listed
in Department of Defense Index of Specifications and Standards
(DODISS), available from DODSSP-Customer Service, Standardization
Documents Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 1911-5094.
[62 FR 38799, July 18, 1997, as amended at 71 FR 61295, Oct. 17,
2006]
Appendix A to Subpart F of Part 53 - References
40:6.0.1.1.1.6.1.8.31 : Appendix A
Appendix A to Subpart F of Part 53 - References
(1) Marple, V.A., K.L. Rubow, W. Turner, and J.D. Spangler, Low
Flow Rate Sharp Cut Impactors for Indoor Air Sampling: Design and
Calibration., JAPCA, 37: 1303-1307 (1987).
(2) Vanderpool, R.W. and K.L. Rubow, Generation of Large, Solid
Calibration Aerosols, J. of Aer. Sci. and Tech., 9:65-69
(1988).
(3) Society of Automotive Engineers Aerospace Material
Specification (SAE AMS) 2404C, Electroless Nickel Planting, SAE,
400 Commonwealth Drive, Warrendale PA-15096, Revised 7-1-84, pp.
1-6.
