Title 49 Part 178 → Subpart B → §178.33a-6

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 178 → Subpart B → §178.33a-6

Electronic Code of Federal Regulations e-CFR

Title 49 Part 178 → Subpart B → §178.33a-6

e-CFR data is current as of June 3, 2020

Title 49Subtitle BChapter ISubchapter CPart 178Subpart B → §178.33a-6

Title 49: Transportation
Subpart B—Specifications for Inside Containers, and Linings

§178.33a-6   Manufacture.

(a) By appliances and methods that will assure uniformity of completed containers; dirt and scale to be removed as necessary; no defect acceptable that is likely to weaken the finished container appreciably; reasonably smooth and uniform surface finish required.

(b) Seams when used must be as follows:

(1) Circumferential seams. By welding, swedging, brazing, soldering, or double seaming.

(2) Side seams. By welding, brazing or soldering.

(c) Ends. The ends shall be of pressure design.

[Order 71, 31 FR 9074, July 1, 1966. Redesignated at 32 FR 5606, Apr. 5, 1967]