';


Title 49 Part 178 → Subpart H → §178.255-14

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 178 → Subpart H → §178.255-14

Electronic Code of Federal Regulations e-CFR

Title 49 Part 178 → Subpart H → §178.255-14

e-CFR data is current as of November 14, 2019

Title 49Subtitle BChapter ISubchapter CPart 178Subpart H → §178.255-14


Title 49: Transportation
PART 178—SPECIFICATIONS FOR PACKAGINGS
Subpart H—Specifications for Portable Tanks


§178.255-14   Marking.

(a) In addition to markings required by Section VIII of the ASME Code (IBR, see §171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows:

Manufacturer's name _______ Serial No.
DOT specification

Nominal capacity _______ (gallons)

Tare weight _______ (pounds)

Date of manufacture

(b) [Reserved]

[29 FR 18972, Dec. 29, 1964. Redesignated at 32 FR 5606, Apr. 5, 1967, and amended by Amdt. 178-67, 46 FR 49906, Oct. 8, 1981; 68 FR 75750, Dec. 31, 2003]


© e-CFR 2019

FR | USC | CFR | eCFR