46:2.0.1.2.13.1 | SUBPART 56.01
| Subpart 56.01 - General | |
46:2.0.1.2.13.1.1.1 | SECTION 56.01-1
| 56.01-1 Scope (replaces 100.1). | |
46:2.0.1.2.13.1.1.2 | SECTION 56.01-2
| 56.01-2 Incorporation by reference. | |
46:2.0.1.2.13.1.1.3 | SECTION 56.01-3
| 56.01-3 Power boilers, external piping and appurtenances (Replaces 100.1.1, 100.1.2, 122.1, 132 and 133). | |
46:2.0.1.2.13.1.1.4 | SECTION 56.01-5
| 56.01-5 Adoption of ASME B31.1 for power piping, and other standards. | |
46:2.0.1.2.13.1.1.5 | SECTION 56.01-10
| 56.01-10 Plan approval. | |
46:2.0.1.2.13.2 | SUBPART 56.04
| Subpart 56.04 - Piping Classification | |
46:2.0.1.2.13.2.1.1 | SECTION 56.04-1
| 56.04-1 Scope. | |
46:2.0.1.2.13.2.1.2 | SECTION 56.04-2
| 56.04-2 Piping classification according to service. | |
46:2.0.1.2.13.2.1.3 | SECTION 56.04-10
| 56.04-10 Other systems. | |
46:2.0.1.2.13.3 | SUBPART 56.07
| Subpart 56.07 - Design | |
46:2.0.1.2.13.3.1.1 | SECTION 56.07-5
| 56.07-5 Definitions (modifies 100.2). | |
46:2.0.1.2.13.3.1.2 | SECTION 56.07-10
| 56.07-10 Design conditions and criteria (modifies 101-104.7). | |
46:2.0.1.2.13.4 | SUBPART 56.10
| Subpart 56.10 - Components | |
46:2.0.1.2.13.4.1.1 | SECTION 56.10-1
| 56.10-1 Selection and limitations of piping components (replaces 105 through 108). | |
46:2.0.1.2.13.4.1.2 | SECTION 56.10-5
| 56.10-5 Pipe. | |
46:2.0.1.2.13.5 | SUBPART 56.15
| Subpart 56.15 - Fittings | |
46:2.0.1.2.13.5.1.1 | SECTION 56.15-1
| 56.15-1 Pipe joining fittings. | |
46:2.0.1.2.13.5.1.2 | SECTION 56.15-5
| 56.15-5 Fluid-conditioner fittings. | |
46:2.0.1.2.13.5.1.3 | SECTION 56.15-10
| 56.15-10 Special purpose fittings. | |
46:2.0.1.2.13.6 | SUBPART 56.20
| Subpart 56.20 - Valves | |
46:2.0.1.2.13.6.1.1 | SECTION 56.20-1
| 56.20-1 General. | |
46:2.0.1.2.13.6.1.2 | SECTION 56.20-5
| 56.20-5 Marking (modifies 107.2). | |
46:2.0.1.2.13.6.1.3 | SECTION 56.20-7
| 56.20-7 Ends. | |
46:2.0.1.2.13.6.1.4 | SECTION 56.20-9
| 56.20-9 Valve construction. | |
46:2.0.1.2.13.6.1.5 | SECTION 56.20-15
| 56.20-15 Valves employing resilient material. | |
46:2.0.1.2.13.6.1.6 | SECTION 56.20-20
| 56.20-20 Valve bypasses. | |
46:2.0.1.2.13.7 | SUBPART 56.25
| Subpart 56.25 - Pipe Flanges, Blanks, Flange Facings, Gaskets, and Bolting | |
46:2.0.1.2.13.7.1.1 | SECTION 56.25-5
| 56.25-5 Flanges. | |
46:2.0.1.2.13.7.1.2 | SECTION 56.25-7
| 56.25-7 Blanks. | |
46:2.0.1.2.13.7.1.3 | SECTION 56.25-10
| 56.25-10 Flange facings. | |
46:2.0.1.2.13.7.1.4 | SECTION 56.25-15
| 56.25-15 Gaskets (modifies 108.4). | |
46:2.0.1.2.13.7.1.5 | SECTION 56.25-20
| 56.25-20 Bolting. | |
46:2.0.1.2.13.8 | SUBPART 56.30
| Subpart 56.30 - Selection and Limitations of Piping Joints | |
46:2.0.1.2.13.8.1.1 | SECTION 56.30-1
| 56.30-1 Scope (replaces 110 through 118). | |
46:2.0.1.2.13.8.1.2 | SECTION 56.30-3
| 56.30-3 Piping joints (reproduces 110). | |
46:2.0.1.2.13.8.1.3 | SECTION 56.30-5
| 56.30-5 Welded joints. | |
46:2.0.1.2.13.8.1.4 | SECTION 56.30-10
| 56.30-10 Flanged joints (modifies 104.5.1(a)). | |
46:2.0.1.2.13.8.1.5 | SECTION 56.30-15
| 56.30-15 Expanded or rolled joints. | |
46:2.0.1.2.13.8.1.6 | SECTION 56.30-20
| 56.30-20 Threaded joints. | |
46:2.0.1.2.13.8.1.7 | SECTION 56.30-25
| 56.30-25 Flared, flareless, and compression fittings. | |
46:2.0.1.2.13.8.1.8 | SECTION 56.30-27
| 56.30-27 Caulked joints. | |
46:2.0.1.2.13.8.1.9 | SECTION 56.30-30
| 56.30-30 Brazed joints. | |
46:2.0.1.2.13.8.1.10 | SECTION 56.30-35
| 56.30-35 Gasketed mechanical couplings. | |
46:2.0.1.2.13.8.1.11 | SECTION 56.30-40
| 56.30-40 Flexible pipe couplings of the compression or slip-on type. | |
46:2.0.1.2.13.9 | SUBPART 56.35
| Subpart 56.35 - Expansion, Flexibility and Supports | |
46:2.0.1.2.13.9.1.1 | SECTION 56.35-1
| 56.35-1 Pipe stress calculations (replaces 119.7). | |
46:2.0.1.2.13.9.1.2 | SECTION 56.35-10
| 56.35-10 Nonmetallic expansion joints (replaces 119.5.1). | |
46:2.0.1.2.13.9.1.3 | SECTION 56.35-15
| 56.35-15 Metallic expansion joints (replaces 119.5.1). | |
46:2.0.1.2.13.10 | SUBPART 56.50
| Subpart 56.50 - Design Requirements Pertaining to Specific Systems | |
46:2.0.1.2.13.10.1.1 | SECTION 56.50-1
| 56.50-1 General (replaces 122). | |
46:2.0.1.2.13.10.1.2 | SECTION 56.50-10
| 56.50-10 Special gauge requirements. | |
46:2.0.1.2.13.10.1.3 | SECTION 56.50-15
| 56.50-15 Steam and exhaust piping. | |
46:2.0.1.2.13.10.1.4 | SECTION 56.50-20
| 56.50-20 Pressure relief piping. | |
46:2.0.1.2.13.10.1.5 | SECTION 56.50-25
| 56.50-25 Safety and relief valve escape piping. | |
46:2.0.1.2.13.10.1.6 | SECTION 56.50-30
| 56.50-30 Boiler feed piping. | |
46:2.0.1.2.13.10.1.7 | SECTION 56.50-35
| 56.50-35 Condensate pumps. | |
46:2.0.1.2.13.10.1.8 | SECTION 56.50-40
| 56.50-40 Blowoff piping (replaces 122.1.4). | |
46:2.0.1.2.13.10.1.9 | SECTION 56.50-45
| 56.50-45 Circulating pumps. | |
46:2.0.1.2.13.10.1.10 | SECTION 56.50-50
| 56.50-50 Bilge and ballast piping. | |
46:2.0.1.2.13.10.1.11 | SECTION 56.50-55
| 56.50-55 Bilge pumps. | |
46:2.0.1.2.13.10.1.12 | SECTION 56.50-57
| 56.50-57 Bilge piping and pumps, alternative requirements. | |
46:2.0.1.2.13.10.1.13 | SECTION 56.50-60
| 56.50-60 Systems containing oil. | |
46:2.0.1.2.13.10.1.14 | SECTION 56.50-65
| 56.50-65 Burner fuel-oil service systems. | |
46:2.0.1.2.13.10.1.15 | SECTION 56.50-70
| 56.50-70 Gasoline fuel systems. | |
46:2.0.1.2.13.10.1.16 | SECTION 56.50-75
| 56.50-75 Diesel fuel systems. | |
46:2.0.1.2.13.10.1.17 | SECTION 56.50-80
| 56.50-80 Lubricating-oil systems. | |
46:2.0.1.2.13.10.1.18 | SECTION 56.50-85
| 56.50-85 Tank-vent piping. | |
46:2.0.1.2.13.10.1.19 | SECTION 56.50-90
| 56.50-90 Sounding devices. | |
46:2.0.1.2.13.10.1.20 | SECTION 56.50-95
| 56.50-95 Overboard discharges and shell connections. | |
46:2.0.1.2.13.10.1.21 | SECTION 56.50-96
| 56.50-96 Keel cooler installations. | |
46:2.0.1.2.13.10.1.22 | SECTION 56.50-97
| 56.50-97 Piping for instruments, control, and sampling (modifies 122.3). | |
46:2.0.1.2.13.10.1.23 | SECTION 56.50-103
| 56.50-103 Fixed oxygen-acetylene distribution piping. | |
46:2.0.1.2.13.10.1.24 | SECTION 56.50-105
| 56.50-105 Low-temperature piping. | |
46:2.0.1.2.13.10.1.25 | SECTION 56.50-110
| 56.50-110 Diving support systems. | |
46:2.0.1.2.13.11 | SUBPART 56.60
| Subpart 56.60 - Materials | |
46:2.0.1.2.13.11.1.1 | SECTION 56.60-1
| 56.60-1 Acceptable materials and specifications (replaces 123 and Table 126.1 in ASME B31.1). | |
46:2.0.1.2.13.11.1.2 | SECTION 56.60-2
| 56.60-2 Limitations on materials. | |
46:2.0.1.2.13.11.1.3 | SECTION 56.60-3
| 56.60-3 Ferrous materials. | |
46:2.0.1.2.13.11.1.4 | SECTION 56.60-5
| 56.60-5 Steel (High temperature applications). | |
46:2.0.1.2.13.11.1.5 | SECTION 56.60-10
| 56.60-10 Cast iron and malleable iron. | |
46:2.0.1.2.13.11.1.6 | SECTION 56.60-15
| 56.60-15 Ductile iron. | |
46:2.0.1.2.13.11.1.7 | SECTION 56.60-20
| 56.60-20 Nonferrous materials. | |
46:2.0.1.2.13.11.1.8 | SECTION 56.60-25
| 56.60-25 Nonmetallic materials. | |
46:2.0.1.2.13.12 | SUBPART 56.65
| Subpart 56.65 - Fabrication, Assembly and Erection | |
46:2.0.1.2.13.12.1.1 | SECTION 56.65-1
| 56.65-1 General (replaces 127 through 135). | |
46:2.0.1.2.13.12.1.2 | SECTION 56.70-1
| 56.70-1 General. | |
46:2.0.1.2.13.12.1.3 | SECTION 56.70-3
| 56.70-3 Limitations. | |
46:2.0.1.2.13.12.1.4 | SECTION 56.70-5
| 56.70-5 Material. | |
46:2.0.1.2.13.12.1.5 | SECTION 56.70-10
| 56.70-10 Preparation (modifies 127.3). | |
46:2.0.1.2.13.12.1.6 | SECTION 56.70-15
| 56.70-15 Procedure. | |
46:2.0.1.2.13.12.1.7 | SECTION 56.70-20
| 56.70-20 Qualification, general. | |
46:2.0.1.2.13.13 | SUBPART 56.75
| Subpart 56.75 - Brazing | |
46:2.0.1.2.13.13.1.1 | SECTION 56.75-5
| 56.75-5 Filler metal. | |
46:2.0.1.2.13.13.1.2 | SECTION 56.75-10
| 56.75-10 Joint clearance. | |
46:2.0.1.2.13.13.1.3 | SECTION 56.75-15
| 56.75-15 Heating | |
46:2.0.1.2.13.13.1.4 | SECTION 56.75-20
| 56.75-20 Brazing qualification. | |
46:2.0.1.2.13.13.1.5 | SECTION 56.75-25
| 56.75-25 Detail requirements. | |
46:2.0.1.2.13.13.1.6 | SECTION 56.75-30
| 56.75-30 Pipe joining details. | |
46:2.0.1.2.13.14 | SUBPART 56.80
| Subpart 56.80 - Bending and Forming | |
46:2.0.1.2.13.14.1.1 | SECTION 56.80-5
| 56.80-5 Bending. | |
46:2.0.1.2.13.14.1.2 | SECTION 56.80-10
| 56.80-10 Forming (reproduces 129.2). | |
46:2.0.1.2.13.14.1.3 | SECTION 56.80-15
| 56.80-15 Heat treatment of bends and formed components. | |
46:2.0.1.2.13.15 | SUBPART 56.85
| Subpart 56.85 - Heat Treatment of Welds | |
46:2.0.1.2.13.15.1.1 | SECTION 56.85-5
| 56.85-5 Heating and cooling method. | |
46:2.0.1.2.13.15.1.2 | SECTION 56.85-10
| 56.85-10 Preheating. | |
46:2.0.1.2.13.15.1.3 | SECTION 56.85-15
| 56.85-15 Postheat treatment. | |
46:2.0.1.2.13.16 | SUBPART 56.90
| Subpart 56.90 - Assembly | |
46:2.0.1.2.13.16.1.1 | SECTION 56.90-1
| 56.90-1 General. | |
46:2.0.1.2.13.16.1.2 | SECTION 56.90-5
| 56.90-5 Bolting procedure. | |
46:2.0.1.2.13.16.1.3 | SECTION 56.90-10
| 56.90-10 Threaded piping (modifies 135.5). | |
46:2.0.1.2.13.17 | SUBPART 56.95
| Subpart 56.95 - Inspection | |
46:2.0.1.2.13.17.1.1 | SECTION 56.95-1
| 56.95-1 General (replaces 136). | |
46:2.0.1.2.13.17.1.2 | SECTION 56.95-5
| 56.95-5 Rights of access of marine inspectors. | |
46:2.0.1.2.13.17.1.3 | SECTION 56.95-10
| 56.95-10 Type and extent of examination required. | |
46:2.0.1.2.13.18 | SUBPART 56.97
| Subpart 56.97 - Pressure Tests | |
46:2.0.1.2.13.18.1.1 | SECTION 56.97-1
| 56.97-1 General (replaces 137). | |
46:2.0.1.2.13.18.1.2 | SECTION 56.97-5
| 56.97-5 Pressure testing of nonstandard piping system components. | |
46:2.0.1.2.13.18.1.3 | SECTION 56.97-25
| 56.97-25 Preparation for testing (reproduces 137.2). | |
46:2.0.1.2.13.18.1.4 | SECTION 56.97-30
| 56.97-30 Hydrostatic tests (modifies 137.4). | |
46:2.0.1.2.13.18.1.5 | SECTION 56.97-35
| 56.97-35 Pneumatic tests (replaces 137.5). | |
46:2.0.1.2.13.18.1.6 | SECTION 56.97-38
| 56.97-38 Initial service leak test (reproduces 137.7). | |
46:2.0.1.2.13.18.1.7 | SECTION 56.97-40
| 56.97-40 Installation tests. | |