Title 40

PART 1037 SUBPART f

Subpart F - Test and Modeling Procedures

40:36.0.1.1.6.5.4.1SECTION 1037.501
   1037.501 General testing and modeling provisions.
40:36.0.1.1.6.5.4.2SECTION 1037.510
   1037.510 Duty-cycle exhaust testing.
40:36.0.1.1.6.5.4.3SECTION 1037.515
   1037.515 Determining CO2 emissions to show compliance for trailers.
40:36.0.1.1.6.5.4.4SECTION 1037.520
   1037.520 Modeling CO2 emissions to show compliance for vocational vehicles and tractors.
40:36.0.1.1.6.5.4.5SECTION 1037.525
   1037.525 Aerodynamic measurements for tractors.
40:36.0.1.1.6.5.4.6SECTION 1037.526
   1037.526 Aerodynamic measurements for trailers.
40:36.0.1.1.6.5.4.7SECTION 1037.527
   1037.527 Aerodynamic measurements for vocational vehicles.
40:36.0.1.1.6.5.4.8SECTION 1037.528
   1037.528 Coastdown procedures for calculating drag area (CdA).
40:36.0.1.1.6.5.4.9SECTION 1037.530
   1037.530 Wind-tunnel procedures for calculating drag area (CdA).
40:36.0.1.1.6.5.4.10SECTION 1037.532
   1037.532 Using computational fluid dynamics to calculate drag area (CdA).
40:36.0.1.1.6.5.4.11SECTION 1037.534
   1037.534 Constant-speed procedure for calculating drag area (CdA).
40:36.0.1.1.6.5.4.12SECTION 1037.540
   1037.540 Special procedures for testing vehicles with hybrid power take-off.
40:36.0.1.1.6.5.4.13SECTION 1037.550
   1037.550 Powertrain testing.
40:36.0.1.1.6.5.4.14SECTION 1037.551
   1037.551 Engine-based simulation of powertrain testing.
40:36.0.1.1.6.5.4.15SECTION 1037.555
   1037.555 Special procedures for testing Phase 1 hybrid systems.
40:36.0.1.1.6.5.4.16SECTION 1037.560
   1037.560 Axle efficiency test.
40:36.0.1.1.6.5.4.17SECTION 1037.565
   1037.565 Transmission efficiency test.