Title 40 Part 59 Appendix Code of Federal Regulations

Coating category	Grams VOC per liter	Pounds VOC per gallon ^a
Pretreatment wash primers	780	6.5
Primers/primer surfacers	580	4.8
Primer sealers	550	4.6
Single/two-stage topcoats	600	5.0
Topcoats of more than two stages	630	5.2
Multi-colored topcoats	680	5.7
Specialty coatings	840	7.0

Product category	VOC content limit (weight-percent VOC)
Air fresheners:
Single-phase	70
Double-phase	30
Liquids/pump sprays	18
Solids/gels	3
Automotive windshield washer fluid	35
Bathroom and tile cleaners:
Aerosols	7
All other forms	5
Carburetor and choke cleaners	75
Cooking sprays - aerosol	18
Dusting aids:
Aerosols	35
All other forms	7
Engine degreasers	75
Fabric protectants	75
Floor polishes/waxes:
Products for flexible flooring materials	7
Products for nonresilient flooring	10
Wood floor wax	90
Furniture maintenance products-aerosol	25
General purpose cleaners	10
Glass cleaners:
Aerosols	12
All other forms	8
Hairsprays	80
Hair mousses	16
Hair Styling gels	6
Household adhesives:
Aerosols	75
Contact	80
Construction and panel	40
General purpose	10
Structural waterproof	15
Insecticides:
Crawling bug	40
Flea and tick	25
Flying bug	35
Foggers	45
Lawn and Garden	20
Laundry prewash:
Aerosols/solids	22
All other forms	5
Laundry starch products	5
Nail polish removers	85
Oven cleaners:
Aerosols/pump	8
Liquids	5
Shaving creams	5

Product category	Percent HVOC content limit (weight-percent HVOC)
Underarm antiperspirants - aerosol	60
Underarm deodorants - aerosol	20

Appendix A to Subpart D of Part 59 - Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings

40:6.0.1.1.7.4.6.15.45 : Appendix A

Appendix A to Subpart D of Part 59 - Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings 1.0 Principle and Applicability

1.1 Applicability. This modification to Method 24 of appendix A of 40 CFR part 60 applies to the determination of volatile matter content of methacrylate multicomponent coatings used as traffic marking coatings.

1.2 Principle. A known amount of methacrylate multicomponent coating is dispersed in a weighing dish using a stirring device before the volatile matter is removed by heating in an oven.

2.0 Procedure

2.1 Prepare about 100 milliliters (mL) of sample by mixing the components in a storage container, such as a glass jar with a screw top or a metal can with a cap. The storage container should be just large enough to hold the mixture. Combine the components (by weight or volume) in the ratio recommended by the manufacturer. Tightly close the container between additions and during mixing to prevent loss of volatile materials. Most manufacturers' mixing instructions are by volume. Because of possible error caused by expansion of the liquid when measuring the volume, it is recommended that the components be combined by weight. When weight is used to combine the components and the manufacturer's recommended ratio is by volume, the density must be determined by section 3.5 of Method 24 of appendix A of 40 CFR part 60.

2.2 Immediately after mixing, take aliquots from this 100 mL sample for determination of the total volatile content, water content, and density. To determine water content, follow section 3.4 of Method 24 of appendix A of 40 CFR part 60. To determine density, follow section 3.5 of Method 24. To determine total volatile content, use the apparatus and reagents described in section 3.8.2 of Method 24 and the following procedures:

2.2.1 Weigh and record the weight of an aluminum foil weighing dish and a metal paper clip. Using a syringe as specified in section 3.8.2.1 of Method 24, weigh to 1 milligrams (mg), by difference, a sample of coating into the weighing dish. For methacrylate multicomponent coatings used for traffic marking use 3.0 ±0.1 g.

2.2.2 Add the specimen and use the metal paper clip to disperse the specimen over the surface of the weighing dish. If the material forms a lump that cannot be dispersed, discard the specimen and prepare a new one. Similarly, prepare a duplicate. The sample shall stand for a minimum of 1 hour, but no more than 24 hours before being oven dried at 110 ±5 degrees Celsius for 1 hour.

2.2.3 Heat the aluminum foil dishes containing the dispersed specimens in the forced draft oven for 60 minutes at 110 ±5 degrees Celsius. Caution - provide adequate ventilation, consistent with accepted laboratory practice, to prevent solvent vapors from accumulating to a dangerous level.

2.2.4 Remove the dishes from the oven, place immediately in a desiccator, cool to ambient temperature, and weigh to within 1 mg. After weighing, break up the film of the coating using the metal paper clip. Weigh dish to within 1 mg. Return to forced draft oven for an additional 60 minutes at 110 ±5 degrees Celsius.

2.2.5 Remove the dishes from the oven, place immediately in a desiccator, cool to ambient temperature, and weigh to within 1 mg.

2.2.6 Run analyses in pairs (duplicate sets for each coating mixture until the criterion in section 4.3 of Method 24 of appendix A of 40 CFR part 60 is met. Calculate the weight of volatile matter for each heating period following Equation 24-2 of Method 24 and record the arithmetic average. Add the arithmetic average for the two heating periods to obtain the weight fraction of the volatile matter.

3.0 Data Validation Procedure

3.1 Follow the procedures in Section 4 of Method 24 of appendix A to 40 CFR part 60.

3.2 If more than 10 percent of the sample is lost when the sample is being broken up in 2.2.4, the sample is invalid.

4.0 Calculations

Follow the calculation procedures in Section 5 of Method 24 of appendix A of 40 CFR part 60.

Table 1 to Subpart D of Part 59 - Volatile Organic Compound (VOC), Content Limits for Architectural Coatings

40:6.0.1.1.7.4.6.15.46 :

Table 1 to Subpart D of Part 59 - Volatile Organic Compound (VOC), Content Limits for Architectural Coatings

[Unless otherwise specified, limits are expressed in grams of VOC per liter of coating thinned to the manufacturer's maximum recommendation excluding the volume of any water, exempt compounds, or colorant added to tint bases.]

Coating category	Grams VOC per liter	Pounds VOC per gallon ^a
Antenna coatings	530	4.4
Anti-fouling coatings	450	3.8
Anti-graffiti coatings	600	5.0
Bituminous coatings and mastics	500	4.2
Bond breakers	600	5.0
Calcimine recoater	475	4.0
Chalkboard resurfacers	450	3.8
Concrete curing compounds	350	2.9
Concrete curing and sealing compounds	700	5.8
Concrete protective coatings	400	3.3
Concrete surface retarders	780	6.5
Conversion varnish	725	6.0
Dry fog coatings	400	3.3
Extreme high durability coatings	800	6.7
Faux finishing/glazing	700	5.8
Fire-retardant/resistive coatings:
Clear	850	7.1
Opaque	450	3.8
Flat coatings:
Exterior coatings	250	2.1
Interior coatings	250	2.1
Floor coatings	400	3.3
Flow coatings	650	5.4
Form release compounds	450	3.8
Graphic arts coatings (sign paints)	500	4.2
Heat reactive coatings	420	3.5
High temperature coatings	650	5.4
Impacted immersion coatings	780	6.5
Industrial maintenance coatings	450	3.8
Lacquers (including lacquer sanding sealers)	680	5.7
Magnesite cement coatings	600	5.0
Mastic texture coatings	300	2.5
Metallic pigmented coatings	500	4.2
Multi-colored coatings	580	4.8
Nonferrous ornamental metal lacquers and surface protectants	870	7.3
Nonflat coatings:
Exterior coatings	380	3.2
Interior coatings	380	3.2
Nuclear coatings	450	3.8
Pretreatment wash primers	780	6.5
Primers and undercoaters	350	2.9
Quick-dry coatings:
Enamels	450	3.8
Primers, sealers, and undercoaters	450	3.8
Repair and maintenance thermoplastic coatings	650	5.4
Roof coatings	250	2.1
Rust preventative coatings	400	3.3
Sanding sealers (other than lacquer sanding sealers)	550	4.6
Sealers (including interior clear wood sealers)	400	3.3
Shellacs:
Clear	730	6.1
Opaque	550	4.6
Stains:
Clear and semitransparent	550	4.6
Opaque	350	2.9
Low solids	^b 120	^b 1.0
Stain controllers	720	6.0
Swimming pool coatings	600	5.0
Thermoplastic rubber coatings and mastics	550	4.6
Traffic marking coatings	150	1.3
Varnishes	450	3.8
Waterproofing sealers and treatments	600	5.0
Wood preservatives:
Below ground wood preservatives	550	4.6
Clear and semitransparent	550	4.6
Opaque	350	2.9
Low solids	^b 120	^b 1.0
Zone marking coatings	450	3.8

^a English units are provided for information only. Compliance will be determined based on the VOC content limit, as expressed in metric units.

^b Units are grams of VOC per liter (pounds of VOC per gallon) of coating, including water and exempt compounds, thinned to the maximum thinning recommended by the manufacturer.

[63 FR 48877, Sept. 11, 1998; 63 FR 55175, Oct. 14, 1998; 63 FR 32103, June 15, 1999; 64 FR 35002, June 30, 1999]

Table 1 to Subpart E of Part 59 - Product-Weighted Reactivity Limits by Coating Category

40:6.0.1.1.7.5.6.18.47 :

Table 1 to Subpart E of Part 59 - Product-Weighted Reactivity Limits by Coating Category

Coating category	Category code ^a	Reactivity limit (g O3/g product)
Clear Coatings	CCP	1.50
Flat Coatings	FCP	1.20
Fluorescent Coatings	FLP	1.75
Metallic Coatings	MCP	1.90
Non-Flat Coatings	NFP	1.40
Primers	PCP	1.20
Ground Traffic/Marking	GTM	1.20
Art Fixatives or Sealants	AFS	1.80
Auto Body Primers	ABP	1.55
Automotive Bumper and Trim Products	ABT	1.75
Aviation or Marine Primers	AMP	2.00
Aviation Propellor Coatings	APC	2.50
Corrosion Resistant Brass, Bronze, or Copper Coatings	CRB	1.80
Exact Match Finish - Engine Enamel	EEE	1.70
Exact Match Finish - Automotive	EFA	1.50
Exact Match Finish - Industrial	EFI	2.05
Floral Sprays	FSP	1.70
Glass Coatings	GCP	1.40
High Temperature Coatings	HTC	1.85
Hobby/Model/Craft Coatings, Enamel	HME	1.45
Hobby/Model/Craft Coatings, Lacquer	HML	2.70
Hobby/Model/Craft Coatings, Clear or Metallic	HMC	1.60
Marine Spar Varnishes	MSV	0.90
Photograph Coatings	PHC	1.00
Pleasure Craft Primers, Surfacers or Undercoaters	PCS	1.05
Pleasure Craft Topcoats	PCT	0.60
Polyolefin Adhesion Promoters	PAP	2.50
Shellac Sealers, Clear	SSC	1.00
Shellac Sealers, Pigmented	SSP	0.95
Slip-Resistant Coatings	SRC	2.45
Spatter/Multicolor Coatings	SMC	1.05
Vinyl/Fabric/Leather/Polycarbonate Coatings	VFL	1.55
Webbing/Veiling Coatings	WFC	0.85
Weld-Through Primers	WTP	1.00
Wood Stains	WSP	1.40
Wood Touch-up/Repair or Restoration Coatings	WTR	1.50

^a Regulated entities may use these category codes or define their own in accordance with § 59.511(b)(6).

[77 FR 14283, Mar. 9, 2012]

Table 2A to Subpart E of Part 59 - Reactivity Factors

40:6.0.1.1.7.5.6.18.48 :

Table 2A to Subpart E of Part 59 - Reactivity Factors

Compound	CAS No.	Reactivity factor (g O3/g VOC)
Formaldehyde	50-00-0	8.97
Glycerol (1,2,3-Propanetriol)	56-81-5	3.27
Propylene Glycol	57-55-6	2.75
Ethanol	64-17-5	1.69
Formic Acid	64-18-6	0.08
Acetic Acid	64-19-7	0.71
Methanol	67-56-1	0.71
Isopropyl Alcohol (2-Propanol)	67-63-0	0.71
Acetone (Propanone)	67-64-1	0.43
n-Propanol (n-Propyl Alcohol)	71-23-8	2.74
n-Butyl Alcohol (Butanol)	71-36-3	3.34
n-Pentanol (Amyl Alcohol)	71-41-0	3.35
Benzene	71-43-2	0.81
1,1,1-Trichloroethane	71-55-6	0.00
Propane	74-98-6	0.56
Vinyl Chloride	75-01-4	2.92
Acetaldehyde	75-07-0	6.84
Methylene Chloride (Dichloromethane)	75-09-2	0.07
Ethylene Oxide	75-21-8	0.05
Isobutane	75-28-5	1.35
HFC-152A (1,1-Difluoroethane)	75-37-6	0.00
Propylene Oxide	75-56-9	0.32
t-Butyl Alcohol	75-65-0	0.45
Methyl t-Butyl Ketone	75-97-8	0.78
Isophorone (3,5,5-Trimethyl-2-Cyclohexenone)	78-59-1	10.58
Isopentane	78-78-4	1.68
Isobutanol	78-83-1	2.24
2-Butanol (s-Butyl Alcohol)	78-92-2	1.60
Methyl Ethyl Ketone (2-Butanone)	78-93-3	1.49
Monoisopropanol Amine (1-Amino-2-Propanol)	78-96-6	13.42
Trichloroethylene	79-01-6	0.60
Propionic Acid	79-09-4	1.16
Acrylic Acid	79-10-7	11.66
Methyl Acetate	79-20-9	0.07
Nitroethane	79-24-3	12.79
Methacrylic Acid	79-41-4	18.78
a-Pinene (Pine Oil)	80-56-8	4.29
Methyl Methacrylate	80-62-6	15.84
Naphthalene	91-20-3	3.26
Xylene, ortho-	95-47-6	7.49
o-Cresol	95-48-7	2.34
1,2,4-Trimethylbenzene	95-63-6	7.18
3-Pentanone	96-22-0	1.45
Methyl Ethyl Ketoxime (Ethyl Methyl Ketone Oxime)	96-29-7	22.04
gamma-Butyrolactone	96-48-0	1.15
Ethyl Lactate	97-64-3	2.71
Isobutyl Isobutyrate	97-85-8	0.61
Isobutyl Methacrylate	97-86-9	8.99
Butyl Methacrylate	97-88-1	9.09
Benzotrifluoride	98-08-8	0.26
PCBTF (p-Trifluoromethyl-Cl-Benzene)	98-56-6	0.11
Cumene (Isopropyl Benzene)	98-82-8	2.32
a-Methyl Styrene	98-83-9	1.72
Ethyl Benzene	100-41-4	2.79
Styrene	100-42-5	1.95
Benzaldehyde	100-52-7	0.00
Triethanolamine	102-71-6	2.76
2-Ethyl-Hexyl Acetate	103-09-3	0.79
2-Ethyl-Hexyl Acrylate	103-11-7	2.42
2-Ethyl-1-Hexanol (Ethyl Hexyl Alcohol)	104-76-7	2.20
Ethyl Propionate	105-37-3	0.79
s-Butyl Acetate	105-46-4	1.43
n-Propyl Propionate	106-36-5	0.93
Xylene, para-	106-42-3	4.25
p-Dichlorobenzene	106-46-7	0.20
Dimethyl Succinate	106-65-0	0.23
1,2-Epoxybutane (Ethyl Oxirane)	106-88-7	1.02
n-Propyl Bromide	106-94-5	0.35
Butane	106-97-8	1.33
1,3-Butadiene	106-99-0	13.58
Ethylene Glycol	107-21-1	3.36
2-Methyl-2,4-Pentanediol	107-41-5	1.04
Hexamethyldisiloxane	107-46-0	0.00
Isohexane Isomers	107-83-5	1.80
Methyl n-Propyl Ketone (2-Pentanone)	107-87-9	3.07
Propylene Glycol Monmethyl Ether (1-Methoxy-2-Propanol)	107-98-2	2.62
n,n-Dimethylethanolamine	108-01-0	4.76
1-Nitropropane	108-03-2	16.16
Vinyl Acetate	108-05-4	3.26
Methyl Isobutyl Ketone	108-10-1	4.31
Isopropyl Acetate	108-21-4	1.12
Propylene Carbonate (4-Methyl-1,3-Dioxolan-2one)	108-32-7	0.25
Xylene, meta-	108-38-3	10.61
Propylene Glycol Monomethyl Ether Acetate (1-Methoxy-2-Propyl Acetate)	108-65-6	1.71
1,3,5-Trimethyl Benzene	108-67-8	11.22
Di-Isobutyl Ketone (2,6-Dimethyl-4-Heptanone)	108-83-8	2.94
Methylcyclohexane	108-87-2	1.99
Toluene	108-88-3	3.97
Monochlorobenzene	108-90-7	0.36
Cyclohexanol	108-93-0	2.25
Cyclohexanone	108-94-1	1.61
n-Butyl Butyrate	109-21-7	1.12
Propyl Acetate	109-60-4	0.87
Pentane	109-66-0	1.54
Ethylene Glycol Monomethyl Ether (2-Methoxyethanol)	109-86-4	2.98
Tetrahydrofuran	109-99-9	4.95
Methyl Isoamyl Ketone (5-Methyl-2-Hexanone)	110-12-3	2.10
Isobutyl Acetate	110-19-0	0.67
Methyl Amyl Ketone	110-43-0	2.80
Hexane	110-54-3	1.45
n-Propyl Formate	110-74-7	0.93
2-Ethoxyethanol	110-80-5	3.78
Cyclohexane	110-82-7	1.46
Morpholine	110-91-8	15.43
Dipropylene Glycol	110-98-5	2.48
Ethylene Glycol Monoethyl Ether Acetate (2-Ethoxyethyl Acetate)	111-15-9	1.90
Diethylenetriamine	111-40-0	13.03
Diethanolamine	111-42-2	4.05
Diethylene Glycol	111-46-6	3.55
n-Octane	111-65-9	1.11
2-Butoxy-1-Ethanol (Ethylene Glycol Monobutyl Ether)	111-76-2	2.90
Diethylene Glycol Methyl Ether (2-(2-Methoxyethoxy) Ethanol)	111-77-3	2.90
n-Nonane	111-84-2	0.95
2-(2-Ethoxyethoxy) Ethanol	111-90-0	3.19
Ethylene Glycol Monobutyl Ether Acetate (2-Butoxyethyl Acetate)	112-07-2	1.67
2-(2-Ethoxyethoxy) Ethyl Acetate	112-15-2	1.50
2-(2-Butoxyethoxy)-Ethanol	112-34-5	2.70
Dimethyl Ether	115-10-6	0.93
Triethylamine	121-44-8	16.60
2-Phenoxyethanol; Ethylene Glycol Phenyl Ether	122-99-6	3.61
Diacetone Alcohol	123-42-2	0.68
2,4-Pentanedione	123-54-6	1.02
Butanal	123-72-8	6.74
Butyl Acetate, n	123-86-4	0.89
2-(2-Butoxyethoxy) Ethyl Acetate	124-17-4	1.38
2-Amino-2-Methyl-1-Propanol	124-68-5	15.08
Perchloroethylene	127-18-4	0.04
Ethanolamine	141-43-5	5.97
Ethyl acetate	141-78-6	0.64
Heptane	142-82-5	1.28
n-Hexyl Acetate (Hexyl Acetate)	142-92-7	0.87
2-Ethyl Hexanoic Acid	149-57-5	4.41
1,2,3-Trimethyl Benzene	526-73-8	11.26
t-Butyl Acetate	540-88-5	0.20
Methyl Isobutyrate	547-63-7	0.70
Methyl Lactate	547-64-8	2.75
Methyl Propionate	554-12-1	0.71
1,2 Butanediol	584-03-2	2.21
n-Butyl Propionate	590-01-2	0.89
Methyl n-Butyl Ketone (2-Hexanone)	591-78-6	3.55
Dimethyl carbonate	616-38-6	0.06
Ethyl Isopropyl Ether	625-54-7	3.86
Dimethyl Adipate	627-93-0	1.95
Methy n-Butyl Ether	628-28-4	3.66
Amyl Acetate (Pentyl Ethanoate, Pentyl Acetate)	628-63-7	0.96
Ethyl n-Butyl Ether	628-81-9	3.86
Ethyl t-Butyl Ether	637-92-3	2.11
1,3-Dioxolane	646-06-0	5.47
Ethyl-3-Ethoxypropionate	763-69-9	3.61
Methyl Pyrrolidone (n-Methyl-2-Pyrrolidone)	872-50-4	2.56
Dimethyl Gluterate	1119-40-0	0.51
Ethylene Glycol 2-Ethylhexyl Ether [2-(2-Ethylhexyloxy) Ethanol]	1559-35-9	1.71
Propylene Glycol Monopropyl Ether (1-Propoxy-2-Propanol)	1569-01-3	2.86
Propylene Glycol Monoethyl Ether (1-Ethoxy-2-Propanol)	1569-02-4	3.25
2-Methoxy-1-Propanol	1589-47-5	3.01
Methyl t-Butyl Ether	1634-04-4	0.78
Ethylcyclohexane	1678-91-7	1.75
Isoamyl Isobutyrate	2050-01-3	0.89
2-Propoxyethanol (Ethylene Glycol Monopropyl Ether)	2807-30-9	3.52
n-Butoxy-2-Propanol	5131-66-8	2.70
d-Limonene (Dipentene or Orange Terpene)	5989-27-5	3.99
Dipropylene Glycol Methyl Ether Isomer (2-[2Methoxypropoxy]-1-Propanol)	13588-28-8	3.02
Texanol (1,3 Pentanediol, 2,2,4-Trimethyl, 1-Isobutyrate)	25265-77-4	0.89
Isodecyl Alcohol (8-Methyl-1-Nonanol)	25339-17-7	1.23
Tripropylene Glycol Monomethyl Ether	25498-49-1	1.90
Glycol Ether DPNB (1-(2-Butoxy-1-Methylethoxy) 2-Propanol)	29911-28-2	1.96
Propylene Glycol t-Butyl Ether (1-tert-Butoxy-2-Propanol)	57018-52-7	1.71
2-Methoxy-1-Propyl Acetate	70657-70-4	1.12
Oxo-Heptyl Acetate	90438-79-2	0.97
2-tert-Butoxy-1-Propanol	94023-15-1	1.81
Oxo-Octyl Acetate	108419-32-5	0.96
C8 Disubstituted Benzenes	na	7.48
C9 Styrenes	na	1.72

[77 FR 14284, Mar. 9, 2012]

Table 2B to Subpart E of Part 59 - Reactivity Factors for Aliphatic Hydrocarbon Solvent Mixtures

40:6.0.1.1.7.5.6.18.49 :

Table 2B to Subpart E of Part 59 - Reactivity Factors for Aliphatic Hydrocarbon Solvent Mixtures

Bin	Average boiling point* (degrees F)	Criteria	Reactivity factor (g O3/g VOC)
1	80-205	Alkanes (<2% Aromatics)	2.08
2	80-205	N- & Iso-Alkanes (≥90% and <2% Aromatics)	1.59
3	80-205	Cyclo-Alkanes (≥90% and <2% Aromatics)	2.52
4	80-205	Alkanes (2 to <8% Aromatics)	2.24
5	80-205	Alkanes (8 to 22% Aromatics)	2.56
6	>205-340	Alkanes (<2% Aromatics)	1.41
7	>205-340	N- & Iso-Alkanes (≥90% and <2% Aromatics)	1.17
8	>205-340	Cyclo-Alkanes (≥90% and <2% Aromatics)	1.65
9	>205-340	Alkanes (2 to <8% Aromatics)	1.62
10	>205-340	Alkanes (8 to 22% Aromatics)	2.03
11	>340-460	Alkanes (<2% Aromatics)	0.91
12	>340-460	N- & Iso-Alkanes (≥90% and <2% Aromatics)	0.81
13	>340-460	Cyclo-Alkanes (≥90% and <2% Aromatics)	1.01
14	>340-460	Alkanes (2 to <8% Aromatics)	1.21
15	>340-460	Alkanes (8 to 22% Aromatics)	1.82
16	>460-580	Alkanes (<2% Aromatics)	0.57
17	>460-580	N- & Iso-Alkanes (≥90% and <2% Aromatics)	0.51
18	>460-580	Cyclo-Alkanes (≥90% and <2% Aromatics)	0.63
19	>460-580	Alkanes (2 to <8% Aromatics)	0.88
20	>460-580	Alkanes (8 to 22% Aromatics)	1.49

* Average Boiling Point = (Initial Boiling Point + Dry Point)/2(b) Aromatic Hydrocarbon Solvents

[77 FR 14286, Mar. 9, 2012]

Bin	Boiling range (degrees F)	Criteria	Reactivity factor (g O3/g VOC)
21	280-290	Aromatic Content (≥98%)	7.37
22	320-350	Aromatic Content (≥98%)	7.51
23	355-420	Aromatic Content (≥98%)	8.07
24	450-535	Aromatic Content (≥98%)	5.00

Title 40

PART 59 APPENDIX

Table 1 to Subpart B of Part 59 - Volatile Organic Compound (VOC) Content Limits for Automobile Refinish Coatings

40:6.0.1.1.7.2.6.13.41 :

Table 1 to Subpart C of Part 59 - VOC Content Limits by Product Category

40:6.0.1.1.7.3.6.15.42 :

Table 2 to Subpart C of Part 59 - HVOC 1 Content Limits for Underarm Deodorants and Underarm Antiperspirants

40:6.0.1.1.7.3.6.15.43 :

Appendix A to Subpart C of Part 59 - Figures

40:6.0.1.1.7.3.6.15.44 : Appendix A

Appendix A to Subpart D of Part 59 - Determination of Volatile Matter Content of Methacrylate Multicomponent Coatings Used as Traffic Marking Coatings

40:6.0.1.1.7.4.6.15.45 : Appendix A

Table 1 to Subpart D of Part 59 - Volatile Organic Compound (VOC), Content Limits for Architectural Coatings

40:6.0.1.1.7.4.6.15.46 :

Table 1 to Subpart E of Part 59 - Product-Weighted Reactivity Limits by Coating Category

40:6.0.1.1.7.5.6.18.47 :

Table 2A to Subpart E of Part 59 - Reactivity Factors

40:6.0.1.1.7.5.6.18.48 :

Table 2B to Subpart E of Part 59 - Reactivity Factors for Aliphatic Hydrocarbon Solvent Mixtures

40:6.0.1.1.7.5.6.18.49 :

Table 2C to Subpart E of Part 59 - Reactivity Factors for Aromatic Hydrocarbon Solvent Mixtures

40:6.0.1.1.7.5.6.18.50 :