- CFR
- ›
- Title 40
- ›
- Chapter I
- ›
- Part 204
- ›
- Appendix Appendix I to Part 204
Appendix I to Part 204
Table I—Sample Size Code Letters
| Batch size | Code letter |
|---|
| 4 to 8 | A. |
| 9 to 15 | B. |
| 16 to 25 | C. |
| 26 and larger | D. |
Table II—Sampling Plans for Inspecting Batches
| Sample size code letter | Test sample | Test sample size | Cumulative test sample size | Batch inspection criteria |
|---|
| Acceptance number | Rejection number |
|---|
| A | 1st | 4 | 4 | 0 | 1 |
| B | 1st | 3 | 3 | 0 | 1 |
| C | 1st | 3 | 3 | 0 | 2 |
| | 2d | 3 | 6 | 1 | 2 |
| D | 1st | 2 | 2 | (1) | 2 |
| | 2d | 2 | 4 | (1) | 2 |
| | 3d | 2 | 6 | 0 | 2 |
| | 4th | 2 | 8 | 0 | 3 |
| | 5th | 2 | 10 | 1 | 3 |
| | 6th | 2 | 12 | 1 | 3 |
| | 7th | 2 | 14 | 2 | 3
|
| 1 Batch acceptance not permitted at this sample size. |
Table III—Batch Sequence Plans
| Sample size code letter | Number batches | Cumulative number batches | Sequence inspection criteria |
|---|
| Acceptance number | Rejection number |
|---|
| A | 2 | 2 | 1 | (1) |
| | 2 | 4 | 2 | 4 |
| | 2 | 6 | 3 | 5 |
| | 2 | 8 | 4 | 5 |
| B | 2 | 2 | 0 | (1) |
| | 2 | 4 | 1 | 4 |
| | 2 | 6 | 2 | 5 |
| | 2 | 8 | 3 | 5 |
| | 2 | 10 | 4 | 6 |
| | 2 | 12 | 5 | 6 |
| C | 2 | 2 | (2) | 2 |
| | 2 | 4 | 0 | 2 |
| | 2 | 6 | 0 | 3 |
| | 2 | 8 | 1 | 3 |
| | 2 | 10 | 2 | 4 |
| | 2 | 12 | 3 | 4 |
| D | 2 | 2 | 0 | 2 |
| | 2 | 4 | 1 | 3 |
| | 2 | 6 | 2 | 4 |
| | 2 | 8 | 3 | 4
|
| 1 Batch sequence rejection not permitted for this number of batches.
|
| 2 Batch sequence acceptance not permitted for this number of batches. |
Table IV—Recommended Format for Portable Air Compressor Noise Data Sheet
| | | | | |
| Test report number: | | | | |
| Subject: | | | | |
| Manufacturer: | Model: | Serial No.: | |
| Rated speed: | Rpm: | Rated capacity: | | cfm (m3/in). |
| Configuration identification: | Category identification: | | |
| Portable air compressor identification No.: | Build date: | | |
| Test conditions: | | | | |
| Manufacturer's test site identification and location: | |
| Reflecting plane composition: | |
| Operating speed as tested: | | | | |
| Beginning of test | rpm | | | |
| End of test | rpm | | | |
| Air pressure supplied: | psi (kg/cm2) | Ambient wind speed______mph (km/hr) | | |
| Actual flow rate: | cfm (m3/min.) | Atmospheric pressure______psi (kg/cm2) | | |
| Temperature: | °F (°C) | | | |
| Instrumentation: | | | | |
| Microphone Manufacturer: | Model No.: | Serial No.: | |
| Sound Level Meter Manufacturer: | Model No.: | Serial No.: | |
| Calibrator Manufacturer: | Model No.: | Serial No.: | |
| Other and Manufacturer: | Model No.: | Serial No.: | |
| Data: | | | | |
| Sound levels (decibels) | Background sound level at location 1 (decibels) | Location |
|---|
| 1 | 2 | 3 | 4 | 5 | Average sound level (decibels) |
|---|
| A-Weighted | | | | | | | |
| Tested by: | Date: | |
| Reported by: | Date: | |
| Supervisory personnel: | Title: | | |
| | | | | | Title: | | |