eCFR.io
Daily eCFR

Appendix A to Part 155—Specifications for Shore Connection

Specifications for Shore Connection

  1. CFR
  2. ›
  3. Title 33
  4. ›
  5. Chapter I
  6. ›
  7. Part 155
  8. ›
  9. Appendix Appendix A to Part 155
CorpusDaily eCFR
Displayed edition2026-04-15
Last updated2026-04-15

Appendix A to Part 155—Specifications for Shore Connection

[See §§ 340, 350, 370 and 380 of this part]

ItemDescriptionDimension
1Outside diameter215 mm. (8 in.).
2Inside diameterAccording to pipe outside diameter.
3Bolt circle diameter183 mm. (7 3⁄16 in.).
4Slots in flange6 holes 22 mm. (7⁄8 in.) in diameter shall be equidistantly placed on a bolt circle of the above diameter, slotted to the flange periphery. The slot width is to be 22 mm. (7⁄8 in.).
5Flange thickness20 mm. (3⁄4 in.).
6Bolts and nuts6, each of 20 mm. (3⁄4 in.) in diameter and of suitable length.
The flange must be of steel having a flat face, with a gasket of oilproof material, and must be suitable for a service pressure of 6 kg./cm.2 (85 p.s.i.).
The steel materials used must meet the material specifications of standard B16.5, Steel Pipe Flanges and Flanged Fittings of the American National Standards Institute. (See § 154.106 of this chapter.)

[CGD 75-124, 45 FR 7176, Jan. 31, 1980]