550.1167 What information must I submit with forms and for approvals§ 550.1167 What information must I submit with forms and for approvals?
You must submit the supporting information listed in the following table with the form identified in column 1 and for the approval required under this subpart identified in column 2:
|(1) Base map with surface, bottomhole, and completion locations with respect to the unit or lease line and the orientation of representative seismic lines or cross-sections|
|(2) Structure maps with penetration point and subsea depth for each well penetrating the reservoirs, highlighting subject wells; reservoir boundaries; and original and current fluid levels||√||√|
|(3) Net sand isopach with total net sand penetrated for each well, identified at the penetration point||*|
|(4) Net hydrocarbon isopach with net feet of pay for each well, identified at the penetration point||*|
|(b) Seismic data:|
|(1) Representative seismic lines, including strike and dip lines that confirm the structure; indicate polarity|
|(2) Amplitude extraction of seismic horizon, if applicable||√|
|(1) Well log sections with tops and bottoms of the reservoir(s) and proposed or existing perforations||√||√|
|(2) Structural cross-sections showing the subject well and nearby wells||√|
|(d) Engineering data:|
|(1) Estimated recoverable reserves for each well completion in the reservoir; total recoverable reserves for each reservoir; method of calculation; reservoir parameters used in volumetric and decline curve analysis||√|
|(2) Well schematics showing current and proposed conditions|
|(3) The drive mechanism of each reservoir||√||√|
|(4) Pressure data, by date, and whether they are estimated or measured||√|
|(5) Production data and decline curve analysis indicative of the reservoir performance||√|
|(6) Reservoir simulation with the reservoir parameters used, history matches, and prediction runs (include proposed development scenario)||*|
|(e) General information:|
|(1) Detailed economic analysis|
|(2) Reservoir name and whether or not it is competitive as defined under § 250.105||√||√|
|(3) Operator name, lessee name(s), block, lease number, royalty rate, and unit number (if applicable) of all relevant leases|
|(4) Geologic overview of project||√|
|(5) Explanation of why the proposed completion scenario will maximize ultimate recovery|
|(6) List of all wells in subject reservoirs that have ever produced or been used for injection||√|
* Additional items the Regional Supervisor may request.
Note: All maps must be at a standard scale and show lease and unit lines. The Regional Supervisor may waive submittal of some of the required data on a case-by-case basis.
(f) Depending on the type of approval requested, you must submit the appropriate payment of the service fee(s) listed in § 550.125, according to the instructions in § 550.126.