Subpart A—The Standard
Contents
-
1209.1
§ 1209.1 Scope and application. -
1209.2
§ 1209.2 Definitions and measurements. -
1209.3
§ 1209.3 General requirements. -
1209.4
§ 1209.4 Test procedures for determining settled density. -
1209.5
§ 1209.5 Test procedures for corrosiveness. -
1209.6
§ 1209.6 Test procedures for critical radiant flux. -
1209.7
§ 1209.7 Test procedures for smoldering combustion. -
1209.8
§ 1209.8 Procedure for calibration of radiation instrumentation. -
1209.9
§ 1209.9 Labeling requirement. -
1209.10
§ 1209.10 Certification and enforcement. -
1209.11
§ 1209.11 Effective date. -
Figure 1 to Subpart A of Part 1209
Figure 1 to Subpart A of Part 1209—Partial Insulation Preparation Apparatus -
Figure 2 to Subpart A of Part 1209
Figure 2 to Subpart A of Part 1209—Cyclone Receiver Weldment -
Figure 3 to Subpart A of Part 1209
Figure 3 to Subpart A of Part 1209—Flooring Radiant Tester Schematic Side Elevation -
Figure 4 to Subpart A of Part 1209
Figure 4 to Subpart A of Part 1209—Flooring Radiant Panel Tester Schematic Low Flux End, Elevation -
Figure 5 to Subpart A of Part 1209
Figure 5 to Subpart A of Part 1209—Zero Reference Point Related to Detecting Plane -
Figure 6 to Subpart A of Part 1209
Figure 6 to Subpart A of Part 1209—Dummy Specimen in Specimen Holder -
Figure 7 to Subpart A of Part 1209
Figure 7 to Subpart A of Part 1209—Specimen Tray -
Figure 8 to Subpart A of Part 1209
Figure 8 to Subpart A of Part 1209—Standard Radiant Heat Energy Flux Profile -
Figure 9 to Subpart A of Part 1209
Figure 9 to Subpart A of Part 1209—Flux Profile Data Log Format -
Figure 10 to Subpart A of Part 1209
Figure 10 to Subpart A of Part 1209—Insulation Radiant Panel Test Data Log Format