Title 16

PART 1209

Part 1209 - Interim Safety Standard For Cellulose Insulation

PART 1209 - INTERIM SAFETY STANDARD FOR CELLULOSE INSULATION Source:44 FR 39966, July 6, 1979, unless otherwise noted.

16:2.0.1.2.47.1SUBPART A
Subpart A - The Standard
16:2.0.1.2.47.1.1.1SECTION 1209.1
   1209.1 Scope and application.
16:2.0.1.2.47.1.1.2SECTION 1209.2
   1209.2 Definitions and measurements.
16:2.0.1.2.47.1.1.3SECTION 1209.3
   1209.3 General requirements.
16:2.0.1.2.47.1.1.4SECTION 1209.4
   1209.4 Test procedures for determining settled density.
16:2.0.1.2.47.1.1.5SECTION 1209.5
   1209.5 Test procedures for corrosiveness.
16:2.0.1.2.47.1.1.6SECTION 1209.6
   1209.6 Test procedures for critical radiant flux.
16:2.0.1.2.47.1.1.7SECTION 1209.7
   1209.7 Test procedures for smoldering combustion.
16:2.0.1.2.47.1.1.8SECTION 1209.8
   1209.8 Procedure for calibration of radiation instrumentation.
16:2.0.1.2.47.1.1.9SECTION 1209.9
   1209.9 Labeling requirement.
16:2.0.1.2.47.1.1.10SECTION 1209.10
   1209.10 Certification and enforcement.
16:2.0.1.2.47.1.1.11SECTION 1209.11
   1209.11 Effective date.
16:2.0.1.2.47.1.1.12.18APPENDIX
   Figure 1 to Subpart A of Part 1209 - Partial Insulation Preparation Apparatus
16:2.0.1.2.47.1.1.12.19APPENDIX
   Figure 2 to Subpart A of Part 1209 - Cyclone Receiver Weldment
16:2.0.1.2.47.1.1.12.20APPENDIX
   Figure 3 to Subpart A of Part 1209 - Flooring Radiant Tester Schematic Side Elevation
16:2.0.1.2.47.1.1.12.21APPENDIX
   Figure 4 to Subpart A of Part 1209 - Flooring Radiant Panel Tester Schematic Low Flux End, Elevation
16:2.0.1.2.47.1.1.12.22APPENDIX
   Figure 5 to Subpart A of Part 1209 - Zero Reference Point Related to Detecting Plane
16:2.0.1.2.47.1.1.12.23APPENDIX
   Figure 6 to Subpart A of Part 1209 - Dummy Specimen in Specimen Holder
16:2.0.1.2.47.1.1.12.24APPENDIX
   Figure 7 to Subpart A of Part 1209 - Specimen Tray
16:2.0.1.2.47.1.1.12.25APPENDIX
   Figure 8 to Subpart A of Part 1209 - Standard Radiant Heat Energy Flux Profile
16:2.0.1.2.47.1.1.12.26APPENDIX
   Figure 9 to Subpart A of Part 1209 - Flux Profile Data Log Format
16:2.0.1.2.47.1.1.12.27APPENDIX
   Figure 10 to Subpart A of Part 1209 - Insulation Radiant Panel Test Data Log Format
16:2.0.1.2.47.2SUBPART B
Subpart B - Certification
16:2.0.1.2.47.2.1.1SECTION 1209.31
   1209.31 Purpose and applicability.
16:2.0.1.2.47.2.1.2SECTION 1209.32
   1209.32 Definitions.
16:2.0.1.2.47.2.1.3SECTION 1209.33
   1209.33 Reasonable testing program.
16:2.0.1.2.47.2.1.4SECTION 1209.34
   1209.34 Qualification testing.
16:2.0.1.2.47.2.1.5SECTION 1209.35
   1209.35 Product specification.
16:2.0.1.2.47.2.1.6SECTION 1209.36
   1209.36 Production testing.
16:2.0.1.2.47.2.1.7SECTION 1209.37
   1209.37 Corrective actions.
16:2.0.1.2.47.2.1.8SECTION 1209.38
   1209.38 Records.
16:2.0.1.2.47.2.1.9SECTION 1209.39
   1209.39 Certification of compliance.
16:2.0.1.2.47.2.1.10SECTION 1209.40
   1209.40 Certification responsibility, multiple parties.
16:2.0.1.2.47.2.1.11SECTION 1209.41
   1209.41 Effective date.