Title 16

PART 1203 SUBPART D

Subpart D - Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999

16:2.0.1.2.43.4.1.1SECTION 1203.51
   1203.51 Purpose and basis.
16:2.0.1.2.43.4.1.2SECTION 1203.52
   1203.52 Scope and effective date.
16:2.0.1.2.43.4.1.3SECTION 1203.53
   1203.53 Interim safety standards.
16:2.0.1.2.43.4.1.4.5APPENDIX
   Figure 1 to Part 1203 - Anatomical Planes
16:2.0.1.2.43.4.1.4.6APPENDIX
   Figure 2 to Part 1203 - ISO Headform-Basic, Reference, and Median Planes
16:2.0.1.2.43.4.1.4.7APPENDIX
   Figure 3 to Part 1203 - Location of Reference Plane
16:2.0.1.2.43.4.1.4.8APPENDIX
   Figure 4 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
16:2.0.1.2.43.4.1.4.9APPENDIX
   Figure 5 to Part 1203 - Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
16:2.0.1.2.43.4.1.4.10APPENDIX
   Figure 6 to Part 1203 - Field of Vision
16:2.0.1.2.43.4.1.4.11APPENDIX
   Figure 7 to Part 1203 - Typical Test Apparatus for Positional Stability Test
16:2.0.1.2.43.4.1.4.12APPENDIX
   Figure 8 to Part 1203 - Apparatus for Test of Retention System Strength
16:2.0.1.2.43.4.1.4.13APPENDIX
   Figure 9 to Part 1203 - Impact Test Apparatus
16:2.0.1.2.43.4.1.4.14APPENDIX
   Figure 10 to Part 1203 - Center of Gravity for Drop Assembly
16:2.0.1.2.43.4.1.4.15APPENDIX
   Figures 11, 12 and 13 to Part 1203 - Hemispherical Anvil and Curbstone Anvil