Part 1203—Safety Standard for Bicycle Helmets

1. CFR
2. ›
3. Title 16
4. ›
5. Chapter II
6. ›
7. Part 1203

Contents

• A
  Subpart A—The Standard Sections 1203.1–1203.17
• B
  Subpart B—Certification Sections 1203.30–1203.34
• C
  Subpart C—Recordkeeping Sections 1203.40–1203.41
• D
  Subpart D—Requirements For Bicycle Helmets Manufactured From March 17, 1995, Through March 10, 1999 Sections 1203.51–1203.53
• Figure 1 to Part 1203
  Figure 1 to Part 1203—Anatomical Planes
• Figure 2 to Part 1203
  Figure 2 to Part 1203—ISO Headform-Basic, Reference, and Median Planes
• Figure 3 to Part 1203
  Figure 3 to Part 1203—Location of Reference Plane
• Figure 4 to Part 1203
  Figure 4 to Part 1203—Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
• Figure 5 to Part 1203
  Figure 5 to Part 1203—Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
• Figure 6 to Part 1203
  Figure 6 to Part 1203—Field of Vision
• Figure 7 to Part 1203
  Figure 7 to Part 1203—Typical Test Apparatus for Positional Stability Test
• Figure 8 to Part 1203
  Figure 8 to Part 1203—Apparatus for Test of Retention System Strength
• Figure 9 to Part 1203
  Figure 9 to Part 1203—Impact Test Apparatus
• Figure 10 to Part 1203
  Figure 10 to Part 1203—Center of Gravity for Drop Assembly
• Figures 11, 12 and 13 to Part 1203
  Figures 11, 12 and 13 to Part 1203—Hemispherical Anvil and Curbstone Anvil