Appendix K to Part 110 - Illustrative List of Equipment and Components Under NRC Export Licensing Authority for Use in a Plant for the Production of Heavy Water, Deuterium and Deuterium Compounds
10:2.0.1.1.20.11.139.7.32 : Appendix K
Appendix K to Part 110 - Illustrative List of Equipment and
Components Under NRC Export Licensing Authority for Use in a Plant
for the Production of Heavy Water, Deuterium and Deuterium
Compounds Note:
Heavy water can be produced by a variety of processes. However,
two processes have proven to be commercially viable: The
water-hydrogen sulphide exchange process (GS process) and the
ammonia-hydrogen exchange process.
A. The GS process is based upon the exchange of hydrogen and
deuterium between water and hydrogen sulphide within a series of
towers which are operated with the top section cold and the bottom
section hot. Water flows down the towers while the hydrogen
sulphide gas circulates from the bottom to the top of the towers. A
series of perforated trays are used to promote mixing between the
gas and the water. Deuterium migrates to the water at low
temperatures and to the hydrogen sulphide at high temperatures. Gas
or water, enriched in deuterium, is removed from the first stage
towers at the junction of the hot and cold sections and the process
is repeated in subsequent stage towers. The product of the last
stage, water enriched up to 30 percent in deuterium, is sent to a
distillation unit to produce reactor grade heavy water;
i.e., 99.75 percent deuterium oxide.
B. The ammonia-hydrogen exchange process can extract deuterium
from synthesis gas through contact with liquid ammonia in the
presence of a catalyst. The synthesis gas is fed into exchange
towers and then to an ammonia converter. Inside the towers the gas
flows from the bottom to the top while the liquid ammonia flows
from the top to the bottom. The deuterium is stripped from the
hydrogen in the synthesis gas and concentrated in the ammonia. The
ammonia then flows into an ammonia cracker at the bottom of the
tower while the gas flows into an ammonia converter at the top.
Further enrichment takes place in subsequent stages and
reactor-grade heavy water is produced through final distillation.
The synthesis gas feed can be provided by an ammonia plant that can
be constructed in association with a heavy water ammonia-hydrogen
exchange plant. The ammonia-hydrogen exchange process can also use
ordinary water as a feed source of deuterium.
C.1. Much of the key equipment for heavy water production plants
using either the GS process or the ammonia-hydrogen exchange
process are common to several segments of the chemical and
petroleum industries; particularly in small plants using the GS
process. However, few items are available “off-the-shelf.” Both
processes require the handling of large quantities of flammable,
corrosive, and toxic fluids at elevated pressures. Therefore, in
establishing the design and operating standards for plants and
equipment using these processes, careful attention to materials
selection and specifications is required to ensure long service
life with high safety and reliability factors. The choice is
primarily a function of economics and need. Most equipment,
therefore, is prepared to customer requirements.
In both processes, equipment which individually is not
especially designed or prepared for heavy water production can be
assembled into especially designed or prepared systems for
producing heavy water. Examples of such systems are the catalyst
production system used in the ammonia-hydrogen exchange process and
the water distillation systems used for the final concentration of
heavy water to reactor-grade in either process.
C.2. Equipment especially designed or prepared for the
production of heavy water utilizing either the water-hydrogen
sulphide exchange process or the ammonia-hydrogen exchange
process:
(i) Water-hydrogen Sulphide Exchange Towers.
Exchange towers with diameters of 1.5 m or greater and capable
of operating at pressures greater than or equal to 2 MPa (300 psi)
especially designed or prepared for heavy water production
utilizing the water-hydrogen sulphide exchange process.
(ii) Blowers and Compressors.
Single stage, low head (i.e., 0.2 MPa or 30 psi)
centrifugal blowers or compressors for hydrogen-sulphide gas
circulation (i.e., gas containing more than 70 percent H2S).
The blowers or compressors have a throughput capacity greater than
or equal to 56 m 3/second (120,000 standard cubic feet per minute)
while operating at pressures greater than or equal to 1.8 MPa (260
psi) suction and have seals designed for wet H2S service.
(iii) Ammonia-Hydrogen Exchange Towers.
Ammonia-hydrogen exchange towers greater than or equal to 35 m
(114.3 ft) in height with diameters of 1.5 m (4.9 ft) to 2.5 m (8.2
ft) capable of operating at pressures greater than 15 MPa (2225
psi). The towers have at least one flanged, axial opening of the
same diameter as the cylindrical part through which the tower
internals can be inserted or withdrawn.
(iv) Tower Internals and Stage Pumps Used in the
Ammonia-hydrogen Exchange Process.
Tower internals include especially designed stage contactors
which promote intimate gas/liquid contact. Stage pumps include
especially designed submersible pumps for circulation of liquid
ammonia within a contacting stage internal to the stage towers.
(v) Ammonia Crackers Utilizing the Ammonia-hydrogen Exchange
Process.
Ammonia crackers with operating pressures greater than or equal
to 3 MPa (450 psi) especially designed or prepared for heavy water
production utilizing the ammonia-hydrogen exchange process.
(vi) Ammonia Synthesis Converters or Synthesis Units.
Ammonia synthesis converters or synthesis units especially
designed or prepared for heavy water production utilizing the
ammonia-hydrogen exchange process.
These converters or units take synthesis gas (nitrogen and
hydrogen) from an ammonia/hydrogen high-pressure exchange column
(or columns), and the synthesized ammonia is returned to the
exchange column (or columns).
(vii) Infrared Absorption Analyzers.
Infrared absorption analyzers capable of “on-line”
hydrogen/deuterium ratio analysis where deuterium concentrations
are equal to or greater than 90 percent.
(viii) Catalytic Burners Used in the Ammonia-hydrogen Exchange
Process.
Catalytic burners for the conversion of enriched deuterium gas
into heavy water especially designed or prepared for heavy water
production utilizing the ammonia-hydrogen exchange process.
(ix) Complete Heavy Water Upgrade Systems or Columns.
Complete heavy water upgrade systems or columns especially
designed or prepared for the upgrade of heavy water to
reactor-grade deuterium concentration. These systems, which usually
employ water distillation to separate heavy water from light water,
are especially designed or prepared to produce reactor-grade heavy
water (i.e., typically 99.75 percent deuterium oxide) from
heavy water feedstock of lesser concentration.
D. Any other components especially designed or prepared for use
in a plant for the production of heavy water, deuterium, and
deuterium compounds or in any of the components described in this
appendix.
[79 FR 39298, July 10, 2014]