';


Title 49 Part 179 → Subpart F → §179.400-18

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 179 → Subpart F → §179.400-18

Electronic Code of Federal Regulations e-CFR

Title 49 Part 179 → Subpart F → §179.400-18

e-CFR data is current as of November 7, 2019

Title 49Subtitle BChapter ISubchapter CPart 179Subpart F → §179.400-18


Title 49: Transportation
PART 179—SPECIFICATIONS FOR TANK CARS
Subpart F—Specification for Cryogenic Liquid Tank Car Tanks and Seamless Steel Tanks (Classes DOT-113 and 107A)


§179.400-18   Test of inner tank.

(a) After all items to be welded to the inner tank have been welded in place, the inner tank must be pressure tested at the test pressure prescribed in §179.401-1. The temperature of the pressurizing medium may not exceed 38 °C (100 °F) during the test. The inner tank must hold the prescribed pressure for a period of not less than ten minutes without leakage or distortion. In a pneumatic test, due regard for the protection of all personnel should be taken because of the potential hazard involved. After a hydrostatic test the container and piping must be emptied of all water and purged of all water vapor.

(b) Caulking of welded joints to stop leaks developed during the test is prohibited. Repairs to welded joints must be made as prescribed in AAR Specifications for Tank Cars, appendix W (IBR, see §171.7 of this subchapter).

[Amdt. 179-32, 48 FR 27708, June 16, 1983, as amended at 68 FR 75763, Dec. 31, 2003; 73 FR 57008, Oct. 1, 2008]


© e-CFR 2019

FR | USC | CFR | eCFR