';


Title 49 Part 179 → Subpart E → §179.300-18

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 179 → Subpart E → §179.300-18

Electronic Code of Federal Regulations e-CFR

Title 49 Part 179 → Subpart E → §179.300-18

e-CFR data is current as of November 18, 2019

Title 49Subtitle BChapter ISubchapter CPart 179Subpart E → §179.300-18


Title 49: Transportation
PART 179—SPECIFICATIONS FOR TANK CARS
Subpart E—Specifications for Multi-Unit Tank Car Tanks (Classes DOT-106A and 110AW)


§179.300-18   Stamping.

(a) To certify that the tank complies with all specification requirements, each tank shall be plainly and permanently stamped in letters and figures 38 inch high into the metal of valve end chime as follows:

(1) DOT Specification number.

(2) Material and cladding material if any (immediately below the specification number).

(3) Owner's or builder's identifying symbol and serial number (immediately below the material identification). The symbol shall be registered with the Bureau of Explosives, duplications are not authorized.

(4) Inspector's official mark (immediately below the owner's or builder's symbol).

(5) Date of original tank test (month and year, such as 1-64 for January 1964). This should be so placed that dates of subsequent tests may easily be added thereto.

(6) Water capacity—0000 pounds.

(b) A copy of the above stamping in letters and figures of the prescribed size stamped on a brass plate secured to one of the tank heads is authorized.


© e-CFR 2019

FR | USC | CFR | eCFR