';


Title 49 Part 179 → Subpart D → §179.220-8

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 179 → Subpart D → §179.220-8

Electronic Code of Federal Regulations e-CFR

Title 49 Part 179 → Subpart D → §179.220-8

e-CFR data is current as of November 7, 2019

Title 49Subtitle BChapter ISubchapter CPart 179Subpart D → §179.220-8


Title 49: Transportation
PART 179—SPECIFICATIONS FOR TANK CARS
Subpart D—Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW, 115AW, and 117AW)


§179.220-8   Tank heads.

(a) Tank heads of the inner container, inner container compartments and outer shell must be of approved contour, and may be flanged and dished or ellipsoidal for pressure on concave side.

(b) Flanged and dished heads must have main inside radius not exceeding 10 feet and inside knuckle radius must be not less than 334 inches for steel and alloy steel tanks nor less than 5 inches for aluminum alloy tanks.

(c) Ellipsoidal heads must be an ellipsoid of revolution in which the major axis must equal the diameter of the shell and the minor axis must be one-half the major axis.

[Amdt. 179-9, 36 FR 21341, Nov. 6, 1971]


© e-CFR 2019

FR | USC | CFR | eCFR