';


Title 49 Part 179 → Subpart D → §179.201-6

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 179 → Subpart D → §179.201-6

Electronic Code of Federal Regulations e-CFR

Title 49 Part 179 → Subpart D → §179.201-6

e-CFR data is current as of November 14, 2019

Title 49Subtitle BChapter ISubchapter CPart 179Subpart D → §179.201-6


Title 49: Transportation
PART 179—SPECIFICATIONS FOR TANK CARS
Subpart D—Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW, 115AW, and 117AW)


§179.201-6   Manways and manway closures.

(a) The manway cover for spec. DOT 104W, 111A60-ALW1, 111A60W1, 111A100ALW1, 111A-100W1, 111A100W3, or 111A100W6 must be designed to make it impossible to remove the cover while the interior of the tank is subjected to pressure.

(b) The manway cover for spec. DOT 11A60W5, or 111A100W5 must be made of a suitable metal. The top, bottom and edge of manway cover must be acid resistant material covered as prescribed in §179.201-3. Through-bolt holes must be lined with acid resistant material at least one-eighth inch in thickness. Cover made of metal not affected by the lading need not be acid resistant material covered.

(c) The manway ring and cover for specifications DOT-103CW, 103DW, 103EW, 111360W7, or 11A100W6 must be made of the metal and have the same inspection procedures specified in AAR Specifications for Tank Cars, appendix M, M3.03 (IBR, see §171.7 of this subchapter).

[Amdt. 179-10, 36 FR 21353, Nov. 6, 1971; 66 FR 45186, Aug. 28, 2001; 68 FR 48571, Aug. 14, 2003; 68 FR 75762, Dec. 31, 2003]


© e-CFR 2019

FR | USC | CFR | eCFR