';


Title 49 Part 179 → Subpart D → §179.200-13

Title 49 → Subtitle B → Chapter I → Subchapter C → Part 179 → Subpart D → §179.200-13

Electronic Code of Federal Regulations e-CFR

Title 49 Part 179 → Subpart D → §179.200-13

e-CFR data is current as of November 14, 2019

Title 49Subtitle BChapter ISubchapter CPart 179Subpart D → §179.200-13


Title 49: Transportation
PART 179—SPECIFICATIONS FOR TANK CARS
Subpart D—Specifications for Non-Pressure Tank Car Tanks (Classes DOT-111AW, 115AW, and 117AW)


§179.200-13   Manway ring or flange, pressure relief device flange, bottom outlet nozzle flange, bottom washout nozzle flange and other attachments and openings.

(a) These attachments shall be fusion welded to the tank and reinforced in an approved manner in compliance with the requirements of appendix E, figure 10, of the AAR Specifications for Tank Cars (IBR, see §171.7 of this subchapter).

(b) The opening in the manway ring must be at least 16 inches in diameter except that acid resistant lined manways must be at least 18 inches in diameter before lining.

(c) The manway ring or flange, shall be made of cast, forged or fabricated metal. The metal of the dome, tank, or nozzle must be compatible with the manway ring or flange, so that they may be welded together.

(d) The openings for the manway or other fittings shall be reinforced in an approved manner.

[Amdt. 179-40, 52 FR 13047, Apr. 20, 1987, as amended at 68 FR 75761, Dec. 31, 2003]


© e-CFR 2019

FR | USC | CFR | eCFR