Appendix II to Part 150 - Explanation of Figure 1
46:5.0.1.3.11.0.6.10.5 : Appendix II
Appendix II to Part 150 - Explanation of Figure 1
Definition of a hazardous reaction - As a first
approximation, a mixture of two cargoes is considered hazardous
when, under specified condition, the temperature rise of the
mixture exceeds 25 °C or a gas is evolved. It is possible for the
reaction of two cargoes to produce a product that is significantly
more flammable or toxic than the original cargoes even though the
reaction is non-hazardous from temperature or pressure
considerations, although no examples of such a reaction are known
at this time.
Chart format - There are different degrees of reactivity
among the various cargoes. Many of them are relatively
non-reactive: For example, aromatic hydrocarbons or paraffins.
Others will form hazardous combinations with many groups: For
example, the inorganic acids.
The cargo groups in the compatibility chart are separated into
two categories: 1 through 22 are “Reactive Groups” and 30 through
43 are “Cargo Groups”. Left unassigned and available for future
expansion are groups 23 through 29 and those past 43. Reactive
Groups contain products which are chemically the most reactive;
dangerous combinations may result between members of different
Reactive Groups and between members of Reactive Groups and Cargo
Groups. Products assigned to Cargo Groups, however, are much less
reactive; dangerous combinations involving these can be formed only
with members of certain Reactive Groups. Cargo Groups do not react
hazardously with one another.
Using the Compatibility Chart - The following procedure
explains how the compatibility chart should be used to find
compatibility information:
(1) Determine the group numbers of the two cargoes by referring
to the alphabetical listing of cargoes and the corresponding groups
(Table I). Many cargoes are listed under their parent names; unless
otherwise indicated, isomers or mixtures of isomers of a particular
cargo are assigned to the same group. For example, to find the
group number for Isobutyl Alcohol, look under the parent name Butyl
Alcohol. Similarly, the group number for para-Xylene is found under
the entry Xylene. If a cargo cannot be found in this listing,
contact the Coast Guard for a group determination (see §
150.140).
(2) If both group numbers are between 30 and 43 inclusive, the
products are compatible and the chart need not be used.
(3) If both group numbers do not fall between 30 and 43
inclusive, locate one of the numbers on the left of the chart
(Cargo Groups) and the other across the top (Reactive Groups).
(Note that if a group number is between 30 and 43, it can only be
found on the left side of the chart.) The box formed by the
intersection of the column and row containing the two numbers will
contain one of the following:
(a) Blank - The two cargoes are compatible.
(b) “X” - The two cargoes are not compatible.
(Note that reactivity may vary among the group members. Refer to
Table I or Table II to find whether the products in question are
referenced by a footnote which indicates that exceptions exist and
are listed in Appendix I. Unless the combination is specifically
mentioned in Appendix I, it is compatible.)
Combination |
Groups |
Compatible |
Butyraldehyde/Acetic Acid |
19/4 |
Yes. |
Allyl
Alcohol/Toluene Diisocyanate |
15/12 |
No. |
Decene/Ethyl
Benzene |
30/32 |
Yes. |
Ethanolamine/Acetone |
8/18 |
Yes. |
Ammonia/Dimethylformamide |
6/10 |
No. |
[CGD 75-59, 45 FR 70263, Oct. 23, 1980, as amended by CGD 83-047,
50 FR 33046, Aug. 16, 1985]