Title 40

SECTION 147.303

147.303 Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule.

§ 147.303 Existing Class I, II (except enhanced recovery and hydrocarbon storage) and III wells authorized by rule.

Maximum injection pressure. The owner or operator shall limit injection pressure to the lesser of:

(a) A value which will not exceed the operating requirements of § 144.28(f)(3) (i) or (ii) as applicable; or

(b) A value for wellhead pressure calculated by using the following formula;

Pm = (0.733-0.433 Sg)d where: Pm = injection pressure at the wellhead in pounds per square inch Sg = specific gravity of injected fluid (unitless) d = injection depth in feet.

---