141.13 Maximum contaminant levels for turbidity.§ 141.13 Maximum contaminant levels for turbidity.
The maximum contaminant levels for turbidity are applicable to both community water systems and non-community water systems using surface water sources in whole or in part. The maximum contaminant levels for turbidity in drinking water, measured at a representative entry point(s) to the distribution system, are:
(a) One turbidity unit (TU), as determined by a monthly average pursuant to § 141.22, except that five or fewer turbidity units may be allowed if the supplier of water can demonstrate to the State that the higher turbidity does not do any of the following:
(1) Interfere with disinfection;
(2) Prevent maintenance of an effective disinfectant agent throughout the distribution system; or
(3) Interfere with microbiological determinations.
(b) Five turbidity units based on an average for two consecutive days pursuant to § 141.22.[40 FR 59570, Dec. 24, 1975] Editorial Note:At 54 FR 27527, June 29, 1989, § 141.13 was amended by adding introductory text; however, the amendment could not be incorporated because introductory text already exists.