Subpart C—Procedures for Determining Comparability Between Candidate Methods and Reference Methods

1. CFR
2. ›
3. Title 40
4. ›
5. Chapter I
6. ›
7. Part 53
8. ›
9. Subpart C

Contents

• 53.30
  § 53.30 General provisions.
• 53.31
  § 53.31 [Reserved]
• 53.32
  § 53.32 Test procedures for methods for SO₂, CO, O₃, and NO₂.
• 53.33
  § 53.33 Test Procedure for Methods for Lead (Pb).
• 53.34
  § 53.34 Test procedure for methods for PM₁₀ and Class I methods for PM _2.5.
• 53.35
  § 53.35 Test procedure for Class II and Class III methods for PM _2.5 and PM _−2.5.
• Appendix A to Subpart C of Part 53
  Appendix A to Subpart C of Part 53—References
• Figure C-1 to Subpart C of Part 53
  Figure C-1 to Subpart C of Part 53—Suggested Format for Reporting Test Results for Methods for SO ₂, CO, O ₃, NO ₂
• Figure C-2 to Subpart C of Part 53
  Figure C-2 to Subpart C of Part 53—Illustration of the Slope and Intercept Limits for Class II and Class III PM _2.5 Candidate Equivalent Methods
• Figure C-3 to Subpart C of Part 53
  Figure C-3 to Subpart C of Part 53—Illustration of the Slope and Intercept Limits for Class II and Class III PM _10-2.5 Candidate Equivalent Methods
• Figure C-4 to Subpart C of Part 53
  Figure C-4 to Subpart C of Part 53—Illustration of the Minimum Limits for Correlation Coefficient for PM _2.5 and PM _10-2.5 Class II and III Methods
• Table C-1 to Subpart C of Part 53
  Table C-1 to Subpart C of Part 53—Test Concentration Ranges, Number of Measurements Required, and Maximum Discrepancy Specifications
• Table C-2 to Subpart C of Part 53
  Table C-2 to Subpart C of Part 53—Sequence of Test Measurements
• Table C-3 to Subpart C of Part 53
  Table C-3 to Subpart C of Part 53—Test Specifications for Pb in TSP and Pb in PM ₁₀ Methods
• Table C-4 to Subpart C of Part 53
  Table C-4 to Subpart C of Part 53—Test Specifications for PM ₁₀, PM _2.5 and PM _10-2.5 Candidate Equivalent Methods
• Table C-5 to Subpart C of Part 53
  Table C-5 to Subpart C of Part 53—Summary of Comparability Field Testing Campaign Site and Seasonal Requirements for Class II and III FEMs for PM _10-2.5 and PM _2.5