1918.99 Retention of DOT markings, placards and labels.§ 1918.99 Retention of DOT markings, placards and labels.
(a) Any employer who receives a package of hazardous material that is required to be marked, labeled or placarded in accordance with the U.S. Department of Transportation's Hazardous Materials Regulations (49 CFR parts 171 through 180) shall retain those markings, labels and placards on the package until the packaging is sufficiently cleaned of residues and purged of vapors to remove any potential hazards.
(b) Any employer who receives a freight container, rail freight car, motor vehicle, or transport vehicle that is required to be marked or placarded in accordance with the Hazardous Materials Regulations shall retain those markings and placards on the freight container, rail freight car, motor vehicle or transport vehicle until the hazardous materials that require the marking or placarding are sufficiently removed to prevent any potential hazards.
(c) Markings, placards and labels shall be maintained in a manner that ensures that they are readily visible.
(d) For non-bulk packages that will not be reshipped, the provisions of the section are met if a label or other acceptable marking is affixed in accordance with OSHA's Hazard Communication Standard (29 CFR 1910.1200).
(e) For the purposes of this section, the term “hazardous material” has the same definition as in the Hazardous Materials Regulations (49 CFR parts 171 through 180).