Subpart CC—Cranes and Derricks in Construction

1. CFR
2. ›
3. Title 29
4. ›
5. Subtitle B
6. ›
7. Chapter XVII
8. ›
9. Part 1926
10. ›
11. Subpart CC

Contents

• 1926.1400
  § 1926.1400 Scope.
• 1926.1401
  § 1926.1401 Definitions.
• 1926.1402
  § 1926.1402 Ground conditions.
• 1926.1403
  § 1926.1403 Assembly/Disassembly—selection of manufacturer or employer procedures.
• 1926.1404
  § 1926.1404 Assembly/Disassembly—general requirements (applies to all assembly and disassembly operations).
• 1926.1405
  § 1926.1405 Disassembly—additional requirements for dismantling of booms and jibs (applies to both the use of manufacturer procedures and employer procedures).
• 1926.1406
  § 1926.1406 Assembly/Disassembly—employer procedures—general requirements.
• 1926.1407
  § 1926.1407 Power line safety (up to 350 kV)—assembly and disassembly.
• 1926.1408
  § 1926.1408 Power line safety (up to 350 kV)—equipment operations.
• 1926.1409
  § 1926.1409 Power line safety (over 350 kV).
• 1926.1410
  § 1926.1410 Power line safety (all voltages)—equipment operations closer than the Table A zone.
• 1926.1411
  § 1926.1411 Power line safety—while traveling under or near power lines with no load.
• 1926.1412
  § 1926.1412 Inspections.
• 1926.1413
  § 1926.1413 Wire rope—inspection.
• 1926.1414
  § 1926.1414 Wire rope—selection and installation criteria.
• 1926.1415
  § 1926.1415 Safety devices.
• 1926.1416
  § 1926.1416 Operational aids.
• 1926.1417
  § 1926.1417 Operation.
• 1926.1418
  § 1926.1418 Authority to stop operation.
• 1926.1419
  § 1926.1419 Signals—general requirements.
• 1926.1420
  § 1926.1420 Signals—radio, telephone or other electronic transmission of signals.
• 1926.1421
  § 1926.1421 Signals—voice signals—additional requirements.
• 1926.1422
  § 1926.1422 Signals—hand signal chart.
• 1926.1423
  § 1926.1423 Fall protection.
• 1926.1424
  § 1926.1424 Work area control.
• 1926.1425
  § 1926.1425 Keeping clear of the load.
• 1926.1426
  § 1926.1426 Free fall and controlled load lowering.
• 1926.1427
  § 1926.1427 Operator training, certification, and evaluation.
• 1926.1428
  § 1926.1428 Signal person qualifications.
• 1926.1429
  § 1926.1429 Qualifications of maintenance & repair employees.
• 1926.1430
  § 1926.1430 Training.
• 1926.1431
  § 1926.1431 Hoisting personnel.
• 1926.1432
  § 1926.1432 Multiple-crane/derrick lifts—supplemental requirements.
• 1926.1433
  § 1926.1433 Design, construction and testing.
• 1926.1434
  § 1926.1434 Equipment modifications.
• 1926.1435
  § 1926.1435 Tower cranes.
• 1926.1436
  § 1926.1436 Derricks.
• 1926.1437
  § 1926.1437 Floating cranes/derricks and land cranes/derricks on barges.
• 1926.1438
  § 1926.1438 Overhead & gantry cranes.
• 1926.1439
  § 1926.1439 Dedicated pile drivers.
• 1926.1440
  § 1926.1440 Sideboom cranes.
• 1926.1441
  § 1926.1441 Equipment with a rated hoisting/lifting capacity of 2,000 pounds or less.
• 1926.1442
  § 1926.1442 Railroad roadway maintenance machines.
• 1926.1443
  § 1926.1443 Severability.
• Appendix A to Subpart CC of Part 1926
  Appendix A to Subpart CC of Part 1926—Standard Hand Signals
• Appendix B to Subpart CC of Part 1926
  Appendix B to Subpart CC of Part 1926—Assembly/Disassembly: Sample Procedures for Minimizing the Risk of Unintended Dangerous Boom Movement
• Appendix C to Subpart CC of Part 1926
  Appendix C to Subpart CC of Part 1926—Operator Certification: Written Examination: Technical Knowledge Criteria