Title 16

PART 1512

Part 1512 - Requirements For Bicycles

PART 1512 - REQUIREMENTS FOR BICYCLES Authority:Secs. 2(f)(1)(D), (q)(1)(A), (s), 3(e)(1), 74 Stat. 372, 374, 375, as amended, 80 Stat. 1304-05, 83 Stat. 187-89 (15 U.S.C. 1261, 1262); Pub. L. 107-319, 116 Stat. 2776. Source:43 FR 60034, Dec. 22, 1978, unless otherwise noted.

• Authority: Secs. 2(f)(1)(D), (q)(1)(A), (s), 3(e)(1), 74 Stat. 372, 374, 375, as amended, 80 Stat. 1304-05, 83 Stat. 187-89 (15 U.S.C. 1261, 1262); Pub. L. 107-319, 116 Stat. 2776.
• Source: 43 FR 60034, Dec. 22, 1978, unless otherwise noted.

16:2.0.1.3.103.1	SUBPART A	Subpart A - Regulations
16:2.0.1.3.103.1.2.1	SECTION 1512.1	1512.1 Scope.
16:2.0.1.3.103.1.2.2	SECTION 1512.2	1512.2 Definitions.
16:2.0.1.3.103.1.2.3	SECTION 1512.3	1512.3 Requirements in general.
16:2.0.1.3.103.1.2.4	SECTION 1512.4	1512.4 Mechanical requirements.
16:2.0.1.3.103.1.2.5	SECTION 1512.5	1512.5 Requirements for braking system.
16:2.0.1.3.103.1.2.6	SECTION 1512.6	1512.6 Requirements for steering system.
16:2.0.1.3.103.1.2.7	SECTION 1512.7	1512.7 Requirements for pedals.
16:2.0.1.3.103.1.2.8	SECTION 1512.8	1512.8 Requirements for drive chain.
16:2.0.1.3.103.1.2.9	SECTION 1512.9	1512.9 Requirements for protective guards.
16:2.0.1.3.103.1.2.10	SECTION 1512.10	1512.10 Requirements for tires.
16:2.0.1.3.103.1.2.11	SECTION 1512.11	1512.11 Requirements for wheels.
16:2.0.1.3.103.1.2.12	SECTION 1512.12	1512.12 Requirements for wheel hubs.
16:2.0.1.3.103.1.2.13	SECTION 1512.13	1512.13 Requirements for front fork.
16:2.0.1.3.103.1.2.14	SECTION 1512.14	1512.14 Requirements for fork and frame assembly.
16:2.0.1.3.103.1.2.15	SECTION 1512.15	1512.15 Requirements for seat.
16:2.0.1.3.103.1.2.16	SECTION 1512.16	1512.16 Requirements for reflectors.
16:2.0.1.3.103.1.2.17	SECTION 1512.17	1512.17 Other requirements.
16:2.0.1.3.103.1.2.18	SECTION 1512.18	1512.18 Tests and test procedures.
16:2.0.1.3.103.1.2.19	SECTION 1512.19	1512.19 Instructions and labeling.
16:2.0.1.3.103.1.2.20	SECTION 1512.20	1512.20 Separability.
16:2.0.1.3.103.2	SUBPART B	Subpart B - Policies and Interpretations [Reserved]
16:2.0.1.3.103.3.2.1.41	APPENDIX	Figure 1 to Part 1512 - Bicycle Front Fork Cantilever Bending Test Rig
16:2.0.1.3.103.3.2.1.42	APPENDIX	Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles
16:2.0.1.3.103.3.2.1.43	APPENDIX	Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension
16:2.0.1.3.103.3.2.1.44	APPENDIX	Figures 6 and 7 to Part 1512 - Toe Clearance and Chain Guard Requirements
16:2.0.1.3.103.3.2.1.45	APPENDIX	Figure 8 to Part 1512 - Reflectorized Bicycle Wheel Rim Abrasion Test Device
16:2.0.1.3.103.3.2.1.46	APPENDIX	Table 1 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector 1
16:2.0.1.3.103.3.2.1.47	APPENDIX	Table 2 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector 1
16:2.0.1.3.103.3.2.1.48	APPENDIX	Table 3 to Part 1512 - Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test Procedure
16:2.0.1.3.103.3.2.1.49	APPENDIX	Table 4 to Part 1512 - Relative Energy Distribution of Sources

---