';


Title 16 Part 1203

Title 16 → Chapter II → Subchapter B → Part 1203

Electronic Code of Federal Regulations e-CFR

Title 16 Part 1203

Title 16Chapter IISubchapter BPart 1203


TITLE 16—Commercial Practices

CHAPTER II—CONSUMER PRODUCT SAFETY COMMISSION

SUBCHAPTER B—CONSUMER PRODUCT SAFETY ACT REGULATIONS

PART 1203—SAFETY STANDARD FOR BICYCLE HELMETS

rule

Subpart A—THE STANDARD

§1203.1
Scope, general requirements, and effective date.
§1203.2
Purpose and basis.
§1203.3
Referenced documents.
§1203.4
Definitions.
§1203.5
Construction requirements—projections.
§1203.6
Labeling and instructions.
§1203.7
Samples for testing.
§1203.8
Conditioning environments.
§1203.9
Test headforms.
§1203.10
Selecting the test headform.
§1203.11
Marking the impact test line.
§1203.12
Test requirements.
§1203.13
Test schedule.
§1203.14
Peripheral vision test.
§1203.15
Positional stability test (roll-off resistance).
§1203.16
Dynamic strength of retention system test.
§1203.17
Impact attenuation test.
rule

Subpart B—CERTIFICATION

§1203.30
Purpose, basis, and scope.
§1203.31
Applicability date.
§1203.32
Definitions.
§1203.33
Certification testing.
§1203.34
Product certification and labeling by manufacturers (including importers).
rule

Subpart C—RECORDKEEPING

§1203.40
Effective date.
§1203.41
Recordkeeping requirements.
rule

Subpart D—REQUIREMENTS FOR BICYCLE HELMETS MANUFACTURED FROM MARCH 17, 1995, THROUGH MARCH 10, 1999

§1203.51
Purpose and basis.
§1203.52
Scope and effective date.
§1203.53
Interim safety standards.
Appendix
Figure 1 to Part 1203—Anatomical Planes
Appendix
Figure 2 to Part 1203—ISO Headform-Basic, Reference, and Median Planes
Appendix
Figure 3 to Part 1203—Location of Reference Plane
Appendix
Figure 4 to Part 1203—Location of Test Lines for Helmets Intended for Persons Five (5) Years of Age and Older
Appendix
Figure 5 to Part 1203—Location of Test Lines for Helmets Intended for Persons Ages 1 and Older
Appendix
Figure 6 to Part 1203—Field of Vision
Appendix
Figure 7 to Part 1203—Typical Test Apparatus for Positional Stability Test
Appendix
Figure 8 to Part 1203—Apparatus for Test of Retention System Strength
Appendix
Figure 9 to Part 1203—Impact Test Apparatus
Appendix
Figure 10 to Part 1203—Center of Gravity for Drop Assembly
Appendix
Figures 11, 12 and 13 to Part 1203—Hemispherical Anvil and Curbstone Anvil