Title 50

SECTION 300.187

300.187 Validation requirements.

§ 300.187 Validation requirements.

(a) Imports. The approved consignment document accompanying any import of any fish or fish product regulated under this subpart must be validated by a government official from the issuing country, unless NMFS waives this requirement pursuant to an applicable RFMO recommendation. NMFS will furnish a list of countries for which government validation requirements are waived to the appropriate customs officials. Such list will indicate the circumstances of exemption for each issuing country and the non-government institutions, if any, accredited to validate statistical documents and re-export certificates for that country.

(b) Exports. The approved consignment document accompanying any export of fish or fish products regulated under this subpart must be validated, except pursuant to a waiver described in paragraph (d) of this section. Validation must be made by NMFS or another official authorized by NMFS.

(c) Re-exports. The approved re-export certificate accompanying any re-export of fish or fish products regulated under this subpart, as required under § 300.185(c), must be validated, except pursuant to a waiver described in paragraph (d) of this section. Validation must be made by NMFS or another official authorized by NMFS.

(d) Validation waiver. Any waiver of government validation will be consistent with applicable RFMO recommendations concerning validation of consignment documents and re-export certificates. If authorized, such waiver of government validation may include exemptions from government validation for Pacific bluefin tuna with individual BCD tags affixed pursuant to paragraph (f) of this section or for Atlantic bluefin tuna with tags affixed pursuant to § 635.5(b) of this title. Waivers will be specified on consignment documents and re-export certificates or accompanying instructions, or in a letter to permit holders from NMFS.

(e) Authorization for non-NMFS validation. An official from an organization or government agency seeking authorization to validate consignment documents or re-export certificates accompanying exports or re-exports from the United States, which includes U.S. commonwealths, territories, and possessions, must apply in writing, to NMFS, at an address designated by NMFS for such authorization. The application must indicate the procedures to be used for verification of information to be validated; list the names, addresses, and telephone/fax numbers of individuals to perform validation; procedures to be used to notify NMFS of validations; and an example of the stamp or seal to be applied to the consignment document or re-export certificate. NMFS, upon finding the applicant capable of verifying the information required on the consignment document or re-export certificate, will issue, within 30 days, a letter specifying the duration of effectiveness and conditions of authority to validate consignment documents or re-export certificates accompanying exports or re-exports from the United States. The effective date of such authorization will be delayed as necessary for NMFS to notify the appropriate RFMO of other officials authorized to validate consignment document or re-export certificates. Non-government organizations given authorization to validate consignment documents or re-export certificates must renew such authorization on a yearly basis.

(f) BCD tags. The requirements of this paragraph apply to Pacific bluefin tuna. Requirements for tagging Atlantic bluefin tuna are specified in § 635.5.

(1) Issuance. NMFS will issue numbered BCD tags for use on Pacific bluefin tuna upon request to each permit holder.

(2) Transfer. BCD tags for use on Pacific bluefin tuna issued under this section are not transferable and are usable only by the permit holder to whom they are issued.

(3) Affixing BCD tags. At the discretion of permit holders, a tag issued under this section may be affixed to each Pacific bluefin tuna purchased or received by the permit holder. If so tagged, the tag must be affixed to the tuna between the fifth dorsal finlet and the keel.

(4) Removal of tags. A tag, as defined in this subpart and affixed to any bluefin tuna, must remain on the tuna until it is cut into portions. If the bluefin tuna or bluefin tuna parts are subsequently packaged for transport for domestic commercial use or for export, the number of each dealer tag or BCD tag must be written legibly and indelibly on the outside of any package containing the bluefin tuna or bluefin tuna parts. Such tag number also must be recorded on any document accompanying the consignment of bluefin tuna or bluefin tuna parts for commercial use or export.

(5) Labeling. The number of a BCD tag affixed to each Pacific bluefin tuna under this section must be recorded on NMFS reports required by § 300.183, on any documents accompanying the consignment of Pacific bluefin tuna for domestic commercial use or export as indicated in § 300.185, and on any additional documents that accompany the consignment (e.g., bill of lading, customs manifest, etc.) of the tuna for commercial use or for export.

(6) Reuse. BCD tags issued under this section are separately numbered and may be used only once, one tag per Pacific bluefin tuna, to distinguish the purchase of one Pacific bluefin tuna. Once affixed to a tuna or recorded on any package, container or report, a BCD tag and associated number may not be reused.

[61 FR 35550, July 5, 1996, as amended at 73 FR 31388, June 2, 2008; 81 FR 18801, Apr. 1, 2016]