40:36.0.1.1.9.1 | SUBPART A
| **Subpart A - Overview and Applicability** | |

40:36.0.1.1.9.1.1.1 | SECTION 1045.1
| 1045.1 Does this part apply for my products | |

40:36.0.1.1.9.1.1.2 | SECTION 1045.2
| 1045.2 Who is responsible for compliance | |

40:36.0.1.1.9.1.1.3 | SECTION 1045.5
| 1045.5 Which engines are excluded from this part's requirements | |

40:36.0.1.1.9.1.1.4 | SECTION 1045.10
| 1045.10 How is this part organized | |

40:36.0.1.1.9.1.1.5 | SECTION 1045.15
| 1045.15 Do any other CFR parts apply to me | |

40:36.0.1.1.9.1.1.6 | SECTION 1045.20
| 1045.20 What requirements apply to my vessels | |

40:36.0.1.1.9.1.1.7 | SECTION 1045.25
| 1045.25 How do the requirements related to evaporative emissions apply to engines and their fuel systems | |

40:36.0.1.1.9.1.1.8 | SECTION 1045.30
| 1045.30 Submission of information. | |

40:36.0.1.1.9.2 | SUBPART B
| **Subpart B - Emission Standards and Related Requirements** | |

40:36.0.1.1.9.2.1.1 | SECTION 1045.101
| 1045.101 What exhaust emission standards and requirements must my engines meet | |

40:36.0.1.1.9.2.1.2 | SECTION 1045.103
| 1045.103 What exhaust emission standards must my outboard and personal watercraft engines meet | |

40:36.0.1.1.9.2.1.3 | SECTION 1045.105
| 1045.105 What exhaust emission standards must my sterndrive/inboard engines meet | |

40:36.0.1.1.9.2.1.4 | SECTION 1045.107
| 1045.107 What are the not-to-exceed emission standards | |

40:36.0.1.1.9.2.1.5 | SECTION 1045.110
| 1045.110 How must my engines diagnose malfunctions | |

40:36.0.1.1.9.2.1.6 | SECTION 1045.112
| 1045.112 What are the standards for evaporative emissions | |

40:36.0.1.1.9.2.1.7 | SECTION 1045.115
| 1045.115 What other requirements apply | |

40:36.0.1.1.9.2.1.8 | SECTION 1045.120
| 1045.120 What emission-related warranty requirements apply to me | |

40:36.0.1.1.9.2.1.9 | SECTION 1045.125
| 1045.125 What maintenance instructions must I give to buyers | |

40:36.0.1.1.9.2.1.10 | SECTION 1045.130
| 1045.130 What installation instructions must I give to vessel manufacturers | |

40:36.0.1.1.9.2.1.11 | SECTION 1045.135
| 1045.135 How must I label and identify the engines I produce | |

40:36.0.1.1.9.2.1.12 | SECTION 1045.140
| 1045.140 What is my engine's maximum engine power | |

40:36.0.1.1.9.2.1.13 | SECTION 1045.145
| 1045.145 Are there interim provisions that apply only for a limited time | |

40:36.0.1.1.9.3 | SUBPART C
| **Subpart C - Certifying Engine Families** | |

40:36.0.1.1.9.3.1.1 | SECTION 1045.201
| 1045.201 What are the general requirements for obtaining a certificate of conformity | |

40:36.0.1.1.9.3.1.2 | SECTION 1045.205
| 1045.205 What must I include in my application | |

40:36.0.1.1.9.3.1.3 | SECTION 1045.210
| 1045.210 May I get preliminary approval before I complete my application | |

40:36.0.1.1.9.3.1.4 | SECTION 1045.220
| 1045.220 How do I amend the maintenance instructions in my application | |

40:36.0.1.1.9.3.1.5 | SECTION 1045.225
| 1045.225 How do I amend my application for certification to include new or modified engines or change an FEL | |

40:36.0.1.1.9.3.1.6 | SECTION 1045.230
| 1045.230 How do I select engine families | |

40:36.0.1.1.9.3.1.7 | SECTION 1045.235
| 1045.235 What emission testing must I perform for my application for a certificate of conformity | |

40:36.0.1.1.9.3.1.8 | SECTION 1045.240
| 1045.240 How do I demonstrate that my engine family complies with exhaust emission standards | |

40:36.0.1.1.9.3.1.9 | SECTION 1045.245
| 1045.245 How do I determine deterioration factors from exhaust durability testing | |

40:36.0.1.1.9.3.1.10 | SECTION 1045.250
| 1045.250 What records must I keep and what reports must I send to EPA | |

40:36.0.1.1.9.3.1.11 | SECTION 1045.255
| 1045.255 What decisions may EPA make regarding my certificate of conformity | |

40:36.0.1.1.9.4 | SUBPART D
| **Subpart D - Testing Production-line Engines** | |

40:36.0.1.1.9.4.1.1 | SECTION 1045.301
| 1045.301 When must I test my production-line engines | |

40:36.0.1.1.9.4.1.2 | SECTION 1045.305
| 1045.305 How must I prepare and test my production-line engines | |

40:36.0.1.1.9.4.1.3 | SECTION 1045.310
| 1045.310 How must I select engines for production-line testing | |

40:36.0.1.1.9.4.1.4 | SECTION 1045.315
| 1045.315 How do I know when my engine family fails the production-line testing requirements | |

40:36.0.1.1.9.4.1.5 | SECTION 1045.320
| 1045.320 What happens if one of my production-line engines fails to meet emission standards | |

40:36.0.1.1.9.4.1.6 | SECTION 1045.325
| 1045.325 What happens if an engine family fails the production-line testing requirements | |

40:36.0.1.1.9.4.1.7 | SECTION 1045.330
| 1045.330 May I sell engines from an engine family with a suspended certificate of conformity | |

40:36.0.1.1.9.4.1.8 | SECTION 1045.335
| 1045.335 How do I ask EPA to reinstate my suspended certificate | |

40:36.0.1.1.9.4.1.9 | SECTION 1045.340
| 1045.340 When may EPA revoke my certificate under this subpart and how may I sell these engines again | |

40:36.0.1.1.9.4.1.10 | SECTION 1045.345
| 1045.345 What production-line testing records must I send to EPA | |

40:36.0.1.1.9.4.1.11 | SECTION 1045.350
| 1045.350 What records must I keep | |

40:36.0.1.1.9.5 | SUBPART E
| **Subpart E - In-Use Testing** | |

40:36.0.1.1.9.5.1.1 | SECTION 1045.401
| 1045.401 What testing requirements apply to my engines that have gone into service | |

40:36.0.1.1.9.5.1.2 | SECTION 1045.405
| 1045.405 How does this program work | |

40:36.0.1.1.9.5.1.3 | SECTION 1045.410
| 1045.410 How must I select, prepare, and test my in-use engines | |

40:36.0.1.1.9.5.1.4 | SECTION 1045.415
| 1045.415 What happens if in-use engines do not meet requirements | |

40:36.0.1.1.9.5.1.5 | SECTION 1045.420
| 1045.420 What in-use testing information must I report to EPA | |

40:36.0.1.1.9.5.1.6 | SECTION 1045.425
| 1045.425 What records must I keep | |

40:36.0.1.1.9.6 | SUBPART F
| **Subpart F - Test Procedures** | |

40:36.0.1.1.9.6.1.1 | SECTION 1045.501
| 1045.501 How do I run a valid emission test | |

40:36.0.1.1.9.6.1.2 | SECTION 1045.505
| 1045.505 How do I test engines using discrete-mode or ramped-modal duty cycles | |

40:36.0.1.1.9.6.1.3 | SECTION 1045.515
| 1045.515 What are the test procedures related to not-to-exceed standards | |

40:36.0.1.1.9.6.1.4 | SECTION 1045.520
| 1045.520 What testing must I perform to establish deterioration factors | |

40:36.0.1.1.9.7 | SUBPART G
| **Subpart G - Special Compliance Provisions** | |

40:36.0.1.1.9.7.1.1 | SECTION 1045.601
| 1045.601 What compliance provisions apply to these engines | |

40:36.0.1.1.9.7.1.2 | SECTION 1045.605
| 1045.605 What provisions apply to engines already certified under the motor vehicle or Large SI programs | |

40:36.0.1.1.9.7.1.3 | SECTION 1045.610
| 1045.610 What provisions apply to using engines already certified to Small SI emission standards | |

40:36.0.1.1.9.7.1.4 | SECTION 1045.620
| 1045.620 What are the provisions for exempting engines used solely for competition | |

40:36.0.1.1.9.7.1.5 | SECTION 1045.625
| 1045.625 What requirements apply under the Diurnal Transition Program | |

40:36.0.1.1.9.7.1.6 | SECTION 1045.630
| 1045.630 What is the personal-use exemption. | |

40:36.0.1.1.9.7.1.7 | SECTION 1045.635
| 1045.635 What special provisions apply for small-volume engine manufacturers | |

40:36.0.1.1.9.7.1.8 | SECTION 1045.640
| 1045.640 What special provisions apply to branded engines | |

40:36.0.1.1.9.7.1.9 | SECTION 1045.645
| 1045.645 What special provisions apply for converting an engine to use an alternate fuel | |

40:36.0.1.1.9.7.1.10 | SECTION 1045.650
| 1045.650 Do delegated-assembly provisions apply for marine engines | |

40:36.0.1.1.9.7.1.11 | SECTION 1045.655
| 1045.655 What special provisions apply for installing and removing altitude kits | |

40:36.0.1.1.9.7.1.12 | SECTION 1045.660
| 1045.660 How do I certify outboard or personal watercraft engines for use in jet boats | |

40:36.0.1.1.9.8 | SUBPART H
| **Subpart H - Averaging, Banking, and Trading for Certification** | |

40:36.0.1.1.9.8.1.1 | SECTION 1045.701
| 1045.701 General provisions. | |

40:36.0.1.1.9.8.1.2 | SECTION 1045.705
| 1045.705 How do I generate and calculate exhaust emission credits | |

40:36.0.1.1.9.8.1.3 | SECTION 1045.706
| 1045.706 How do I generate and calculate evaporative emission credits | |

40:36.0.1.1.9.8.1.4 | SECTION 1045.710
| 1045.710 How do I average emission credits | |

40:36.0.1.1.9.8.1.5 | SECTION 1045.715
| 1045.715 How do I bank emission credits | |

40:36.0.1.1.9.8.1.6 | SECTION 1045.720
| 1045.720 How do I trade emission credits | |

40:36.0.1.1.9.8.1.7 | SECTION 1045.725
| 1045.725 What must I include in my application for certification | |

40:36.0.1.1.9.8.1.8 | SECTION 1045.730
| 1045.730 What ABT reports must I send to EPA | |

40:36.0.1.1.9.8.1.9 | SECTION 1045.735
| 1045.735 What records must I keep | |

40:36.0.1.1.9.8.1.10 | SECTION 1045.745
| 1045.745 What can happen if I do not comply with the provisions of this subpart | |

40:36.0.1.1.9.9 | SUBPART I
| **Subpart I - Definitions and Other Reference Information** | |

40:36.0.1.1.9.9.1.1 | SECTION 1045.801
| 1045.801 What definitions apply to this part | |

40:36.0.1.1.9.9.1.2 | SECTION 1045.805
| 1045.805 What symbols, acronyms, and abbreviations does this part use | |

40:36.0.1.1.9.9.1.3 | SECTION 1045.810
| 1045.810 What materials does this part reference | |

40:36.0.1.1.9.9.1.4 | SECTION 1045.815
| 1045.815 What provisions apply to confidential information | |

40:36.0.1.1.9.9.1.5 | SECTION 1045.820
| 1045.820 How do I request a hearing | |

40:36.0.1.1.9.9.1.6 | SECTION 1045.825
| 1045.825 What reporting and recordkeeping requirements apply under this part | |

40:36.0.1.1.9.9.1.7.15 | APPENDIX Appendix I
| Appendix I to Part 1045 - Summary of Previous Emission Standards | |

40:36.0.1.1.9.9.1.7.16 | APPENDIX Appendix II
| Appendix II to Part 1045 - Duty Cycles for Propulsion Marine Engines | |