Title 40
SECTION 467.34
467.34 New source performance standards.
§ 467.34 New source performance standards.Any new source subject to this subpart must achieve the following performance standards.
(a) There shall be no discharge allowance for wastewater pollutants from the degassing operation.
(b) The discharge of wastewater pollutants from the core and ancillary operations except those listed in paragraph (a) shall not exceed the values set forth below:
Subpart C CorePollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum extruded | ||
Chromium | 0.13 | 0.051 |
Cyanide | 0.068 | 0.027 |
Zinc | 0.35 | 0.14 |
Aluminum | 2.07 | 0.92 |
Oil and grease | 3.39 | 3.39 |
Suspended solids | 5.10 | 4.07 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum extruded | ||
Chromium | 0.11 | 0.045 |
Cyanide | 0.060 | 0.024 |
Zinc | 0.31 | 0.126 |
Aluminum | 1.82 | 0.81 |
Oil and grease | 2.98 | 2.98 |
Suspended solids | 4.47 | 3.58 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cast by semicontinuous methods | ||
Chromium | 0.49 | 0.20 |
Cyanide | 0.27 | 0.11 |
Zinc | 1.36 | 0.56 |
Aluminum | 8.12 | 3.60 |
Oil and grease | 13.29 | 13.29 |
Suspended solids | 19.94 | 15.95 |
pH | ( 1) | ( 1) |
1 The pH shall be maintained within the range of 7.0 to 10.0 at all times except for those situations when this waste stream is discharged separately and without commingling with any other wastewater in which case the pH shall be within the range of 6.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum quenched | ||
Chromium | 0.76 | 0.31 |
Cyanide | 0.41 | 0.17 |
Zinc | 2.08 | 0.86 |
Aluminum | 12.45 | 5.52 |
Oil and grease | 20.37 | 20.37 |
Suspended solids | 30.56 | 24.45 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum quenched | ||
Chromium | 0.76 | 0.31 |
Cyanide | 0.41 | 0.17 |
Zinc | 2.08 | 0.86 |
Aluminum | 12.45 | 5.52 |
Oil and grease | 20.37 | 20.37 |
Suspended solids | 30.56 | 24.45 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.067 | 0.027 |
Cyanide | 0.036 | 0.015 |
Zinc | 0.183 | 0.075 |
Aluminum | 1.094 | 0.485 |
Oil and grease | 1.79 | 1.79 |
Suspended solids | 2.69 | 2.15 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.52 | 0.21 |
Cyanide | 0.28 | 0.11 |
Zinc | 1.42 | 0.59 |
Aluminum | 8.50 | 3.77 |
Oil and grease | 13.91 | 13.91 |
Suspended solids | 20.87 | 16.70 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Pollutant or pollutant property | NSPS | |
---|---|---|
Maximum for any 1 day | Maximum for monthly average | |
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched | ||
Chromium | 0.72 | 0.29 |
Cyanide | 0.39 | 0.16 |
Zinc | 1.97 | 0.81 |
Aluminum | 11.81 | 5.24 |
Oil and grease | 19.33 | 19.33 |
Suspended solids | 29.00 | 23.20 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.