Title 40

SECTION 430.57

430.57 Pretreatment standards for new sources (PSNS).

§ 430.57 Pretreatment standards for new sources (PSNS).

Except as provided in 40 CFR 403.7, any new source subject to this subpart that introduces pollutants into a publicly owned treatment works must: comply with 40 CFR part 403; and achieve the following pretreatment standards for new sources (PSNS).

(a) (1) The following pretreatment standards apply to each indirect discharger in the calcium-,

magnesium-, or sodium-based sulfite pulp segment that is a new source:

Subpart E

[Production of Calcium-, Magnesium-, or Sodium-Based Sulfite Pulps]

Pollutant or pollutant property PSNS
Maximum for any 1 day Monthly
average
kg/kkg (or pounds per 1,000 lb) of product
AOX <ML a ( b)

a “<ML” means less than the minimum level specified in § 430.01(i) for the particular pollutant.

b This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(2)(i) The following standards apply to each indirect discharger in the ammonium-based sulfite pulp segment that is a new source:

Subpart E - Production of Ammonium-Based Sulfite Pulps

Pollutant or pollutant property PSNS
Maximum for any 1 day Monthly
average
TCDD a <ML b ( c)
TCDF a <ML b ( c)
Trichlorosyringol a <ML b ( c)
3,4,5-trichlorocatechol a <ML b ( c)
3,4,6-trichlorocatechol a <ML b ( c)
3,4,5-trichloroguaiacol a <ML b ( c)
3,4,6-trichloroguaiacol a <ML b ( c)
4,5,6-trichloroguaiacol a <ML b ( c)
2,4,5-trichlorophenol a <ML b ( c)
2,4,6-trichlorophenol a <ML b ( c)
Tetrachlorocatechol a <ML b ( c)
Tetrachloroguaiacol a <ML b ( c)
2,3,4,6-tetrachlorophenol a <ML b ( c)
Pentachlorophenol a <ML b ( c)

a These limitations do not apply with respect to fiber lines operated by any indirect discharger that discloses to the pretreatment control authority, at the time it submits the report required under 40 CFR 403.12 (b), (d), or (e), that it uses a TCF bleaching process at that fiber line.

b “<ML” means less than the minimum level specified in § 430.01(i) for the particular pollutant.

c This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(ii) The following pretreatment standards apply with respect to each new source fiber line operated by an indirect discharger producing ammonium-based sulfite pulps if the indirect discharger discloses to the pretreatment control authority in a report submitted under 40 CFR 403.12(b), (d), or (e) that it uses exclusively TCF bleaching processes at that fiber line:

Subpart E - Production of Ammonium-Based Sulfite Pulps

Pollutant or pollutant parameter PSNS (TCF)
Maximum for any 1 day Monthly
average
AOX <ML a ( b)

a “<ML” means less than the minimum level specified in § 430.01(i) for the particular pollutant.

b This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(3)(i) The following pretreatment standards apply to each indirect discharger in the specialty grade sulfite pulp segment that is a new source:

Subpart E - Production of Specialty Grade Sulfite Pulps

Pollutant or pollutant property PSNS
Maximum for any 1 day Monthly
average
TCDD a <ML b ( c)
TCDF a <ML b ( c)
Trichlorosyringol a <ML b ( c)
3,4,5-trichlorocatechol a <ML b ( c)
3,4,6-trichlorocatechol a <ML b ( c)
3,4,5-trichloroguaiacol a <ML b ( c)
3,4,6-trichloroguaiacol a <ML b ( c)
4,5,6-trichloroguaiacol a <ML b ( c)
2,4,5-trichlorophenol a <ML b ( c)
2,4,6-trichlorophenol a <ML b ( c)
Tetrachlorocatechol a <ML b ( c)
Tetrachloroguaiacol a <ML b ( c)
2,3,4,6-tetrachlorophenol a <ML b ( c)
Pentachlorophenol a <ML b ( c)

a These limitations do not apply with respect to fiber lines operated by any indirect discharger that discloses to the pretreatment control authority, at the time it submits the report required under 40 CFR 403.12 (b), (d), or (e), that it uses a TCF bleaching process at that fiber line.

b “<ML” means less than the minimum level specified in § 430.01(i) for the particular pollutant.

c This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(ii) The following pretreatment standards apply with respect to each new source fiber line operated by an indirect discharger producing specialty grade sulfite pulps if the indirect discharger discloses to the pretreatment control authority in a report submitted under 40 CFR 403.12(b), (d), or (e) that it uses exclusively TCF bleaching processes at that fiber line:

Subpart E - Production of Specialty Grade Sulfite Pulps

Pollutant or pollutant parameter PSNS (TCF)
Maximum for any 1 day Monthly
average
AOX <ML a ( b)

a “<ML” means less than the minimum level specified in § 430.01(i) for the particular pollutant.

b This regulation does not specify this type of limitation for this pollutant; however, pretreatment control authorities may do so as appropriate.

(b) The following pretreatment standards shall apply to each new source indirect dischargers unless the indirect discharger certifies to the pretreatment control authority that it is not using these compounds as biocides. In cases when POTWs find it necessary to impose mass effluent standards, equivalent mass standards are provided as guidance:

Subpart E

Pollutant or pollutant property Supplemental PSNS
Maximum for any 1 day
kg/kkg (or pounds per 1,000 lb) of product Milligrams/liter
Pentachlorophenol 0.00058exp (0.017x) ((0.015)(9.12)exp(0.017x))/y
Trichlorophenol 0.0043exp (0.017x) ((0.114)(9.12)exp(0.017x))/y
x = percent sulfite pulp in final product.
y = wastewater discharged in kgal per ton of product.

(c) An indirect discharger must demonstrate compliance with the pretreatment standards in paragraphs (a)(2) or (a)(3) of this section, as applicable, by monitoring for all pollutants at the point where the wastewater containing those pollutants leaves the bleach plant.

[63 FR 18635, Apr. 15, 1998; 63 FR 42240, Aug. 7, 1998]