Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook 4910.1)
24:2.1.1.1.1.23.37.1.2 : Appendix A
Appendix A to Part 200 - Standards Incorporated by Reference in the
Minimum Property Standards for Housing (HUD Handbook 4910.1)
The following publications are incorporated by reference in the
HUD Minimum Property Standards (MPS) in 24 CFR part 200. The MPS
are available for public inspection and can be obtained for
appropriate use at 490 L'Enfant Plaza East, Suite 3214, or at each
HUD Regional, Area, and Service Office. Copies are available for
inspection at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, call 202-741-6030, or go to:
http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
The individual standards referenced in the MPS are available at the
address contained in the following table. They are also available
for public inspection at the HUD, Manufactured Housing and
Construction Standards Division, Suite 3214, 490 L'Enfant Plaza
East, Washington, DC 20024.
Air Conditioning Contractors of America 1513 16th Street, NW.,
Washington, DC 20036, (202) 483-9370. Load Calculation for
Residential Winter and Summer Air Conditioning, Manual J 1986
Aluminum Association, 900 19th Street, NW., Washington, DC 20006,
Telephone (202) 862-5100. AA-ASM 35-80 Specifications for Aluminum
Sheet Metal Work in Building Construction American Architectural
Manufacturers Association, 1540 East Dundee Road, Paletine, IL
60067, Telephone (708) 202-1350. AAMA-800-92 Voluntary
Specifications and Test Methods for Sealants AAMA-1503.1-88
Voluntary Test Method for Thermal Transmittance and Condensation
Resistance of Windows, Doors and Glazed Wall Sections AAMA 1504-88
Voluntary Standards for Thermal Performance of Windows, Doors and
Glazed Wall Sections American Concrete Institute, P. O. Box 19150,
Redford Station, Detroit, Michigan 48219, Telephone (313) 532-2600.
ACI 211.1-89 Standard Practice for Selecting Proportions for
Normal, Heavyweight and Mass Concrete ACI 211.2-91 Standard
Practice for Selecting Proportions for Structural Lightweight
Concrete ACI 213R-87 Guide for Structural Lightweight Aggregate
Concrete ACI 301-89 Specifications for Structural Concrete for
Buildings ACI 302.1R-80 Guide for Concrete Floor and Slab
Construction ACI 304R-89 Guide for Measuring, Mixing, Transporting
and Placing Concrete ACI 305R-77 Hot Weather Concreting (Revised
1989) ACI 306R-78 Cold Weather Concreting (Revised 1988) ACI
311.4R-80 Guide for Concrete Inspection (Revised 1988) ACI 315-80
Guide for Detailing of Concrete Reinforcement ACI 318-89 Building
Code Requirements for Reinforced Structural Plain Concrete (Revised
1992) ACI 322-72 Structural Plain Concrete ACI 347-78 Recommended
Practice for Concrete Formwork (Reapproved 1984) ACI 504R-77 Guide
to Joint Sealants for Concrete Structures ACI 506-90 Recommended
Practice for Shotcreting ACI 515.1R-79 A Guide to the Use of
Waterproofing, Dampproofing, Protective and Decorative Barrier
Systems for Concrete (Revised 1985) ACI 533.1R-69 Quality Standards
and Tests for Precast Concrete Wall Panels ACI 533.2R-69 Selection
and Use of Materials for Precast Concrete Wall Panels ACI 533.3R-70
Fabrication, Handling and Erection of Precast Concrete Wall Panels
American Forest & Paper Association, (formerly National Forest
Products Association), 1250 Connecticut Ave., NW., Washington, DC
20036. National Design Specification for Wood Construction - 1991.
American National Standards Institute, 11 West 42nd Street, New
York, NY 10036, Telephone (212) 642-4900. ANSI A108.1A-92
Specifications for Installation of Ceramic Tile, in the Wet Set
Method with Portland Cement Mortar ANSI A137.1-1988 Specifications
for Ceramic Tile ANSI/BHMA A156.2-1989 Standard for Bored and
Preassembled Locks and Latches ANSI/NKCA A161.1-1985 Recommended
Performance and Construction Standards for Kitchen and Vanity
Cabinets (Approved March 18, 1986) ANSI A208.1-1989 Wood
Particleboard ANSI/AAMA 101-1988 Voluntary Specifications for
Aluminum Prime Windows and Sliding Glass Doors ANSI/AAMA
1002.10-1983 Voluntary Specifications for Aluminum Insulating Storm
Products for Windows and Sliding Glass Doors ANSI/AAMA 1102.7-1989
Voluntary Specifications for Aluminum Storm Doors ANSI/AAMA
1402-1986 Standard Specifications for Aluminum Siding, Soffit and
Fascia (ANSI Approved 1989) ANSI/ACI 214-77 Recommended Practice
for Evaluation of Strength Test Results of Concrete (Reapproved
1983) ANSI/AHA A135.4-1982 Basic Hardboard (Reaffirmed 1988)
ANSI/AHA A135.6-1990 Hardboard Siding ANSI/AHA A194.1-1985
Cellulosic Fiber Board ANSI/APA 1-1984 Mosaic-Parquet Hardboard
Slat Flooring ANSI/NSPI-1-91 Standard for Public Swimming Pools
ANSI Z34.1-1987 American National Standard for Certification,
Third-Party Certification Program ANSI Z124.5-1989 American
National Standard for Plastic Toilet Seats (Water Closet Seats)
American Society of Civil Engineers, 345 East 47th Street, New
York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and
Other Structures (Formerly ANSI A58.1) American Society of
Mechanical Engineers, 345 E 47th Street, New York, NY 10017.
ASME/ANSI A17.1-87 Safety Code for Elevators and Escalators
Including the A17.1b-89 Addenda ASME A 112.18.1M89 Plumbing Fixture
Fittings American Society for Testing and Materials, 1916 Race
Street, Philadelphia, PA 19103, Telephone (215) 299-5400. ASTM C
12-91 Standard Practice for Installing Vitrified Clay Pipe Lines
ASTM C 208-72 Insulating Board (Cellulosic Fiber), Structural and
Decorative (Reapproved 1982) ASTM C 209-84 Standard Methods of
Testing Insulating Board (Cellulosic Fiber), Structural and
Decorative ASTM C 216-91c Standard Specification for Facing Brick
(Solid Masonry Units Made from Clay or Shale) ASTM C 220-91
Standard Specification for Flat Asbestos-Cement Sheets ASTM C
221-91 Standard Specification for Corrugated Asbestos-Cement Sheets
ASTM C 223-91 Standard Specification for Asbestos-Cement Siding
ASTM C 509-91 Standard Specification for Elastomeric Cellular
Preformed Gasket and Sealing Material ASTM C 516-80 Standard
Specification for Vermiculite Loose Fill Thermal Insulation
(Reapproved 1985) ASTM C 549-81 Standard Specification for Perlite
Loose Fill Insulation (Reapproved 1986) ASTM C 578-92 Standard
Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C 640-83 Standard Specification for Insulation Board, Thermal
(Cork) ASTM C 726-88 Standard Specification for Mineral Fiber and
Roof Insulation Board ASTM C 739-91 Standard Specification for
Cellulosic Fiber (Wood-Based) Loose-Fill Thermal Insulation ASTM C
754-88 Standard Specification for Installation of Steel Framing
Members to Receive Screw-Attached Gypsum ASTM C 834-91 Standard
Specification for Latex Sealants ASTM C 841-90 Standard
Specification for Installation of Interior Lathing and Furring ASTM
C 842-85 Standard Specification for Application of Interior Gypsum
Plaster (Reapproved 1990) ASTM C 843-92 Standard Specification for
Application of Gypsum Veneer Plaster ASTM C 844-85 Standard
Specification for Application of Gypsum Base to Receive Gypsum
Veneer Plaster ASTM C 846-76 Standard Practice for Application of
Structural Insulating Board (Fiberboard) Sheathing (Reapproved
1982) ASTM C 864-90 Standard Specification for Dense Elastomeric
Compression Seal Gaskets, Setting Blocks and Spacers. ASTM C 926-90
Standard Specification for Application of Portland Cement-Based
Plaster ASTM C 1036-91 Standard Specification for Flat Glass ASTM D
1037-89 Standard Test Methods for Evaluating the Properties of
Wood-Base Fiber and Particle Panel Materials ASTM C 1048-91
Standard Specification for Heat-Treated Flat Glass-Kind HS, Kind FT
Coated and Uncoated Glass ASTM D 1557-91 Test Method for Laboratory
Compaction Characteristics of Soil Using the Modified Method
(56,000 ft-lbf/ft3 (2,700 kN-m/m3)) ASTM D 2316-75 Standard
Recommended Practice for Installing Bituminized Fiber Drain and
Sewer Pipe (Reapproved 1984) ASTM D 2321-89 Standard Practice for
Underground Installation of Thermoplastic Pipe for Sewers and Other
Gravity-Flow Applications ASTM D 3656-89 Standard Specifications
for Insect Screening and Louver Cloth Woven From Vinyl-Coated Glass
Yarns ASTM D 3679-92 Standard Specification for Rigid Poly (Vinyl
Chloride) (PVC) Siding ASTM E 72-80 Standard Methods of Conducting
Strength Tests of Panels for Building Construction ASTM E 283-91
Standard Test Method for Determining the Rate of Air Leakage
Through Exterior Windows, Curtain Walls, and Doors Under Specified
Pressure Differences Across the Spectrum ASTM E 330-90 Standard
Test Method for Structural Performance of Exterior Windows, Curtain
Walls, and Doors by Uniform Static Air Pressure Difference ASTM E
331-86 Standard Test Method for Water Penetration of Exterior
Windows, Curtain Walls, and Doors by Uniform Static Air Pressure
Difference ASTM E 380-91a Standard Practices for Use of the
International Systems of Units (SI) (the Modernized Metric System)
American Society of Heating, Refrigerating and Air Conditioning
Engineers, 1791 Tullie Circle, NE, Atlanta, GA 30329. ASHRAE
Handbook - Fundamentals - 1989. ASHRAE Cooling and Heating Load
Calculation Manual - GRP 158 1979. ASHRAE Handbook - Equipment -
1988. ASHRAE Handbook - HVAC Systems and Applications - 1987.
American Welding Society, 550 NW Le Jeune Road, P. O. Box 351040,
Miami, FL 33126, Telephone (305) 443-9353. ANSI/AWS D1.1-90
Structural Welding Code - Steel. ANSI/AWS D1.4-79 Structural
Welding Code-Reinforcing Steel. The Asphalt Institute, Asphalt
Institute Building, College Park, MD 20740 Telephone (301)
277-4258. MSI-1-81 Thickness Design - Asphalt Pavements for
Highways and Streets Asphalt Roofing Manufacturers Association,
6288 Montrose Road, Rockville, MD 20852, Telephone (301) 231-9050.
Residential Asphalt Roofing Manual - 1988. Carpet and Rug
Institute, 310 Holiday Avenue, Box 2048, Dalton, GA 30722-0048,
Telephone (404) 278-3176. How to Specify Commercial Carpet
Installation, 1984. Council of American Building Officials, Suite
708, 5203 Leesburg Pike, Falls Church, VA 22041, Telephone (703)
931-4533. CABO One and Two Family Dwelling Code 1992 edition with
Errata Package and 1993 Amendments. CABO Model Energy Code 1992
edition CABO/ANSI A117.1-92 Accessible and Usable Buildings and
Facilities. Department of Agriculture, Publications Division, 14th
and Independence Avenue, SW., Washington, DC 20050, Telephone (202)
447-3957. Agriculture Handbook No. 73, Wood Frame House
Construction Home and Garden Bulletin No. 64. Subterranean Termites
- Their Prevention and Control in Buildings, October 1983 Home and
Garden Bulletin No. 73, Wood Decay in Houses, How to Prevent and
Control It, May 1986 Department of Commerce, National Institute of
Standards and Technology, Gaithersburg, Maryland 20899, Telephone
(301) 975-4025. PS 1-83 Product Standard for Construction and
Industrial Plywood with Typical APA Trademarks. PS 2-92 Performance
Standard for Wood-Based Structural-Use Panels.
Commercial Standards:
CS 138-55 Insect Wire Screening CS 242-62 1 3/4” Steel Doors &
Frames Department of Defense, Naval Publication and Forms Center,
5801 Taber Road, Philadelphia, PA 19120, Telephone (215) 697-2179.
Federal Specifications:
L-S-125B Screening, Insect, Non-metallic Febuary 3, 1972 L-F-001641
Floor Covering Translucent or Transparent Vinyl Surface with
Backing - 1971 and Amendment 2 - September 24, 1982 L-F-00450A
Flooring, Vinyl Plastic (GSAFSS) - 1970 and Amendment 1, August 5,
1975 L-F-475A Floor Covering Vinyl, Surface Tile and Roll, with
Backing including Amendment 2 - February 9, 1971 HH-I-521F
Insulation Blankets, Thermal (Mineral Fiber - for Ambient
Temperatures - 1980) HH-I-526C Insulation Board, Thermal (Mineral
Fiber) - 1968 HH-I-529B Insulation Board, Thermal (Mineral
Aggregate) - 1971 HH-I-530B Insulation Board, Thermal, Unfaced,
Polyurethane or Polyisocyanurate and Interim I - 1982 HH-I-551E
Insulation Block and Boards, Thermal (Cellular Glass) Fiber, for
Ambient Temperatures, 1974 HH-I-558B Insulation Blocks, Boards,
Blankets, Felts Sleeving (Pipe and Tube Covering), and Pipe Fitting
Covering, Thermal (Mineral Fiber, Insulation Type) and Amendment 3
- 1976 HH-I-574B Insulation, Thermal (Perlite) and Interim
Amendment - 1976 HH-I-585C Insulation, Thermal (Vermiculite) and
Interim Amendment 1 - 1976 HH-I-1030B Insulation, Thermal (Mineral
Fiber, for Pneumatic or Poured Application) - 1980 HH-I-1252B
Insulation, Thermal Reflective, (Aluminum Foil) and Interim
Amendment 1 - 1976 HH-I-1972 Insulation Board, Thermal, Faced, Gen;
1, 2, 3, Polyurethane and Polyisocyanurate and 4, 5 & 6 Amendments
- 1985 LLL-I-535B Insulation Board, Thermal, Cellulosic Fiber, 1977
SS-S-346C Siding (Shingles, Clapboards, and Sheets) 1968 SS-T-312B
Tile, Floor: Asphalt, Rubber, Vinyl-Composition and Interim
Amendment - 1979 Department of Housing and Urban Development, 451
Seventh Street, SW., Mail Room B-133, Washington, DC 20410,
Telephone (202) 755-7440.
Handbooks:
4940.2-1973 Minimum Design Standards for Community Water Supply
Systems 4940.3-1992 Minimum Design Standards for Community Sewerage
Systems (Rev. 1-92) 4950.1-1988 Technical Suitability of Products
Program, Technical and Processing Procedures (Rev. 2 which includes
revisions and changes through October 24, 1991) 4930.2-1989 HUD
Intermediate MPS Supplement, Solar Heating & Domestic Hot Water
Systems
Use of Materials Bulletins:
25d Power Driven, Mechanically Driven and Manually Driven Fasteners
- 9/5/73 38h Grademarking of Lumber - 7/31/79 44c HUD/FHA Standard
for Carpet and Carpet Certification Program - 2/22/78 (Plus
Addendum 1 & 2) 48 Labels of Independent Programs for Certifying
Pressure-Treated Lumber and Plywood (Plus 5 Supplements - 11/15/67)
52a Quality Certification and Labeling for Wood Flush Doors -
10/7/75) 58a Acrylic Plastic Sheets for Glazing - 9/2/75 60 Field
Glued Plywood & Wood Frame Structural Floor Systems - 12/9/70 62a
Factory-Applied Laminated Roofing Systems Based on Chlorosulfonated
Polyethylene (CPSE) - 11/16/72 65 Controlled Density Cellular
Concrete Floor Fill - 10/11/73 67 Polycarbonate Plastic Sheets for
Glazing - 9/3/75 70a Particleboard Interior Stair Treads and
Certification Program - 5/19/82 71 Polystyrene Foam Insulation
Sheathing Board - 1/10/77 72 HUD Standard for Carpet Cushion -
2/6/80 76 Chlorinated Poly (Vinyl Chloride) CPVC and Polybutylene
(PB) Hot and Cold Water Distribution - 4/25/78 77a Cast Iron
Sanitary Drainage System with Hubless Pipe and Fittings - 3/28/80
78 Polyethylene (PE), Acrylonitrile-Butadiene-Styrene (ABS), Poly
Vinyl Chloride (PVC) and Polybutylene (PB) Plastic Piping for
Domestic Cold Water Service - 4/25/78 79a
Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride)
(PVC) Plastic Drain, Waste and Vent Pipe and Fittings - 3/7/82 80
Spray Applied Cellulosic Thermal Insulation - 10/31/79 101 HUD
Building Product Standards and Certification Program for Exterior
Wall Insulation and Finish Systems, July 26, 1993 Environmental
Protection Agency, Office of Drinking Water, 401 M Street, SW.,
Washington, DC 20460, Telephone (202) 382-5533. EPA 570/9-82-004
Manual of Individual Water Supply (NTIS-PB 85242279) Systems
(October 1982) Flat Glass Marketing Association, White Lakes
Professional, Building 3310 Harrison Street, Topeka, KS 66611,
Telephone (913) 266-7013. FGMA Glazing Manual - 1986. FGMA Sealant
Manual - 1990. Hardwood Plywood Manufacturers Association, P.O. Box
2789, 1825 Michael Faraday Drive, Reston, VA 22090, Telephone (703)
435-2900. ANSI/HPMA LHF-1987 Laminated Hardwood Flooring. Insect
Screening Weavers Assn., 2000 Maple Hill Street, P.O. Box 309,
Yorktown Heights, NY 10598. IWS-089 Insect Wire Screening (Wire
Fabric). National Academy of Sciences, 2101 Constitution Avenue,
NW., Washington, DC 20418. Publication 1571 Criteria for Selection
and Design of Residential Slabs-on-Ground, Report #33, Building
Research Advisory Board (BRAB), 1968. National Association of Home
Builders, Research Center, 400 Prince Georges Boulevard, Upper
Marlboro, MD 20772, Telephone (301) 249-4000. Insulation Manual,
Homes and Apartments - 1979. National Association of
Plumbing-Heating-Cooling Contractors, P.O. Box 6808, Falls Church,
VA 22046, Telephone (703) 237-8100. National Standard Plumbing Code
- 1993. National Fire Protection Association, Batterymarch Park,
Quincy, MA 02269, Telephone 1-800-344-3555. ANSI/NFPA 58-89
Standard for the Storage and Handling of Liquefied Petroleum Gases
NFPA 54-88 National Fuel Gas Code (ANSI Z223.1-1988) NFPA 70-93
National Electrical Code National Institute of Building Sciences,
1201 L Street, NW., Washington, DC 20005. Metric Guide for Federal
Construction - 1992. National Oak Flooring Manufacturers
Association, 22 North Front Street, Memphis, TN 38103. Official
Grading Rules, Oak, Beech, Birch, Hard Maple, Pecan (OFGR/Vol. 1,
No. 1/1986 and the 1989 Addendum). Hardwood Flooring
Finishing/Refinishing Manual, 1986. Hardwood Flooring Installation
Manual, 1986. National Roofing Contractors Association, One O'Hare
Centre, 6250 River Road, Rosemont, IL 60018, Telephone (708)
318-6722. NRCA Roofing and Waterproofing Manual, 1989. National
Terrazzo and Mosaic Association, 3166 Des Plaines Avenue, Suite
132, Des Plaines, IL 60018, Telephone (708) 635-7744. NTMA
Specifications, Details and Technical Data, “Terrazzo Ideas &
Design Guide”, 1990. National Wood Window and Door Association, 205
West Touhy Avenue, Park Ridge, IL 60018, Telephone (708) 299-5200.
ANSI/NWWDA IS 1-87 Industry Standard for Wood Flush Doors
ANSI/NWWDA IS 2-87 Industry Standard for Wood Windows NWWDA IS 3-88
Industry Standard for Wood Sliding Patio Doors ANSI/NWWDA IS 6-86
Industry Standard for Wood Stile and Rail Doors Post-tensioning
Institute, 301 West Osborn, Suite 3500, Phoenix, AZ 85013,
Telephone (602) 870-7540. Design and Construction of Post-tensioned
Slabs-on-Ground - 1980. Prestressed Concrete Institute, 175 West
Jackson Boulevard, Suite 1859, Chicago, IL 60604, Telephone (312)
786-0353. PCI MNL 116 Manual for Quality Control for Plants and
Production for Precast Prestressed Concrete Products - 1985 PCI MNL
117 Manual for Quality Control for Plants and Production of
Architectural Precast Concrete Products - 1977 Resilient Floor
Covering Institute, 966 Hungerford Drive, Suite 12-B, Rockville, MD
20850, Telephone (301) 340-8580. Recommended Installation
Specifications for Vinyl Composition, Solid Vinyl and Asphalt Tile
Floorings, 1987. Safety Glazing Certification Council, c/o ETL
Testing Laboratories, Industrial Park, Route 11, Cortland, New York
13045, Telephone (607) 753-6711. Certified Products Directory -
1990. Southern California Association of Cabinet Manufacturers,
1933 South Broadway, L. 39, Los Angeles, CA 90007, Telephone (213)
749-4355. Certified Construction Standards and Specifications,
Guide for Uniform Cabinet Specifications - 1973 (Revised 1985).
Steel Door Institute, 30200 Detroit Road, Cleveland, OH 44145,
Telephone (216) 899-0010. ANSI/SDI A123.1-82 Nomenclature for Steel
Doors and Steel Door Frames. Tile Council of America, Inc., Box
326, Princeton, NJ 08542-0326, Telephone (609) 921-7050. Handbook
for Ceramic Tile Installation - 1993. Underwriters Laboratories,
333 Pfingsten Road, Northbrook, IL 60062, Telephone (708) 272-8800.
Electrical Appliance and Utilization Equipment Directory, 1992.
Water Quality Association, 4151 Naperville Road, Lisle, IL 60532.
Telephone (708) 396-1600. WQA S-100 Household Commericial and
Portable Exchange Water Softeners - 1985 WQA S-200 Household and
Commercial Water Filters - 1988 WQA S-300 Point-of-Use, Low
Pressure Reverse Osmosis Drinking Water Systems - 1984 WQA S-400
Point-of-Use Distillation Drinking Water Systems - 1986 Wood
Moulding and Millwork Producers, P.O. Box 25278, Portland, OR
97225, Telephone (503) 292-9288. WM 3-79 Exterior Wood Door Frames
[58 FR 60250, Nov. 15, 1993]
