Title 49
SECTION 572.191
572.191 General description.
§ 572.191 General description.(a) The SID-IIsD Side Impact Crash Test Dummy, small adult female, is defined by:
(1) The drawings and specifications contained in the “Drawings and Specifications for SID-IIsD Small Female Crash Test Dummy, Part 572 Subpart V, July 1, 2008,” which includes the technical drawings and specifications described in Drawing 180-0000, the titles of which are listed in Table A;
Table A
| Component assembly | Drawing number |
|---|---|
| 6 Axis Head Assembly | 180-1000 |
| Neck Assembly | 180-2000 |
| Upper Torso Assembly | 180-3000 |
| Clamping Washer | 180-3005 |
| Lower Torso Assembly Complete | 180-4000 |
| Complete Leg Assembly, Left | 180-5000-1 |
| Complete Leg Assembly, Right | 180-5000-2 |
| Arm Assembly Left Molded | 180-6000-1 |
| Arm Assembly Right Molded | 180-6000-2 |
(2) The “Parts/Drawing List, Part 572 Subpart V, SID-IIsD,” dated July 1, 2008 and containing 7 pages,
(3) A listing of available transducers-crash test sensors for the SID-IIsD Side Impact Crash Test Dummy, 5th percentile adult female, is shown in drawing 180-0000 sheet 2 of 5, dated July 1, 2008,
(4) “Procedures for Assembly, Disassembly, and Inspection (PADI) of the SID-IIsD Side Impact Crash Test Dummy, July 1, 2008,” and,
(5) Sign convention for signal outputs reference document SAE J1733 Information Report, titled “Sign Convention for Vehicle Crash Testing,” dated July 12, 1994, incorporated by reference in § 572.200(k).
(b) Exterior dimensions of the SID-IIsD Small Adult Female Side Impact Crash Test Dummy are shown in drawing 180-0000 sheet 3 of 5, dated July 1, 2008.
(c) Weights and center of gravity locations of body segments are shown in drawing 180-0000 sheet 4 of 5, dated July 1, 2008.
(d) Adjacent segments are joined in a manner such that, except for contacts existing under static conditions, there is no additional contact between metallic elements of adjacent body segments throughout the range of motion.
(e) The structural properties of the dummy are such that the dummy conforms to this Subpart in every respect before use in any test similar to that set forth in Standard 214, Side Impact Protection (49 CFR 571.214).
[71 FR 75370, Dec. 14, 2006, as amended at 74 FR 29895, June 23, 2009]