Title 49

SECTION 572.181

572.181 General description.

§ 572.181 General description.

(a) The ES-2re Side Impact Crash Test Dummy, 50th Percentile Adult Male, is defined by:

(1) The drawings and specifications contained in the “Parts List and Drawings, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES-2re, Alpha Version), September 2009,” (incorporated by reference, see § 572.180), which includes the technical drawings and specifications described in Drawing 175-0000, the titles of which are listed in Table A;

Table A

Component assembly Drawing No.
Head Assembly 175-1000
Neck Assembly Test/Cert 175-2000
Neck Bracket Including Lifting Eyebolt 175-2500
Shoulder Assembly 175-3000
Arm Assembly-Left 175-3500
Arm Assembly-Right 175-3800
Thorax Assembly with Rib Extensions 175-4000
Abdominal Assembly 175-5000
Lumbar Spine Assembly 175-5500
Pelvis Assembly 175-6000
Leg Assembly, Left 175-7000-1
Leg Assembly, Right 175-7000-2
Neoprene Body Suit 175-8000

(2) “Parts/Drawings List, Part 572 Subpart U, Eurosid 2 with Rib Extensions (ES2re), September 2009,” containing 9 pages, incorporated by reference, see § 572.180,

(3) A listing of available transducers-crash test sensors for the ES-2re Crash Test Dummy is shown in drawing 175-0000 sheet 4 of 6, dated February 2008, incorporated by reference, see § 572.180,

(4) Procedures for Assembly, Disassembly and Inspection (PADI) of the ES-2re Side Impact Crash Test Dummy, February 2008, incorporated by reference, see § 572.180,

(5) Sign convention for signal outputs reference document SAE J1733 Information Report, titled “Sign Convention for Vehicle Crash Testing” dated December 1994, incorporated by reference, see § 572.180.

(b) Exterior dimensions of ES-2re test dummy are shown in drawing 175-0000 sheet 3 of 6, dated February 2008, incorporated by reference, see § 572.180.

(c) Weights of body segments (head, neck, upper and lower torso, arms and upper and lower segments) and the center of gravity location of the head are shown in drawing 175-0000 sheet 2 of 6, dated February 2008, incorporated by reference, see § 572.180.

(d) Adjacent segments are joined in a manner such that, except for contacts existing under static conditions, there is no additional contact between metallic elements of adjacent body segments throughout the range of motion.

(e) The structural properties of the dummy are such that the dummy conforms to this Subpart in every respect before use in any test similar to those in Standard No. 214, Side Impact Protection and Standard No. 201, Occupant Protection in Interior Impact.

[71 FR 75331, Dec. 14, 2006, as amended at 73 FR 33921, June 16, 2008; 76 FR 31866, June 2, 2011]