Title 49

SECTION 572.100

572.100 Incorporation by Reference.

§ 572.100 Incorporation by Reference.

(a) The drawings and specifications referred to in § 572.101 are hereby incorporated in subpart L by reference. These materials are thereby made part of this regulation. The Director of the Federal Register approved the materials incorporated by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of the materials may be inspected at NHTSA's Docket Section, 400 Seventh Street, S.W., room 5109, Washington, DC, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.

(b) The incorporated material is available as follows:

(1) Drawing number 92041-001, “Head Form Assembly,” (November 30, 1992); drawing number 92041-002, “Skull Assembly,” (November 30, 1992); drawing number 92041-003, “Skull Cap Plate Assembly,” (November 30, 1992); drawing number 92041-004, “Skull Cap Plate,” (November 30, 1992); drawing number 92041-005, “Threaded Pin,” (November 30, 1992); drawing number 92041-006, “Hex Nut,” (November 30, 1992); drawing number 92041-008, “Head Skin without Nose,” (November 30, 1992, as amended March 6, 1995); drawing number 92041-009, “Six-Axis Load Cell Simulator Assembly,” (November 30, 1992); drawing number 92041-011, “Head Ballast Weight,” (November 30, 1992); drawing number 92041-018, “Head Form Bill of Materials,” (November 30, 1992); drawing number 78051-148, “Skull-Head (cast) Hybrid III,” (May 20, 1978, as amended August 17, 1978); drawing number 78051-228/78051-229, “Skin- Hybrid III,” (May 20, 1978, as amended through September 24, 1979); drawing number 78051-339, “Pivot Pin-Neck Transducer,” (May 20, 1978, as amended May 14, 1986); drawing number 78051-372, “Vinyl Skin Formulation Hybrid III,” (May 20, 1978); and drawing number C-1797, “Neck Blank, (August 1, 1989); drawing number SA572-S4, “Accelerometer Specification,” (November 30, 1992), are available from Reprographic Technologies, 1111 14th Street, N.W., Washington, DC 20005.

(2) A user's manual entitled “Free-Motion Headform User's Manual,” version 2, March 1995, is available from NHTSA's Docket Section at the address in paragraph (a) of this section.

(3) SAE Recommended Practice J211, OCT 1988, “Instrumentation for Impact Tests,” Class 1000, is available from The Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.

---