Title 49

PART 231

Part 231 - Railroad Safety Appliance Standards

PART 231 - RAILROAD SAFETY APPLIANCE STANDARDS Authority:49 U.S.C. 20102-20103, 20107, 20131, 20301-20303, 21301-21302, 21304; 28 U.S.C. 2461, note; and 49 CFR 1.89. Source:33 FR 19663, Dec. 25, 1968, unless otherwise noted. Note:

Where rivets or bolts are required in this part 231 a two-piece steel rivet may be used consisting of:

(a) A solid shank of one-half ( 1/2) inch minimum diameter steel or material of equal or greater strength having cold forged head on one end, a shank length for material thickness fastened, locking grooves, breakneck groove and pull grooves (all annular grooves) on the opposite end.

(b) A collar of similar material which is cold swaged into the locking grooves forming a head for the opposite end of item (a) after the pull groove section has been removed.

49:4.1.1.1.25.0.83.1SECTION 231.0
   231.0 Applicability and penalties.
49:4.1.1.1.25.0.83.2SECTION 231.1
   231.1 Box and other house cars built or placed in service before October 1, 1966.
49:4.1.1.1.25.0.83.3SECTION 231.2
   231.2 Hopper cars and high-side gondolas with fixed ends.
49:4.1.1.1.25.0.83.4SECTION 231.3
   231.3 Drop-end high-side gondola cars.
49:4.1.1.1.25.0.83.5SECTION 231.4
   231.4 Fixed-end low-side gondola and low-side hopper cars.
49:4.1.1.1.25.0.83.6SECTION 231.5
   231.5 Drop-end low-side gondola cars.
49:4.1.1.1.25.0.83.7SECTION 231.6
   231.6 Flat cars.
49:4.1.1.1.25.0.83.8SECTION 231.7
   231.7 Tank cars with side platforms.
49:4.1.1.1.25.0.83.9SECTION 231.8
   231.8 Tank cars without side sills and tank cars with short side sills and end platforms.
49:4.1.1.1.25.0.83.10SECTION 231.9
   231.9 Tank cars without end sills.
49:4.1.1.1.25.0.83.11SECTION 231.10
   231.10 Caboose cars with platforms.
49:4.1.1.1.25.0.83.12SECTION 231.11
   231.11 Caboose cars without platforms.
49:4.1.1.1.25.0.83.13SECTION 231.12
   231.12 Passenger-train cars with wide vestibules.
49:4.1.1.1.25.0.83.14SECTION 231.13
   231.13 Passenger-train cars with open-end platforms.
49:4.1.1.1.25.0.83.15SECTION 231.14
   231.14 Passenger-train cars without end platforms.
49:4.1.1.1.25.0.83.16SECTION 231.15
   231.15 Steam locomotives used in road service.
49:4.1.1.1.25.0.83.17SECTION 231.16
   231.16 Steam locomotives used in switching service.
49:4.1.1.1.25.0.83.18SECTION 231.17
   231.17 Specifications common to all steam locomotives.
49:4.1.1.1.25.0.83.19SECTION 231.18
   231.18 Cars of special construction.
49:4.1.1.1.25.0.83.20SECTION 231.19
   231.19 Definition of “Right” and “Left.”
49:4.1.1.1.25.0.83.21SECTION 231.20
   231.20 Variation in size permitted.
49:4.1.1.1.25.0.83.22SECTION 231.21
   231.21 Tank cars without underframes.
49:4.1.1.1.25.0.83.23SECTION 231.22
   231.22 Operation of track motor cars.
49:4.1.1.1.25.0.83.24SECTION 231.23
   231.23 Unidirectional passenger-train cars adaptable to van-type semi-trailer use.
49:4.1.1.1.25.0.83.25SECTION 231.24
   231.24 Box and other house cars with roofs, 16 feet 10 inches or more above top of rail. 1
49:4.1.1.1.25.0.83.26SECTION 231.25
   231.25 Track motorcars (self-propelled 4-wheel cars which can be removed from the rails by men).
49:4.1.1.1.25.0.83.27SECTION 231.26
   231.26 Pushcars.
49:4.1.1.1.25.0.83.28SECTION 231.27
   231.27 Box and other house cars without roof hatches or placed in service after October 1, 1966.
49:4.1.1.1.25.0.83.29SECTION 231.28
   231.28 Box and other house cars with roof hatches built or placed in service after October 1, 1966.
49:4.1.1.1.25.0.83.30SECTION 231.29
   231.29 Road locomotives with corner stairways.
49:4.1.1.1.25.0.83.31SECTION 231.30
   231.30 Locomotives used in switching service.
49:4.1.1.1.25.0.83.32SECTION 231.31
   231.31 Drawbars for freight cars; standard height.
49:4.1.1.1.25.0.83.33SECTION 231.33
   231.33 Procedure for special approval of existing industry safety appliance standards.
49:4.1.1.1.25.0.83.34SECTION 231.35
   231.35 Procedure for modification of an approved industry safety appliance standard for new railcar construction.