Title 40 Part 1051 → Subpart B → §1051.103
Title 40 → Chapter I → Subchapter U → Part 1051 → Subpart B → §1051.103
Electronic Code of Federal Regulations e-CFR
Title 40 Part 1051 → Subpart B → §1051.103
e-CFR data is current as of December 5, 2019
Title 40: Protection of Environment
PART 1051—CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES
Subpart B—Emission Standards and Related Requirements
§1051.103 What are the exhaust emission standards for snowmobiles?
(a) Apply the exhaust emission standards in this section by model year. Measure emissions with the snowmobile test procedures in subpart F of this part.
(1) Follow Table 1 of this section for exhaust emission standards. You may generate or use emission credits under the averaging, banking, and trading (ABT) program for HC and CO emissions, as described in subpart H of this part. This requires that you specify a family emission limit for each pollutant you include in the ABT program for each engine family. These family emission limits serve as the emission standards for the engine family with respect to all required testing instead of the standards specified in this section. An engine family meets emission standards even if its family emission limit is higher than the standard, as long as you show that the whole averaging set of applicable engine families meets the applicable emission standards using emission credits, and the vehicles within the family meet the family emission limit. The phase-in values specify the percentage of your U.S.-directed production that must comply with the emission standards for those model years. Calculate this compliance percentage based on a simple count of your U.S.-directed production units within each certified engine family compared with a simple count of your total U.S.-directed production units. Table 1 also shows the maximum value you may specify for a family emission limit, as follows:
Table 1 of §1051.103—Exhaust Emission Standards for Snowmobiles (g/kW-hr)
|Emission standards||Maximum allowable family emission limits|
|Phase 2||2010 and 2011||100||75||275|
|Phase 3||2012 and later||100||(1)||(1)||150||400|
(2) For Phase 3, the HC and CO standards are defined by a functional relationship. Choose your corporate average HC and CO standards for each year according to the following criteria:
(i) Prior to production, select the HC standard and CO standard (specified as g/kW-hr) so that the combined percent reduction from baseline emission levels is greater than or equal to 100 percent; that is, that the standards comply with the following equation:View or download PDF
(ii) Your corporate average HC standard may not be higher than 75 g/kW-hr.
(iii) Your corporate average CO standard may not be higher than 275 g/kW-hr.
(iv) You may use the averaging and banking provisions of subpart H of this part to show compliance with these HC and CO standards at the end of the model year under paragraph (a)(2)(i) of this section. You must comply with these final corporate average emission standards.
(b) The exhaust emission standards in this section apply for snowmobiles using the fuel type on which they are designed to operate. You must meet the numerical emission standards for hydrocarbons in this section based on the following types of hydrocarbon emissions for snowmobiles powered by the following fuels:
(1) Natural gas-fueled snowmobiles: NMHC emissions.
(2) Alcohol-fueled snowmobiles: THCE emissions.
(3) Other snowmobiles: THC emissions.
(c) Your snowmobiles must meet emission standards over their full useful life. The minimum useful life is 8,000 kilometers, 400 hours of engine operation, or five calendar years, whichever comes first. You must specify a longer useful life in terms of kilometers and hours for the engine family if the average service life of your vehicles is longer than the minimum value, as follows:
(1) Except as allowed by paragraph (c)(2) of this section, your useful life (in kilometers and hours) may not be less than either of the following:
(i) Your projected operating life from advertisements or other marketing materials for any vehicles in the engine family.
(ii) Your basic mechanical warranty for any engines in the engine family.
(2) Your useful life may be based on the average service life of vehicles in the engine family if you show that the average service life is less than the useful life required by paragraph (c)(1) of this section, but more than the minimum useful life (8,000 kilometers or 400 hours of engine operation). In determining the actual average service life of vehicles in an engine family, we will consider all available information and analyses. Survey data is allowed but not required to make this showing.
[67 FR 68347, Nov. 8, 2002, as amended at 70 FR 40487, July 13, 2005; 73 FR 35951, June 25, 2008; 73 FR 59246, Oct. 8, 2008]