';


Title 40 Part 1036

Title 40 → Chapter I → Subchapter U → Part 1036

Electronic Code of Federal Regulations e-CFR

Title 40 Part 1036

Title 40Chapter ISubchapter UPart 1036


TITLE 40—Protection of Environment

CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

SUBCHAPTER U—AIR POLLUTION CONTROLS

PART 1036—CONTROL OF EMISSIONS FROM NEW AND IN-USE HEAVY-DUTY HIGHWAY ENGINES

rule
§1036.1
Does this part apply for my engines?
§1036.2
Who is responsible for compliance?
§1036.5
Which engines are excluded from this part's requirements?
§1036.10
How is this part organized?
§1036.15
Do any other regulation parts apply to me?
§1036.30
Submission of information.

Subpart B—EMISSION STANDARDS AND RELATED REQUIREMENTS

§1036.100
Overview of exhaust emission standards.
§1036.108
Greenhouse gas emission standards.
§1036.115
Other requirements.
§1036.130
Installation instructions for vehicle manufacturers.
§1036.135
Labeling.
§1036.140
Primary intended service class and engine cycle.
§1036.150
Interim provisions.
rule

Subpart C—CERTIFYING ENGINE FAMILIES

§1036.205
What must I include in my application?
§1036.210
Preliminary approval before certification.
§1036.225
Amending my application for certification.
§1036.230
Selecting engine families.
§1036.235
Testing requirements for certification.
§1036.241
Demonstrating compliance with greenhouse gas emission standards.
§1036.250
Reporting and recordkeeping for certification.
§1036.255
What decisions may EPA make regarding my certificate of conformity?
rule

Subpart D—TESTING PRODUCTION ENGINES

§1036.301
Measurements related to GEM inputs in a selective enforcement audit.
rule

Subpart E—IN-USE TESTING

§1036.401
In-use testing.
rule

Subpart F—TEST PROCEDURES

§1036.501
How do I run a valid emission test?
§1036.505
Ramped-modal testing procedures.
§1036.510
Engine data and information for vehicle certification.
§1036.525
Hybrid engines.
§1036.530
Calculating greenhouse gas emission rates.
§1036.535
Determining steady-state engine fuel maps and fuel consumption at idle.
§1036.540
Determining cycle-average engine fuel maps.
rule

Subpart G—SPECIAL COMPLIANCE PROVISIONS

§1036.601
What compliance provisions apply?
§1036.605
GHG exemption for engines used in specialty vehicles.
§1036.610
Off-cycle technology credits and adjustments for reducing greenhouse gas emissions.
§1036.615
Engines with Rankine cycle waste heat recovery and hybrid powertrains.
§1036.620
Alternate CO2 standards based on model year 2011 compression-ignition engines.
§1036.625
In-use compliance with family emission limits (FELs).
§1036.630
Certification of engine GHG emissions for powertrain testing.
rule

Subpart H—AVERAGING, BANKING, AND TRADING FOR CERTIFICATION

§1036.701
General provisions.
§1036.705
Generating and calculating emission credits.
§1036.710
Averaging.
§1036.715
Banking.
§1036.720
Trading.
§1036.725
What must I include in my application for certification?
§1036.730
ABT reports.
§1036.735
Recordkeeping.
§1036.740
Restrictions for using emission credits.
§1036.745
End-of-year CO2 credit deficits.
§1036.750
What can happen if I do not comply with the provisions of this subpart?
§1036.755
Information provided to the Department of Transportation.
rule

Subpart I—DEFINITIONS AND OTHER REFERENCE INFORMATION

§1036.801
Definitions.
§1036.805
Symbols, abbreviations, and acronyms.
§1036.810
Incorporation by reference.
§1036.815
Confidential information.
§1036.820
Requesting a hearing.
§1036.825
Reporting and recordkeeping requirements.
Appendix
Appendix I to Part 1036 — Default Engine Fuel Maps for §1036.540

© e-CFR 2019

FR | USC | CFR | eCFR